|
|
Advanced Methods for 3D Video Capturing and Evaluation
Kaller, Ondřej ; Klíma, Miloš (referee) ; Masopust, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
Disertační práce se zabývá metodami snímání a hodnocení kvality 3D obrazů a videí. Po krátkém shrnutí fyziologie prostorového vnímání, obsahuje práce stav poznání v oblastech problému adaptivní paralaxy a konfigurace kamer pro snímání klasického stereopáru. Taktéž shrnuje dnešní možnosti odhadu hloubkové mapy. Zmíněny jsou aktivní i pasivní metody, detailněji je vysvětleno profilometrické skenování. Byly změřeny některé technické parametry dvou technologií současných 3D zobrazovačů, a to polarizačně-oddělujících a využívajících časový multiplex, například přeslechy mezi levým a pravým snímkem. Jádro práce tvoří nová metoda pro vytváření hloubkové mapy při snímání 3D scény, kterážto byla autorem navržena a testována. Inovativnost tohoto přístupu spočívá v chytré kombinaci současných aktivních a pasivních metod snímání hloubky scény, která vtipně využívá výhod obou metod. Nakonec jsou prezentovány výsledky subjektivních testů kvality 3D videa. Největší přínos zde má navržená metrika modelující výsledky subjektivních testů kvality 3D videa.
|
|
|
Study of electrical and dielectric properties of ionic liquids
Maráčková, Lucie ; Nešpůrek, Stanislav (referee) ; Zmeškal, Oldřich (advisor)
This bachelor´s thesis is focused on a study of electrical and dielectric properties of ionic liquids in the form of solution and thin layers. The values of breakdown voltage have been determined from current-voltage characteristics in solutions. Frequency dependencies have been also observed and used for calculation of values of parallel conductivity and capacity of ionic liquid. It was found that solutions is contained by model with one parallel combination of conductivity and capacity. Thin layers have been created by mixing up PEDOT:PSS with two ionic liquids: 1-butyl-3- methylimidazolium trifluoromethanesulfonate and 1-ethyl-3-methylimidazolium tetrafluoroborate. These layers have created electrochemical battery as is evident from current-voltage characteristics. Frequency dependencies are more complex, a model contained two or respectively three parallel conductivities and capacities which have been influenced by PEDOT:PSS and by ionic liquids characteristics.
|
|
|
Advanced materials for organic bioelectronics
Sedlák, Jiří ; Salyk, Ota (referee) ; Weiter, Martin (advisor)
This bachelor thesis deals with the research of PEDOT:DBSA material for possible use in organic bioelectronics. First, a method for preparing PEDOT:DBSA layers of required thickness was standardized and the dependence of the thickness on the conductivity of the material was monitored. Subsequently, the effect of thermal stabilization and EG, DMSO and H2SO4 substances on the conductivity of prepared layers was tested. Two principles were tested to increase conductivity. The first was the principle of adding substances as dopands into liquid polymeric solutions. The second method of sample preparation was the method of secondary treatment of already prepared layers of pure PEDOT:DBSA. All of prepared polymeric layers were characterize by two methods: four point probe and profilometry.
|
|
|
Study of optoelectrical properties of organic semiconductor thin film layers of phtalocyanines
Miklíková, Zdeňka ; Vala, Martin (referee) ; Zmeškal, Oldřich (advisor)
Diploma thesis is focused on the study of optoelectric properties of thin layers of organic materials based on phthalocyanines, which can be used as an active layer of photovoltaic cells. Especially are studied the properties of the thin active layers of PdPc and PdPc + IL on the glass or ceramic substrates with aluminium contact, which are prepared by material printing here. On the prepared samples were first measured current-voltage characteristics in the dark and in the light and then were measured impedance spectrums in the dark. The received results will be used to improve the properties and structures of photovoltaic cells.
|
|
|
Testing of multimodal holographic microscope in reflection mode
Kachtík, Lukáš ; Slabý, Tomáš (referee) ; Křížová, Aneta (advisor)
The thesis is focused on testing of reflection mode of Multimodal holographic microscope constructed in cooperation with TESCAN company. The assessment of axial and lateral resolution, verification of axial intensity response and documentation errors and deficiencies found while measuring are included in the testing procedure. In the conclusion, the Multimodal holographic microscope is compared to an atomic force microscop. A proper understanding of microscope operation and a formulation of an adjustment procedure were essential components of this work.
