|
Zahraniční investice v ČR a jejich vývoj v letech 1991 - 2006
Jíchová, Ivana ; Ježek, Tomáš (advisor) ; Paneš, Patrik (referee)
Práce vymezuje problematiku zahraničních investic v České republice a to od počátku 90. let a až do roku 2006. V teoretické části se velmi důkladně zabývám faktory, které působí na investorovo rozhodování o umístění investice v zahraničí. Mezi těmito faktory výrazně vyčnívají investiční pobídky, proto jsou v dalších kapitolách rozebrány velmi podrobně. Poté analyzuji systém investičních pobídek v České republice, v Polsku, Slovensku a Maďarsku. V hlavní části analyzuji příliv zahraničních investic do České republiky.
|
|
Strategic Trade Policy in Defence and Security Industry
Neumannová, Pavla ; Žamberský, Pavel (advisor) ; Jiránková, Martina (referee)
The master thesis is devoted to a nontraditional, however, in the todays world to a very current topic, arms industry and its support. The thesis connects the theoretical concept of the strategic trade policy (defined by P. Krugman or J. Brander) to its practical interpretation and application in the defence and security industry. The first chapter explains the strategic trade policy using the Brander Spencer analysis. The topic of the second chapter is strategic industries and this chapter answers the question whether the defence and security industry is a strategic industry or not. The third chapter analyses the possibilities of the support of DSI and compares approaches of different EU member states. The last chapter is devoted to the solution of this problem. The main contribution of this thesis is a new interpretation of the strategic trade policy, analysis of the importance of the defence and security industry and its support and suggestion of practical measures for Czech companies and for the Czech Ministry of Defence.
|
|
Comparison of methods of ECLIA and ELISA in determining the beta-CrossLaps
KOŽANTOVÁ, Jana
Osteoporosis is a very old disease affecting a large majority of population. Its occurrence rate has been growing permanently. It is a systemic disease of bones for which the decrease in bone mass, i.e. of inorganic as well as organic bone part is characteristic. Typical symptoms are osteoporotic fractures. To perform an in time diagnostics of the disease, it is necessary to execute the necessary examinations. One of them is also the laboratory determination of markers of bone resorption and new creation for finding out the state of bone metabolism. The target of my bachelor thesis was to find out the level of the bone resorption marker (beta-CrossLaps) by means of ELISA and ECLIA methods on the same serum from patients with the diagnosed osteoporosis and to process statistically the results. In the next part I dealt with the structure and functions of bones. Then I focused on markers of bone formation and resorption. Finally I mentioned the bone metabolism and its control mechanisms. I concentrated mainly on the metabolism of calcium, D vitamin, parathormone and calcitonin. I carried out the practical part of my bachelor's thesis in the accredited private laboratory STAFILA, spol. s r. o. in České Budějovice. The procedure of my work followed the standard operating procedure of the laboratory. In the research, in total 66 serums of patients with osteoporosis were analysed by me. At first, I determined the concentration by beta-CrossLaps method based on the principle of sandwich ELISA on the appliance NexGen Four from TestLine company. Then I analysed the same samples on the automatic analyser IDS-iSYS from IDS company, this time by ECLIA method. Both appliances on which the determination was executed, principles of both methods, applied analytic sets and the procedures of analysis are described in the methodical part. In the next part of my bachelor's thesis, the results of my measuring are stated. At first I entered the concentrations beta-CrossLaps in ng/ml measured by both methods into the table and for the respective samples I stated the sex and years of birth of individual patients. Moreover I prepared a graph illustrating the share of men and women of various age categories in my research. The second graph shows the differences in values of beta-CrossLaps concentrations between both methods. Resulting concentrations were subject to regression analysis. I applied linear regression and Grubbs test for finding out the outlying values excluded from the further statistical processing. I performed Passing-Bablok regression based on the remaining values. As a result of regression equation and 95% CI of the slope B and intercept A, the proportional error of measuring was rejected but on the contrary, the systematic error was confirmed. Correlation coefficient R = 0,97 shows a very good linear dependency between both methods. It turned out by practice in the laboratory that the evaluation of concentrations beta-CrossLaps from the same patients on various appliances may show partially different values. I worked at two different analysers, each of them was based on another principle, with a different sensitivity and calibration. All of this could have the influence on the resulting concentration of individual samples. The advantage of automatic analyser IDS-iSYS is a quicker determination. Moreover it is possible to perform on this apparatus all the possible examination concerning the bone metabolism from D vitamin, parathormone, osteocalcin up to bone markers. It is advantage for the patients with osteoporosis as well as with other metabolic skeleton diseases. It follows from this that all the necessary examinations may be carried out on one apparatus.
