|
Methodology of highly reliable systems design
Straka, Martin ; Gramatová, Elena (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
|
Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.
|
|
Consumption of fiber in old age
ŠÁLEK, Jan
The theme of this bachelor thesis is the Consumption of fiber in the old age (seniors). Formerly, the dietary fiber was considered unnecessarily burdensome for human organism. Later, it was found that it has a relatively large impact on human health, especially by serving as a prebiotic for symbiotic bacteria inhabiting the gastrointestinal tract. There is still prevailing opinion that roughage divides into a soluble and insoluble, despite that some types of fiber cannot be definitely classified and placed into any of these groups because they have characteristics of both of them. The daily recommended dose is 30 g. The qualitative research was used for elaboration of the practical part. The first goal was to find out how much fiber seniors consume. The second aim was to compare the consumption of fiber among elderly people living alone and the elderly living in retirement homes built for them. The research group, at the first research question, consists of 20 seniors from the Southern Region aged over 65 years. The research group, at the second research question, consists of five retirement homes from the whole Czech Republic. All respondents were given a record sheet for one week, and instructions on how to fill it. Acquired menus were subsequently re-calculated through the program "Nutriservis Professional". The results show higher consumption of fiber than the average in the Czech Republic, but there is still almost a half missing to get the recommended daily dose. There was observed BMI and its impact on the consumption of fiber. No significant effect was found, because overweight had all interviewees except one respondent. The financial limit is visible for evaluated diet of homes for the elderly, therefore, there are no whole grain products, vegetables and almost no fruit. Despite these limitations, the average consumption of fiber is almost equal to elderly people living alone. In conclusion, there is a proposition how to, despite the low funds, increase the intake of roughage, and avoid or, at least, reduce the problems associated with its low consumption. Recommendations for respondents are individual and given under each evaluation.
|
|
Strategie oplozování u ryb s vnějším oplozením
SIDDIQUE, Mohammad Abdul Momin
Morphological properties, species specific differences, development, and function of egg envelopes are of importance for a better understanding of fertilization strategies as well as for captive reproduction. We reviewed morphology and the developmental stages of egg envelopes, mechanism of polyspermy block, and also the role of micropyle and cortical granules in polyspermy block for acipenserid eggs. The structure of the egg envelope is similar among the acipenserids, comprising an external envelope (thecal cells, basal lamina, and follicular epithelium), a five-layered oocyte envelope (adhesive layer, alveolar layer, epilayer, and zona radiata externa and interna) and a layer of oocyte matrix and cortical granules. The development of acipenserid egg envelope within the ovary comprises five stages, with further changes following fertilization. Moreover, we standardized the terminology used to describe the egg membranes which can minimize the confusions and be helpful for future work on acipenserids eggs as well as for other fish species. The sperm to egg ratio (required to fertilize eggs) and effects of pre-incubation of eggs in freshwater before fertilization were studied to standardized fertilization protocols for sterlet Acipenser ruthenus. Pre-incubation time had no effect on fertilization success at 430,000:1 and 43,000:1 sperm to egg ratios, while it was significant at the 4300:1 and 430:1 ratios. The use of adequate experimental suboptimal sperm to egg ratio revealed a positive effect of pre-incubation time, such that at the 430:1 ratio, 0.5 min pre-incubation increased the fertilization rate than 10 min. Transmission electron microscopy showed that pre-incubation of eggs in water for <10 min did not trigger a cortical reaction, suggesting that a low sperm to egg ratio 0.5 to 1 min pre-incubation of eggs in freshwater prior to fertilization can enhance fertilization rate of sterlet (minimally do not change fertilization). The effects of pre-incubation in seawater and the duration of egg receptivity were determined for fresh and over-ripe sea bass eggs. Our results revealed a significant effect of pre-incubation time for both the fresh (P < 0.01) and over-ripe eggs (P < 0.01). The fresh eggs had a higher fertilization success than over-ripe eggs. Fertilization success of eggs significantly declined for both of these treatments after 3 min of pre-incubation clearly indicated that sea bass eggs are able to be fertilized by sperm for up to 3 min after release into seawater. Effects of pre-incubation of eggs and activation medium on the percentage of eyed embryos for Ide Leuciscus idus were examined. At the eyed-egg stage, pre-incubation time was significant for the freshwater activation medium (P < 0.001), such that the percentage of eyed embryos declined across the pre-incubation time gradient. Activating medium had a significant effect on the percentage of eyed embryos for each pre-incubation time (P < 0.05). More precisely, freshwater produced the lowest percentage of eyed embryos at all pre-incubation times, whereas saline water and Woynarovich solution produced the highest percentage of eyed embryos at 0 s and 30 s before incubation. Examination of sperm traits showed no impact of activating medium on computer assisted sperm analysis parameters. Our results suggested that saline water or Woynarovich solution improve fertilization rate in Ide during fertilization. In conclusion, this thesis provides basic knowledge on gamete biology, role of egg receptivity period, effects of pre-incubation of eggs and different activating medium which can be useful to understand the fertilization strategies of different externally fertilizing fishes as well as standardize their fertilization protocol for captive reproduction.
|
|
Comparison of HPLC a GC-MS method for pesticide determination in soil
Chalbia Václavíková, Alena ; Kočárek, Martin (advisor) ; Havlík, Jaroslav (referee)
Physical and chemical properties of pesticides may vary significantly. Pesticides can be acidic, neutral or alkaline. Some compounds containing phosphorus, other sulfur, nitrogen or halogens. These atoms can be important for the detection of pesticides. Some of the compounds are volatile, others on the contrary not evaporate, which is also one of the important properties for chromatography. The diversity of pesticides actually makes it impossible to create a universal method, which is very impractical in terms of quality and time determination. Because that pesticides are one of the most chemicals in most countries. In the food and drinking water are limits on pesticides in order to avoid negative impact on public health. For residues in soil or surface water limits are set. (Lutz et al., 2006)
The objective of this thesis is to evaluate the possibility of using two types of chromatographs with different detectors for the analysis of pesticide. Pendimethalin which was chosen for this work, will be analyzed usinga liquid chromatograph with UV detektor and gas chromatography with mass detector. Both this method will be compared as well two extraction methods (Soxhlet extraction and shaking), and two extraction agents (methanol and acetonitrile).
