|
| |
|
|
Summary of Unmanned Aerial Vehicle
Haman, Tomáš ; Navrátil, Jan (referee) ; Dofek, Ivan (advisor)
The bachelor’s thesis deals with summary of unmanned aircraft. There is a reference to their historical development and possible uses for the selected aircraft are their technical parameters, including pictures. Thesis contains several types of UAV division according to various criteria. From these categories was selected a few representatives, which is followed by each of them a few characteristic data. The last part is a comparison of several aircrafts between two close categories.
|
|
|
Methodology of identification of revisions and inspections of technical equipment for a manufacturing company based on the requirements of ISO 45001
Valenta, Jakub ; Jandová, Kristýna (referee) ; Bača, Petr (advisor)
This work deals with the issue of inspections and revisions of technical equipment according to safe operation standards on the basis of OSH and FP requirements. In the introduction, these fields of work safety and fire protection are described, which will be used in later parts of the work. Subsequently, the term „technical equipment“ and subcategories of this issue are defined, with each of the subcategories being specifically approached. As a result, the thesis describes why it is necessary to regularly inspect the technical equipment, while the individual types of inspections are subsequently defined. This is accompanied by the distribution of the person’s rights to carry out individual inspections and the distribution of responsibility for the inspections carried out. The acquired knowledge is then used to create a model of the process of regulation of inspections and revisions and to create an overview of periodic inspections and revisions of technical equipment for a manufacturing company. This model and review of inspections are then considered the output of this bachelor’s thesis.
|
|
|
Research of Autonomous Vehicles Report
Quinn, Cheney ; Kučera, Pavel (referee) ; Hejtmánek, Petr (advisor)
The bachelor thesis deals with the development of autonomous vehicles. The first part is focused on the characterization of autonomous vehicles and their classification according to SAE and NHTSA standards. In the second part there are technologies falling under individual levels of NHTSA. In the third part there is an overview of sensors used in autonomous vehicles for their operation. The fourth part deals with the development and the history of autonomous vehicles. The following part describes the current situation regarding inclusion and legislation around autonomous vehicles. The last part deals with current autonomous vehicles and the companies that produce autonomous cars and the methods they use to enhance their software.
|
|
|
Network Forensics Tools Survey and Taxonomy
Zembjaková, Martina ; Ryšavý, Ondřej (referee) ; Pluskal, Jan (advisor)
Táto diplomová práca sa zaoberá prieskumom a taxonómiou sieťových forenzných nástrojov. Popisuje základné informácie o sieťovej forenznej analýze, vrátane procesných modelov, techník a zdrojov dát používaných pri forenznej analýze. Ďalej práca obsahuje prieskum existujúcich taxonómií sieťových forenzných nástrojov vrátane ich porovnania, na ktorý naväzuje prieskum sieťových forenzných nástrojov. Diskutované sieťové nástroje obsahujú okrem nástrojov spomenutých v prieskume taxonómií aj niektoré ďalšie sieťové nástroje. Následne sú v práci detailne popísané a porovnané datasety, ktoré sú podkladom pre analýzu jednotlivými sieťovými nástrojmi. Podľa získaných informácií z vykonaných prieskumov sú navrhnuté časté prípady použitia a nástroje sú demonštrované v rámci popisu jednotlivých prípadov použitia. Na demonštrovanie nástrojov sú okrem verejne dostupných datasetov použité aj novo vytvorené datasety, ktoré sú detailne popísane vo vlastnej kapitole. Na základe získaných informácií je navrhnutá nová taxonómia, ktorá je založená na prípadoch použitia nástrojov na rozdiel od ostatných taxonómií založených na NFAT a NSM nástrojoch, uživateľskom rozhraní, zachytávaní dát, analýze, či type forenznej analýzy.
|
|
|
Summary of Micro Unmanned Aerial Vehicle
Krejčí, Jan ; Horák, Marek (referee) ; Dofek, Ivan (advisor)
This bachelor’s thesis deals with summary of miniature unmanned aerial vehicles. There is a reference to their historical development, the categorization of unmanned aerial vehicles and definition of category MAV. The thesis contains overview of some chosen representative members of category MAV and their parameters and picture documentation. The last part of this thesis deals with possible applications and basic information about artificial intelligence used for controlling these aerial vehicles.