|
|
|
Optimization depozition variables during material printing of titania coatings
Mlčkovová, Hana ; Králová, Marcela (referee) ; Dzik, Petr (advisor)
This thesis studies the effect of conditions in the printing material layers of titanium dioxi-de sol-gel formulations for the print properties of the resulting films – TiO2, which were pre-pared from a precursor of titanium tetraisopropoxide (TTIP). Thin films were deposited on the printing material soda lime glass and the layer thickness was controlled by repeatedly apply-ing. Prepared films were subjected to observation under an optical microscope, and the thic-kness of the layers was measured by mechanical profilometry.
|
|
|
Depth profiling using laser-induced breakdown spectroscopy method
Průcha, Lukáš ; Novotný,, Karel (referee) ; Pořízka, Pavel (advisor)
The diploma thesis deals with the use of Laser-Induced Breakdown Spectroscopy (LIBS) for depth profiling and 3D mapping of the zinc-coated steel used in the automotive industry. Before creating depth maps and depth profiles, optimization of the experiment was performed. It was shown that the LIBS technique is suited for making depth profiles and depth maps. The theoretical part deals with the description of the LIBS instrumentation, characteristics of plasma, and assembling of scientific papers which reflect the up to date knowledge about depth profiling and mapping with the use of the LIBS technique. The experimental part describes the optimization of the experiment. Gate delay, the depth and the diameter of craters using the profilometer, the position of the focal plane relative to the sample surface, and selection of spectral lines with the smallest residual signal and small scattering of data were optimized. Depth profiles of zinc, iron, chromium and manganese with the depth map of zinc and iron were made, and also the depth resolution for both elements was calculated.
|
|
|
Automatization of method of surface structure measurement by means of reflection mode digital holographic microscope.
Vacula, Daniel ; Šerý, Mojmír (referee) ; Lovicar, Luděk (advisor)
Reflected-light digital holographic microscope developed at IPE FME BUT uses off-axis holography principle and low spatial and temporal coherence illumination. Microscope allows reconstruction of the image amplitude and the image phase, which can be handled in real time. The only limiting factors are imaging speed of the detector and computer performance when processing holograms. Reconstruction of image phase and amplitude allows high-resolution profilometric measurements in the vertical axis direction. This thesis deals with the automatization of profilometric measurement method proposed in [2]. Proposed method uses the combination of the image phase and the image amplitude for the measurement of specimens with surface structure the vertical size of which cause the uncertainty of the image phase by a factor of 2pí. Futher the thesis deals with the construction design of the illumination system of the microscope and its realization together with experimental verification of functionality of proposed method automatization.
|
|
|
Optical properties of protective emulsions
Valasová, Denisa ; Veselý, Michal (referee) ; Zmeškal, Oldřich (advisor)
This bachelor´s thesis is aimed to the study of optical properties of protective commercially available emulsions. Chosen emulsions should be responsible for sun protection. They also may be used in cosmetic industry. In the beginning of the thesis, there are defined theoretical features of emulsions and their interaction with UV radiation. Methods which are used to describe optical properties could be found in this section too. The optical properties were measured in thin layer films, in order to simulate emulsions applied on the human skin. UV-VIS spectrophotometry was mainly used to study the optical properties. The obtained results could serve, purely hypothetically, like sun protective tests of chosen emulsions.
|
|
|
Probe for Determining the Surface Condition of Small Diameter Barrels
Procházka, Adam ; Goldmann, Tomáš (referee) ; Malaník, Petr (advisor)
This thesis focuses on the analysis of methods for measuring surface profiles, as well as the design and implementation of a device for their measurement. The implemented device utilizes non-contact triangulation profilometry techniques to determine the surface profile by projecting a laser line onto the surface and capturing the projected shape at a non-zero observation angle. It alse collects information about the surface’s image texture under LED illumination. In addition to data on image texture and profile, data on the position of the captured images is also collected using a sensor measuring the device’s distance from the end of the barrel. The work also includes the design and implementation of custom control modules for the chosen LED and laser diode. The output from the device is presented in a user application. The device is designed to function in tubes with diameters from 40 millimeters.
|
guest ::
