|
|
Protection of prints by varnishing
Lokotschová, Radka ; Dzik, Petr (referee) ; Veselý, Michal (advisor)
This bachelor thesis deals with the issue of basic inkjet printing principles. It describes the continual stream and the drop on demand technique. It also deals with the issue of paper media, which are used during the inkjet printing – supporting bases and receiving layers. The thesis includes a description of print degradation, which is caused by UV-VIS radiation, pollutants, humidity or by elevated temperature. It also deals with the basic characteristics of varnishing and lamination.
|
|
| |
|
|
Mesoporous and microstructured layers of titanium dioxide
Lepičová, Martina ; Ing. Viera Jančovičová,Ph.D. (referee) ; Veselý, Michal (advisor)
This bachelor thesis provides an overview of modern ways of titanium dioxide thin layer preparation including material printing and their principles. Preparation of tetrabutoxide sol as a precursor of titanium dioxide with diethanolamine and polyethylene glycol as templating agents and its delivery to glass substrate by material printing is described. This work is focused on characterization of prepared thin layers of titanium dioxide by optical microscopy and making of microphotography database of prepared samples.
|
|
| |
|
|
Photocatalytic activity of printed hybrid layers of titanium dioxide
Sýkorová, Kateřina ; Krystyník, Pavel (referee) ; Veselý, Michal (advisor)
The main aim of this thesis was to optimalise composition of the titanium dioxide with a silica binder deposited on a PET foil. Emphasis was put on achieving maximum possible adhesion and hardness of the layer and the effect on photocatalytic activity. For the evaluation of photocatalytic activity comparative experiments with prepared layers were performed. Benzoic acid, dimethyl sulfoxide and azo dye Acid Orange 7 were used as model pollutants. Photocatalytic activity was investigated using UV-VIS spectrophotometry, formal rate constants and degree of conversion were also determined. The study results can be used for removing water pollutants from the water solution.
|
|
|
Indoor Robot - Mechanical Construction and Power Electronics
Maťas, Marek ; Veselý, Miloš (referee) ; Žalud, Luděk (advisor)
The thesis is divided into several logical units. In the first part is described the topic of mobile robotics, construction, propulsion and control of mobile robots. Other parts are devoted to the design of robot’s mechanical structure, calculating the requirements for the proposed type of engines and drives. Finally, the control electronics for these engines is proposed, along with a program for microcomputer.
|
|
|
Photocatalytic activity of hybrid layers of titanium dioxide for water disinfection
Morávková, Eva ; Krystyník, Pavel (referee) ; Veselý, Michal (advisor)
This bachelor thesis deals with the preparation of thin layers based on nanoparticles of titanium dioxide and organosilica binder. The effect of the ratio of the two components on the properties of the formed immobilized layers is studied. Two different ratios between TiO2 and organosilica binder and two different types of commercially available oxides were used. The work focuses mainly on the formation of thin immobilized TiO2 layers and their properties. Their photocatalytic activity was determined by degradation of model pollutant in solution, as well as their mechanical hardness and layer adhesion were determined. All prepared layers were treated with muffle furnace annealing and UV-C curing. Samples that had undergone a complete treatment were subjected to individual tests. The model dye was Acid Orange 7. Photocatalytic activity was characterized by a formal 1st order rate constant, which was detected by UV/VIS spectrophotometry. Mechanical hardness and adhesion were determined using ISO standards.
|
|
| |
|
|
Inkjet prints ageing by ozone and light
Pasečná, Klára ; Jančovičová, Viera (referee) ; Veselý, Michal (advisor)
This thesis is focused on the effect of ozone on ink-jet prints. The knowledge about print technologies, materials for ink-jet printing, influence of environmental factors on the prints degradation and the methods of print lifetime estimation are discussed in the theoretical part of the thesis. Test-charts of 108 samples of C, M, Y primary colours and their overprints were prepared. I used two types of papers designed for ink-jet printing. These samples were exposed the effect of ozone in various concentrations to perform an accelerated aging experiment. Optical density values, La*b* coordinates, colour difference values were calculated from the measured spectral data. Changes of colours of the ink due to ozone exposure were determined and discussed. The validity of the reciprocal law due to ozone exposure was studied, too. The reciprocal behaviour was not confirmed for both types of the studied papers.
|
|
|
Local Navigation for Outdoor Robot
Skácel, Martin ; Veselý, Miloš (referee) ; Žalud, Luděk (advisor)
This diploma thesis deals with complete designing and implementation of local navigation of a robot which travels according to set GPS. This work contains a study of contemporary used principles of the sensors which can be used as the components of the robot. There are sensors for measuring the surroundings of the robot and orientation of the robot in the environs. The equipment includes an instructing control unit with the ATmega8 microcontroller. This equipment collects data from the sensors and transfers them to the other systems of the robot. The following part of the thesis deals with the draft of the buses and communication protocols, which are necessary for connection between the sensors and the control unit. The I2C and RS232 buses were chosen as the most suitable. The communication protocol was borrowed from the semester project written by Bc. Michal Sitta. The main task of this control unit is reading out the data which have been measured from connected sensors. The realization of interface between the sensor bus and the major system is another core goal of the control unit. The system for a local navigation is designed with the approach which allows the widest range of extensibility. During the designing of the control unit the future possibility of insertion other sensors was taken into consideration.
|
guest ::
RSS feed.