Another point of the work is to provethe hypothesis that, for the determination of pendimethalin in soil is by gas chromatography using a mass spectrometer in comparison with the high performance liquid chromatography time and more expensive, but will achieve a higher yield and a lower detection limit of the pesticide.
|
|
The use of (nano)oxides for metal and metalloid stabilization in contaminated soils
Michálková, Zuzana ; Komárek, Michael (advisor) ; Luke, Luke (referee)
The main objective of the thesis was to evaluate the potential of selected Mn and Fe (nano)oxides for the stabilization of metals and metalloids in contaminated soils. The research was focused basically on three materials - commercial nanomaghemite (Fe III), nanomagnetite (Fe II,III) and a synthetic amorphous Mn oxide (AMO). The main aim of the work was to provide a complex view on the chosen stabilizing amendments regarding not just their direct influence on contaminants mobility and stabilization mechanisms, but also their stability and alterations in soil conditions together with influence on soil microorganisms and higher plants. Firstly, adsorption properties of the tested materials towards Cd, Cu, Pb and As were investigated. In this context, the most effective material showed to be the AMO reaching one to two orders of magnitude higher adsorption capacities than Fe III and Fe II,III under given experimental conditions. Interestingly, the rate of As(V) adsorption onto AMO was increasing with increasing pH as a result of high pHzpc of the AMO (8.1) and significant dissolution of this phase at lower pH values. As a next step, the influence of (nano)oxides on metal(loid)s mobility and other physico-chemical soil characteristics after application to contaminated soil was examined. Again, the AMO proved to be the most efficient in reducing mobile pools of Cd, Cu, Pb, Zn and As. On the other hand, Fe III and Fe II,III addition had generally less significant effects on contaminants mobility. AMO application further resulted in an increase of soil pH connected with AMO dissolution and unwanted decomposition of soil organic matter. When (nano)oxides alterations in soil conditions were observed, MnCO3 coatings were identified on AMO surface while no significant changes were recorded for Fe III and Fe II,III. As the MnCO3 formation was connected with increased AMO stability, AMO particles synthetically covered with MnCO3 coating (denoted as SM AMO) were prepared. Although the SM-AMO had a lower mass loss in soil than pure AMO, the stabilizing efficiency was almost the same for both materials. The differences in surface composition of both materials were decreasing with time as MnCO3 naturally precipitated on the AMO surface in soils while the SM AMO coating was gradually dissolving. When investigating the effect on soil microbiota, AMO efficiently promoted soil microbial activity while no significant changes were observed in the case of Fe III and Fe II,III. The AMO was also able to reduce the uptake of Cd, Pb and Zn by sunflower (Helianthus annuus L.), eliminate Zn phytotoxicity symptoms and increase biomass yield. On the other hand, toxic levels of Mn released from the AMO in an acidic soil were found in sunflower tissues. AMO application is thus recommended for contaminated neutral or slightly alkaline pH with a higher cation exchange capacity in order to avoid unwanted release of Mn. Finally, various types of AMO-biochar composite sorbents were recently prepared and field experiment focused on stabilization of Cd, Pb, Zn and As using studied materials is currently under preparation. The combined results from the thesis highlight the importance of a complex experimental approach dealing with all parts of the contaminated soil environment in order to obtain complete information about the efficiency and usefulness of any newly developed stabilizing amendment.
|
| |
|
Management of production populations of forest tree species utilizing methods of mathematical programing
Hořejší, Matouš ; Lstibůrek, Milan (advisor) ; Stejskal, Jan (referee)
Breeding of forest tree species is a great opportunity for the entire forestry sector to succeed in the present modern World. Genetically improved forest trees have much better growing quality and they can sustain higher stress and unfavorable climatic conditions.
Efficient algorithms are necessary for optimizing and establishing seed orchards. These should optimally select clones as parents in future seed orchards. In the present thesis, we developed model, based on mathematical programming methods, which creates mix of clones with the maximum breeding value and constraints on genetic diversity.
|
|
Comparison of production and conditions of use of liquid biofuels in different countries
Semerák, Adam ; Pecen, Josef (advisor) ; Krepl, Vladimír (referee)
Biofuels production has experienced rapid growth in recent years. Many countries initiated legislative measures to promote their development, production and use in the transport sector. However, there are also growing concerns about the economic, environmental and social sustainability of biofuels, as well as their ability to truly meet the expectations of energy security.
This paper attempted to point out the complexity and diversity of the production and use of liquid biofuels in the transport sector while using available information resources. More specifically, bioethanol and biodiesel which are most commonly used biofuels. Furthermore, he also tried to point out the diversity of characteristics and impacts in production and use of liquid biofuels, as well as the importance of consideration of the specific local conditions. That was examined from four perspectives of sustainability: technological, economical, socioinstitutional, and environmental. To illustrate the diversity and interdependence of the impacts of this whole issue two countries with very different human development indexes were selected. The Malaysia and India.
At the basis of this paper the author concluded that for successful and sustainable production of liquid biofuels there must be taken into account all the factors examined equally. He also emphasized the importance of further research of this renewable energy source in terms of ensuring future energy security.
|
guest ::
