|
|
Design and fabrication of the multimeter
Daněk, Martin ; Levek, Vladimír (referee) ; Háze, Jiří (advisor)
The goal of this thesis is to design and build a multimeter. Firstly, multimeters, their history and basic parameters are described, followed by an analysis of existing solutions with a similar topic. Next, theory of measurement of basic electrical quantities is described and the first prototype is proposed. Finally, the first prototype is evaluated, necessary adjustments applied, and the final prototype is proposed and evaluated.
|
|
|
Design and fabrication of USB oscilloscope
Daněk, Martin ; Levek, Vladimír (referee) ; Háze, Jiří (advisor)
The goal of the bachelor’s thesis is to develop and fabricate a simple two channel oscilloscope. A basic theory and construction of oscilloscopes is described first and their most important parameters discussed. Next, a couple of existing projects are analyzed, and the advantages and disadvantages of their construction are evaluated. Then a block and complete electronic scheme are presented and component choice is discussed. Finally, the product of this thesis is measured and the achieved parameters are evaluated.
|
|
|
Receivables Management in Corporation
Branná, Kateřina ; Daněk, Martin (referee) ; Pěta, Jan (advisor)
The bachelor's thesis is focused on the analysis of receivables management in a selected business corporation. The main focus here is on the issue of overdue receivables. Based on the results of selected indicators of financial analysis and analysis of receivables in the company, measures and modified procedures are proposed, which should eliminate the number of overdue receivables and should also improve the management of receivables itself.
|
|
|
Design and fabrication of the multimeter
Daněk, Martin ; Levek, Vladimír (referee) ; Háze, Jiří (advisor)
The goal of this thesis is to design and build a multimeter. Firstly, multimeters, their history and basic parameters are described, followed by an analysis of existing solutions with a similar topic. Next, theory of measurement of basic electrical quantities is described and the first prototype is proposed. Finally, the first prototype is evaluated, necessary adjustments applied, and the final prototype is proposed and evaluated.
|
|
|
Design And Development Of A Digital Multimeter
Daněk, Martin
The goal of this project is to develop a fully usable digital multimeter capable of measuring voltage, current, power, resistance, capacity, continuity and frequency. The multimeter should also have autoranging, RMS measurement and computer connectivity. The price of the final product in parts should be below 20 USD.
|
|
|
Receivables Management in Corporation
Branná, Kateřina ; Daněk, Martin (referee) ; Pěta, Jan (advisor)
The bachelor's thesis is focused on the analysis of receivables management in a selected business corporation. The main focus here is on the issue of overdue receivables. Based on the results of selected indicators of financial analysis and analysis of receivables in the company, measures and modified procedures are proposed, which should eliminate the number of overdue receivables and should also improve the management of receivables itself.
|
|
|
Performance of work outside the employer's workplace
Daněk, Martin ; Pichrt, Jan (advisor) ; Tomšej, Jakub (referee)
1 Performance of work outside the employer's workplace Abstract The goal of this diploma thesis is to critically assess the current legislation regulating performance of work outside the employer's workplace contained in the paragraph 317 of the Labour code and to describe historical roots of this institute. Further this diploma thesis aims to describe eventual shortcomings of the current legislation and to propose some legislative changes. This diploma thesis is divided into 9 chapters including the introduction. In the first and second chapter there is an introduction of the problematics of the performance of work outside the employer's workplace and definition of the basic concepts, specifically homeworking and teleworking. In the third chapter there is a description of historical roots of the performance of work outside the employer's workplace in the era of the First republic, Protectorate of Bohemia and Moravia and socialism. The core of this diploma thesis is in the fourth, fifth and sixth chapter, where there is a description of conditions, under which it is possible to perform work outside the employer's workplace and different working conditions, which these employees have. In the sixth chapter there is a description of practical problems, which the performance of work outside the employer's...
|
|
|
Design and fabrication of USB oscilloscope
Daněk, Martin ; Levek, Vladimír (referee) ; Háze, Jiří (advisor)
The goal of the bachelor’s thesis is to develop and fabricate a simple two channel oscilloscope. A basic theory and construction of oscilloscopes is described first and their most important parameters discussed. Next, a couple of existing projects are analyzed, and the advantages and disadvantages of their construction are evaluated. Then a block and complete electronic scheme are presented and component choice is discussed. Finally, the product of this thesis is measured and the achieved parameters are evaluated.
|
|
|
Návrh vzorové konstrukce a složení plnícího substrátu pro bio-technické stavební konstrukce pro ozelenění staveb
Daněk, Martin
The thesis is focused on biotechnical building structures that are used for greening buildings. The first part contains a review of literature, together with a list of authors, who was dealing with biotechnical engineering structures namely focusing on growing roofs -- their basic division, the use of vegetation layers, substrate composition, chemical and physical properties of the substrate and the substrate thickness for the individual vegetation. Another section is devoted to metodology, which deals with research models of green roofs and gabions. For models vegetative roofs is detailed way in which progressed in their realization. In this methodology are drawings created in AutoCAD and their detailed description of the individual parts. Further there are elaborated visualization of vegetation condition and created a frame structure in ArchiCad. The methodology described a procedure for greening gabions using created pockets of a bag filled with substrate. Again, the visualizations as wire baskets, and a bag filled pockets substrate together with the introduced plants. The conclusion is focused on the evaluation of the state of vegetation roofs and gabions.
|
|
| |
guest ::
RSS feed.