|
|
Spain as a tourist destination
Zbořilová, Kristýna ; Abrhám, Josef (advisor) ; Havlíčková, Blanka (referee)
This Bachelor's Thesis deals with tourism in Spain. The topic is quite broad so the main aim of the thesis is to evaluate tourism in two significantly different regions - Andalusia and Basque Country. The first chapter defines terms related to tourism that are essential to coherently understand this thesis. For example, this part defines the term tourism and its typology. The second chapter focuses on tourism in all of Spain. In particular, Spain is described in terms of history and how tourism is evaluated. In addition, Spain's most attractive places are presented. The second to last, and final chapter are similar in structure in order to perform a comparison of the chapters. The first part of both chapters describes the regions. Then, tourism is evaluated by using statistics from incoming tourists. Finally, SWOT analysis is used to comprehensively evaluate the previously mentioned information.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Image analysis in tribodiagnostics
Machalík, Stanislav ; Stodola,, Jiří (referee) ; Tillová,, Eva (referee) ; Zemčík, Pavel (advisor)
Image analysis of wear particles is a suitable support tool for detail analysis of engine, gear, hydraulic and industrial oils. It allows to obtain information not only of basic parameters of abrasion particles but also data that would be very difficult to obtain using classical ways of evaluation. Based on the analysis of morphological or image characteristics of particles, the progress of wearing the machine parts out can be followed and, as a result, possible breakdown of the engine can be prevented or the optimum period for changing the oil can be determined. The aim of this paper is to explore the possibilities of using the image analysis combined with the method of analytical ferrography and suggest a tool for automated particle classification. Current methods of wear particle analysis are derived from the evaluation that does not offer an exact idea of processes that take place between the friction surfaces in the engine system. The work is based upon the method of analytical ferrography which allows to evaluate the state of the machine. The benefit of use of classifiers defined in this wirk is the possibility of automated evaluation of analytical ferrography outputs; the use of them eliminates the crucial disadvantage of ferrographical analysis which is its dependence on the subjective evaluation done by the expert who performs the analysis. Classifiers are defined as a result of using the methods of machine learning. Based on an extensive database of particles that was created in the first part of the work, the classifiers were trained as a result, they make the evaluation of ferrographically separated abrasion particles from oils taken from lubricated systems possible. In the next stage, experiments were carried out and optimum classifier settings were determined based on the results of the experiments.
|
|
Optimization of network flow monitoring
Žádník, Martin ; Lhotka,, Ladislav (referee) ; Matoušek, Radomil (referee) ; Sekanina, Lukáš (advisor)
The thesis deals with optimization of network flow monitoring. Flow-based network traffic processing, that is, processing packets based on some state information associated to the flows which the packets belong to, is a key enabler for a variety of network services and applications. The number of simultaneous flows increases with the growing number of new services and applications. It has become a challenge to keep a state per each flow in a network device processing high speed traffic. A flow table, a structure with flow states, must be stored in a memory hierarchy. The memory closest to the processing is known as a flow cache. Flow cache management plays an important role in terms of its effective utilization, which affects the performance of the whole system. This thesis focuses on an automated design of cache replacement policy optimized to a deployment on particular networks. A genetic algorithm is proposed to automate this process. The genetic algorithm generates and evaluates evolved replacement policies by a simulation on obtained traffic traces. The proposed algorithm is evaluated by designing replacement policies for two variations of the cache management problem. The first variation is an evolution of the replacement policy with an overall low number of state evictions from the flow cache. The second variation represents an evolution of the replacement policy with a low number of evictions belonging to large flows only. Optimized replacement policies for both variations are found while experimenting with various encoding of the replacement policy and genetic operators. The newly evolved replacement policies achieve better results than other tested policies. The evolved replacement policy lowers the overall amount of evictions by ten percent in comparison with the best compared policy. The evolved replacement policy focusing on large flows lowers the amount of their evictions two times. Moreover, no eviction occurs for most of the large flows (over 90%). The evolved replacement policy offers better resilience against flooding the flow cache with large amount of short flows which are typical side effects of scanning or distributed denial of service activities. An extension of the replacement policy is also proposed. The extension complements the replacement policy with an additional information extracted from packet headers. The results show further decrease in the number of evictions when the extension is used.
|
|
Effective using of potential of bilingual environment
HOVORKOVÁ, Eva
The dissertation thesis "How to use the potential of bilingual environment efficiently" endeavors to highlight bad as well as good practices in bilingual upbringing. Bilingualism represents at present a very topical issue. In connection with increasing globalization, the issue of learning of foreign languages is more and more emphasised. People living in mixed marriages have often no idea how to bring their children up. In many cases they take steps that lead to irreversible consequences. The theoretical part of the thesis gives a survey of bilingualism, the division and kinds of bilingualism and ways of its acquisiton. The theory is practically illustrated in the empirical part through various examples. 42 case studies have been carried out, which include characteristic and uncharacteristic respondents. The findings of the research are compared with the facts mentioned in the reference works. The aim of the dissertation thesis is to find out which educational methods should parents follow in bilingual education and which methods they should better avoid.
|
|
Výsledky účtu kultury ČR za rok 2012
Český statistický úřad
Účet kultury ČR byl poprvé zpracován v ověřovacím provedení za referenční rok 2009. V průběhu sestavování účtu i v rámci hodnocení jeho výsledků za tento rok a za léta následující se ukázalo, že některé předpoklady a záměry obsažené v původním metodickém manuálu k účtu nemohou být zcela naplněny, resp. musí být poopraveny. Srovnávání výsledků účtů kultury v časové řadě je prozatím velmi problematické.
Fulltext:  PDF
|
|
Faktory ovlivňující poptávku po osobních automobilech v ČR
ČURILLOVÁ, Michaela
The bachelor thesis investigates factors which influence the demand for passenger cars in the Czech Republic. The theoretical part of this work is focused on basic terms and determinants which are important for the demand. Further it describes particular statistical methods, which are used for the analysis. The practical part contains the introduction to the automotive industry and the description of specific attributes of the demand for passenger cars. This part analyses factors which may have an effect on the demand for passenger cars in the Czech Republic. The main factors and the dependence are explained by applying econometric methods. Analyzing reveals these important factors: number of registrations of passenger cars, consumer prices of new and used passenger cars, consumer prices of fuel, population and income.The conclusion contains the summary of impacts on the specific demand.
|
guest ::