|
|
|
Network Forensics Tools Survey and Taxonomy
Zembjaková, Martina ; Ryšavý, Ondřej (referee) ; Pluskal, Jan (advisor)
Táto diplomová práca sa zaoberá prieskumom a taxonómiou sieťových forenzných nástrojov. Popisuje základné informácie o sieťovej forenznej analýze, vrátane procesných modelov, techník a zdrojov dát používaných pri forenznej analýze. Ďalej práca obsahuje prieskum existujúcich taxonómií sieťových forenzných nástrojov vrátane ich porovnania, na ktorý naväzuje prieskum sieťových forenzných nástrojov. Diskutované sieťové nástroje obsahujú okrem nástrojov spomenutých v prieskume taxonómií aj niektoré ďalšie sieťové nástroje. Následne sú v práci detailne popísané a porovnané datasety, ktoré sú podkladom pre analýzu jednotlivými sieťovými nástrojmi. Podľa získaných informácií z vykonaných prieskumov sú navrhnuté časté prípady použitia a nástroje sú demonštrované v rámci popisu jednotlivých prípadov použitia. Na demonštrovanie nástrojov sú okrem verejne dostupných datasetov použité aj novo vytvorené datasety, ktoré sú detailne popísane vo vlastnej kapitole. Na základe získaných informácií je navrhnutá nová taxonómia, ktorá je založená na prípadoch použitia nástrojov na rozdiel od ostatných taxonómií založených na NFAT a NSM nástrojoch, uživateľskom rozhraní, zachytávaní dát, analýze, či type forenznej analýzy.
|
|
|
Modern patterns of use of selected non-traditional psychoactive substances
Dékány, Ladislav ; Bumba, Jakub (advisor) ; Tylš, Filip (referee)
Background: The popularity of new synthetic drugs together with rising interest in nootropics, microdosing and untraditional natural or synthetic substances has been influencing the development of drug scene. Unleashing repression in scientific research of these substances together with new information about their potential usage in psychotherapy, treatment of substance abuse, chronic pain and personality development profiles a new type of user, who is seeking enhancement in his cognitive, spiritual or intellectual functions with minimal health risks. Aim: The aim of this thesis is to describe psychoactive substance patterns of use, which we consider untraditional given the current culture and context, eventually nootropics and microdosing phenomenon. Specific aim of this thesis is to find motivation behind using psychoactive substances, compare consequences of this use between commonly abused stimulants, opiates and describe the effect these substances have on alcohol and tobacco consumption. Methods: Quantitative and qualitative methods were used. Data was collected with anonymous questionnaire. Research file (n = 35) was chosen based on intended selection and snowball sampling methods. Every participant must had at least one experience with untraditional psychoactive substance which were chosen...
|
|
|
Methodology of identification of revisions and inspections of technical equipment for a manufacturing company based on the requirements of ISO 45001
Valenta, Jakub ; Jandová, Kristýna (referee) ; Bača, Petr (advisor)
This work deals with the issue of inspections and revisions of technical equipment according to safe operation standards on the basis of OSH and FP requirements. In the introduction, these fields of work safety and fire protection are described, which will be used in later parts of the work. Subsequently, the term „technical equipment“ and subcategories of this issue are defined, with each of the subcategories being specifically approached. As a result, the thesis describes why it is necessary to regularly inspect the technical equipment, while the individual types of inspections are subsequently defined. This is accompanied by the distribution of the person’s rights to carry out individual inspections and the distribution of responsibility for the inspections carried out. The acquired knowledge is then used to create a model of the process of regulation of inspections and revisions and to create an overview of periodic inspections and revisions of technical equipment for a manufacturing company. This model and review of inspections are then considered the output of this bachelor’s thesis.
|
|
|
Research of Autonomous Vehicles Report
Quinn, Cheney ; Kučera, Pavel (referee) ; Hejtmánek, Petr (advisor)
The bachelor thesis deals with the development of autonomous vehicles. The first part is focused on the characterization of autonomous vehicles and their classification according to SAE and NHTSA standards. In the second part there are technologies falling under individual levels of NHTSA. In the third part there is an overview of sensors used in autonomous vehicles for their operation. The fourth part deals with the development and the history of autonomous vehicles. The following part describes the current situation regarding inclusion and legislation around autonomous vehicles. The last part deals with current autonomous vehicles and the companies that produce autonomous cars and the methods they use to enhance their software.
|
guest ::
