|
|
Intersection of highway I/42 and path along Svitava (river)
Dušek, Martin ; Novák, Martin (referee) ; Všetečka, Martin (advisor)
The bachelor thesis project deals with the problematic part of bycicle path along Svitava river, around the crossing with Hladíkova street. A safe pedestrian crossing for a path frequented by cyclists, skaters and pedestrians is missing, which results in unsafe crossings of busy four-lane road l/42. The bycicle path in the project is designed on the west side of the river under the road bridge to avoid any kind of contact between the cyclists/skaters/pedestrians with road l/42 and to ensure the fastest and safest possible transit of both cyclists and cars. Emphasis was put on the stability of construction in precipice, tolerance of the construction against water and effective longitudinal slope and length of path ratio, to ensure safe concurrent passage of both cyclists and pedestrians.
|
|
|
Electric guitar combo design
Obr, Viktor ; Šebesta, Jiří (referee) ; Dušek, Martin (advisor)
The text of this bachelor´s thesis describes designing a construction of electric guitar combo. The first part of the project deals with history of guitar amplifiers and theory of design of individual components. The second part includes actual designs of guitar effect units (fuzz and tremolo), correction preamplifier, power amplifier with integrated circuit TDA7293V, power supplies for all components and choice of speakers for guitar combo. All effect units and preamplifier are also simulated in PSpice. In the last part there are results of measurements of all components and the whole combo.
|
|
|
Single Purpose Machine for Latch Subassembly Assembly
Dušek, Martin ; Tůma, Zdeněk (referee) ; Knoflíček, Radek (advisor)
This bachelor’s thesis deals with design of single purpose machine for car latch subassembly assembly. Research part describes issue of production of car locks with the introduction of single purpose machines and their main components. The practical part is accompanied by the design of automated station assembling a torsion spring into a plastic molding.
|
|
|
Bluetooth Vibrating Ringer
Dočekal, David ; Dušek, Martin (referee) ; Povalač, Aleš (advisor)
This thesis is focused on the implementation of Bluetooth communication between a mobile phone and an external device. The first chapter focuses on Bluetooth technology in general. It describes the interface, device classes according to RF power, Bluetooth versions, security and pairing options. The second chapter of the Bachelor’s thesis deals with the Bluetooth module called HC-05. It describes the basic features and practical, module usage. It also shows the concept of the Bluetooth unit and describes the adjusting of certain parameters of the HC-05 module using the AT commands. The third chapter summarizes the deign and implementation of the device. Software and firmware development is overviewed in the fourth chapter. The testing and measurement results of the complete device are presented in the last part of this thesis.
|
|
|
Control unit of aircraft engine - development HW and motherboard
Dušek, Martin ; Dolák, Petr (referee) ; Klusáček, Stanislav (advisor)
This bachelor's thesis describes development proccess of aircraft (BLDC) motor control unit. Possible methods of sensorless control are proposed, introduced and compared. The most suitable one is used to control the motor. The development process itself explains selection of components used in the circuit of the unit, theirs important parameters and the purpose of using it in the circuit. Created control unit is tested for its ability to control the motor and for a power capability.
|
|
|
Design and making of low-frequency power amplifier in class AB
Dušek, Martin ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
In this bachelor thesis I am occupied with low frequency amplifiers, theirs important parameters, classes and with integrations end-level. Next I am occupied with miscellaneous types of preamplifiers and additional circuits. There are simulated schemes of corrective preamplifier, protections scheme and high power amplifier in PSpice software in this thesis. These schemes and next additional modules are connected with DPS. This thesis contains result of measurement and photo functional sample.
|
|
|
Development of local roads in Přibyslavice
Dušek, Martin ; Halodová, Klára (referee) ; Všetečka, Martin (advisor)
The aim of the diploma thesis is to help the town of Přibyslavice with the development of local communications. This includes project work based on the current needs of the town and related consultations with local representatives and building authority. First, a passportization of local communications was drawn and subsequently, widening of the communication network by three new roads was suggested. This will enable creation of new building plots. New sewage and rainwater drainage, together with water conduit, were designed. Emphasis was put on avoiding interference with plots not owned by the town, on comfortable access to currently used plots, safe connection to the existing regional road no. III/3798, and sufficient radius for passage of firefighters and a garbage truck.
|
|
|
Pulse Generator for GPR
Martínek, Luděk ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This thesis deals with the question of ground penetrating radar. At first it considers the electromagnetic field and its mathematical description. Then it covers measurement of electromagnetic pulses and their processing of sub-surface ground penetrating radar. . In this thesis is also described the involvement of pulse generator with several transistors operating in avalanche breakdown. Individual transistors are compared in time domain. The received waveform is then selected the best transistor for the final generator. Then is proposed solution for the final pulse generator and its implementation. For impulsive generator is also designed and constructed increasing the DC-DC voltage converter. Finally, it is necessary to measure the time behavior of the output pulse generator.
|
|
|
Laboraty Pulse Power Supply Using Output Linear Stabilization
Lednický, Marek ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This thesis deals with switched mode power supplies. The theoretic part of the thesis consists of historical development and the elementary schemes of switched mode power supplies. It also includes the comparing with linear regulators. Next, it contains the description of individuals parts switched mode power supplies as a rectifiers, power supplies and stabilizers. There is a proposal and fixing of laboratory pulse power supply using output linear stabilization in the practical part of the paper.
|
|
|
Precision Ranging Using Ultrasound Waves
Hlaváč, Štěpán ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This project describes solutions of the precision rating using ultrasound waves with range measurement distance to 20 cm. It informs about basic properties of ultrasonic waves and its distribution in the environment. Selects the most appropriate methods for implementing distance meter. The document includes a proposal for block design and functional solutions to individual blocks of the device. This paper contains informations which was measured in the laboratory. The selected part of the design is simulated in PSpice program. It describes the implementation process and the precision of measurement.
|
guest ::
RSS feed.