Název: ADHESION OF BIOCOMPATIBLE TiNb COATING
Autoři: Kolegar, T. ; Matoušek, M. ; Vilémová, Monika ; Starý, V.
Typ dokumentu: Příspěvky z konference
Konference/Akce: Biomaterials and surfaces 2016, Herbertov (CZ), 20160920
Rok: 2017
Jazyk: eng
Abstrakt: Preparation of a coating with a high quality requires good adhesion of the film to the substrate. The paper deals with the adhesion of biocompatible TiNb coating with different base materials. Several materials such as titanium CP grade 2, titanium alloys Ti6Al4V and stainless steel AISI 316L were measured. Testing samples were made in the shape of small discs. Those samples were coated with a TiNb layer by using the PVD method (magnetron sputtering). Onto the measured layer of TiNb an assistant cylinder was stuck using a high strength epoxy adhesive E1100S. The sample with the assistant cylinder was fixed into a special fixture and the whole assembly underwent pull-off testing for adhesion. The main result of this experiment was determining the strength needed to peel the layer and morphology and size of the breakaway. As a result, we will be able to determine the best base material and conditions where the coating will be remain intact with the base material.
Klíčová slova: Adhesion; Biocompatible materials; Niobium; Pull-off test; PVD coating; Titanium
Zdrojový dokument: Acta Polytechnica CTU Proceedings, ISBN 978-80-01-06135-0
Poznámka: Související webová stránka: https://ojs.cvut.cz/ojs/index.php/APP/issue/view/554

Instituce: Ústav fyziky plazmatu AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0273905

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-364402


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky plazmatu
Konferenční materiály > Příspěvky z konference