|
|
Bus wiring systems for complex building management
Mokrý, Lukáš ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The aim of my thesis is to examine current opportunities of bus wiring systems for complex building management, mainly its power and economic evaluation. It can be simply called intelligent electrical installation. I will examine two systems from INELS and ABB company. These systems contain functional components, mainly modules and controllers. By means of other materials, I’ll create a panel. Components will be placed there and electrically connected. After this, systems will be put into operation and programmed by means of their software. The next step is measuring of quatities during the various conditions of systems and consumption, which is one of the main aims of the thesis. Two apparatuses will be used for measuring. This thesis itself will contain theoretical analysis of systems, their description, using the way of operation and main advantages and disadvantages. Single components and complete process of measuring and working in laboratory will be described. An overall evaluation and comparison of the systems from various points of view, including the price, will be put together from results.
|
|
|
Stress-strain analysis of a crane arm
Mora, Lukáš ; Halabuk, Dávid (referee) ; Fuis, Vladimír (advisor)
The content of this bachelor’s work is a summarization of types of tower cranes and subsequent stress-strain analysis of the crane arm of the crane type 150EC-B8 Litronic located on the Šumavská street in Brno. Analytical stress-strain analysis is calculated with equations of equilibrium using joint method in various types of loading of the construction with MAPLE software. Numerical calculation is executed on 3D model of the construction in software ANSYS. The aim of this bachelor work is the verification of the correctness and comparison results of analytic calculation with numeric calculation and evaluation of the results from a limit states and deformation standpoint.
|
|
| |
|
|
Design of Experiment
Lachnit, Zdeněk ; Bednář, Josef (referee) ; Kotek, Luboš (advisor)
The main subject of this master thesis is to evaluate using of Design of Experiment in industrial company in the development of LED modules for cars. In background study Design of Experiment methodology is described. Next part of background study describes the general principles of termography measurements, next chapter includes the information’s about LED technology and temperature degradation. At the beginning of the practical part is a description of the team analysis due to selection of factors, next chapter validates importance of vias. In next chapter methodology of print circuit board preparations and measuring are described. A next chapter describes the implementation of design of experiment at voltages 8 V, 13,5 V, 16,5 V. Designs of Experiments were made for four or five factors. The reason for this decision was the manual adjustment of printed circuit boards. At the end of each Design of Experiment is the recommendation of factors and interactions settings with regard on response, which is the minimal temperature. At the end of master’s thesis is the final evaluation.
|
|
| |
|
|
Reinforced concrete load-bearing construction
Tmej, Patrik ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of the thesis is the strengthening and resistance of concrete construction. At the beginning is described composite reinforcement and their specific properties. The thesis specifically follows behavior concrete vault and the effects of load. Resistance vault is calculated by S&T model – strut and tie. Finally, the thesis contain strengthening construction by composite reinforcement. Strengthening is considered by two ways - strengthening by cohesive reinforcement and strengthening by incoherent reinforcement (wrapping).
|
|
|
Design of pneumobil driven by pneumatic motor
Podhorský, Petr ; Robenek, Dětřich (referee) ; Nevrlý, Josef (advisor)
Master thesis deals with design of "student" pneumatic car equipped by pneumatic elements of a chosen firm. The introductory part is devoted to mapping the Hungarian competition. The idea of designing such vehicles comes from this competition. Next step is analysis of vehicles that are present in this competition. The main part describes the development of vehicle from the initial design, through analysis of main components, through to the production and presentation. The work contains a strain-stress analysis of the frame which is made by using the finite element method. The work ends with the conclusion which assesses the results.
|
|
|
Pulse flow of liquid in flexible tube
Komoráš, Miroslav ; Šedivý, Dominik (referee) ; Klas, Roman (advisor)
This master’s thesis is dealing with analysis of fluid flow pulse in a flexible tube representing e.g. an artery in a human body. In ANSYS program, 3D simulations were performed, and these are so-called interrelated FSI analysis. In Maple software, 1D simulations of fluid flow in the tube were performed for various thin-walled and thick-walled variants. The aim is using these programs to determine the flow rates and pressures in the tube, its wall deformation and stress. Therefore, the theoretical part deals mainly with basic equations of flow dynamics, linear and nonlinear models and rotationally symmetric vessels. In the computational part are described individual procedures in the mentioned programs.
|
|
| |
|
|
Dynamic analysis of structure loaded seismic loads
Šulerová, Zdeňka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
This thesis deals with the calculation of response of reinforced concrete construction on the effect of seismic tension. Time and spectral analysis were made. They are mentioned as possible ways of calculation in EN 1998 - 1:2004 norm. Final figures of global deformations and stress on selected beam from the time and spectral analysis were firstly compared for the horizontal components of seismic stress affecting only in one direction. Subsequently comparison of time progress to combination of these effects mentioned in relevant norm was made. In the conclusion the results of used analysis are appraised.
|
guest ::
