National Repository of Grey Literature 412 records found  1 - 10nextend  jump to record: Search took 0.03 seconds. 

Physiotherapy after total hip joint replacement
ŠUHÁJKOVÁ, Pavla
Pain in a hip joint can dramatically affect the chance of having active life. The recent years have seen a significant progress in the results achieved while implanting artificial hip joints. This type of operation is simultaneously becoming increasingly more often especially when we take into consideration the increasing age of population. Implanting total hip joint replacement results in improving the quality of life, which can only be achieved through interdisciplinary collaboration of doctors, complex rehabilitation treatment, and positive approach of the subject alone. The aim of this bachelor?s thesis was to process case reports of patients after total hip joint replacements and to put together rehabilitation plans for these subjects. With the established objective in mind, the author summarizes outcomes dealing with the issues relating to total hip joint replacement, physiotherapy, occupational therapy, and spa treatment following such operation. The research part of the bachelor?s thesis was accomplished by qualitative research. Data were collected by observing, interviewing and analysing documents. The data were gathered by individual in-depth interview and using case reports, which included author?s own observations, a draft of rehabilitation plan and implementation of the therapy, and subsequent outcomes from the assessment of therapy. The research corpus comprised of two patients who underwent a planned total hip joint replacement because they had been suffering from advanced primary coxarthrosis. The research was carried out at an in-patient orthopaedic department of the Hospital Pelhřimov in March 2011, when the subjects were being hospitalised. Quality and appropriately managed rehabilitation allows quicker improvement in the patient?s health following the operation. It is used as a prevention of complications, it improves engagement of functional potential in the operated joint and it consolidates appropriate motion stereotypes. The outcomes of the research confirm that such pre-operational and post-operational rehabilitation carried out during the stay in hospital leads to a decrease or complete removal of pain, an increase in joint?s mobility and muscular power, getting used to walking on flat surfaces and up and down staircases, and the level of independency in everyday activities.




Lapped scarf joints for reconstruction of historical structures
Kunecký, Jiří ; Fajman, P. ; Hasníková, Hana ; Kuklík, P. ; Kloiber, Michal ; Sebera, V. ; Tippner, J.
This paper presents a description of the repair of timber structures using a prosthesis scarf\njoint designed for the replacement of damaged parts of beams. This new scarf joint makes use\nof the strutting effect of inclined contact faces where the forces are transmitted through\nwooden coupling elements - wooden dowels or keys. The scarf can be modified in four\nvariants according to the relevant stress and is suitable for historically valuable timber\nstructures. It meets both functional and aesthetic requirements. The designer - structural\nengineer will learn in the methods the load bearing capacity or stiffness of the beam with the\ndesigned joint, its recommended dimensions and detailed geometry. The contractor will\nappreciate the description of the execution and maintenance of the joint.

Machining technologies used in medicinal producing
Drábek, Tomáš ; Sedlák, Josef (referee) ; Kalivoda, Milan (advisor)
This bachelor‘s thesis is focused on the connection of machining technologies with medical production. The first part includes an overview of a few Czech companies that pursue production of joint replacements. There are also some examples of the joint replacements included in this part. Frequently used materials for implants and constructions of dental replacements are included in the following part. The next section contains a summary of machining technologies used in this area. Additionally, there are a few technological production processes of components of joint replacements which are mentioned in the first part. This part also outlines machining technologies used in constructions of dental replacement production. Also included is an evaluation of the possibilities of producing femoral components of a knee replacement, as well as points out the specificity of machining technologies used in stomatology. The ending section of the thesis contains an overview of machining machines, tools, and software used in these areas. Lastly, there is a final evaluation concluding the work as a whole.

Algorithm of imaging methods of injuries of the neck of the femur in the case of seniors
TOČÍKOVÁ, Miluše
The bachelor thesis deals with the incidence of femoral neck injury in the elderly. The work is divided into a theoretical and practical part. As the number of people of retirement age is growing, the rate of injuries associated with this age group has been increasing as well. It is necessary to accept the idea that age is a stage of human life, which every individual must eventually face. A femoral neck fracture is one of the causes of mortality and morbidity in the elderly. The incidence of this injury has been increasing both in developed countries and in the Czech Republic. A femoral neck fracture represents a threat for mobility and independence of seniors. Some people are then permanently dependent on mobility aids, while others remain in institutional care. The most common cause of femoral neck fractures in the elderly is a fall on their side, which is caused by a complex interaction of external and internal factors. The first imaging method used during a medical examination is sciagraphy, which is one of the oldest methods. It allows physicians to assess the preoperative condition of the hip joint and postoperative check-ups during the treatment by alloplasty or perioperative condition with the use of osteosynthesis. It is beneficial for the above-mentioned group of people to carefully assess the bone metabolism. A healthy bone is constantly reconstructed, it continuously breaks down and a new bone replaces it. With age, the degradation of bone prevails over bone formation and the bone begins to "thin". This disease is called osteoporosis. It is a disease that pertains to the civilisation diseases. It is often only diagnosed at an advanced stage, when it is already increasingly susceptible to fracture incidence. The factors of osteoporosis include an unhealthy lifestyle, hormonal changes in women after menopause, when there is a decrease in the level of calcium, a major weight loss etc. A painless, non-invasive method, by means of which a doctor can obtain comprehensive information about the amount of bone mineral in the examined part of the bone, is a densitometry test, or DXA. This test uses x-rays at two energy levels. The DXA method can be measured as a whole-body mineral content as well as any other part of the body. Other causes, which increase the risk of a femoral neck racture, are bone metastases. The proximal portion of the femur, including the femur neck, metastatically affects especially primary lung cancer, kidney cancer, thyroid, breasts in women and prostate in men. At an early stage, bone metastases are asymptomatic. Clinical symptoms such as pain can occur, when the metastatic process penetrates the periosteum and surroundings of the bone, thereby irritating the neural structures. Another symptom is the emergence of pathological fractures. Bone metastases are helping us uncover laboratory tests and diagnostic imaging methods, which include, for example, scintigraphy. Bone scintigraphy can detect a metastatic process much earlier than X-ray examination. The aim of the work was to describe the principles of individual imaging methods, which help doctors to determine the correct diagnosis, to learn more about the femoral neck injury in the elderly and about causes of their ocurence. Moreover, the two hypotheses were established: 1. The most frequently used method in case of a femoral neck injury is skiagraphic examination. 2. That is why more than a half of femoral neck injuries are diagnosed in the elderly. The practical part was elaborated on the basis of a quantitative research. The data needed for the research were obtained from case studies of patients hospitalized in the orthopedic department of the Hospital Tábor a.s., in the period from 1st April 2014 to 31st March 2015.

A Proposal for a Methodology of a Knee Joint Replacement Tibial Plate 3D Model Creation
Kutálek, Lukáš ; Sedlák, Josef (referee) ; Madaj, Martin (advisor)
This thesis describes the design methodology of the 3D model of the tibial plate. The paper briefly describes the anatomy of a knee joint, the current surgery operation process current tibial components and modeling procedure of the tibial plate for a specific pacient. A physical model was made by means of Rapid Prototyping.

Reliability analysis of the hip joint endoprosthesis ceramic head
Málek, Michal ; Janíček, Přemysl (referee) ; Fuis, Vladimír (advisor)
This diploma thesis deals with probability of fracture ceramic head of total hip endoprosthesis during tests by the standard ISO 7206-5. In the first part is made stress analysis with method of finite elements in program ANSYS. Six types of ceramic head with different geometry was analysed for ideal geometry of head and shaft, and also for shape imperfections from nominal conical shaft and head. The final values of principal stress from stress analysis were entry values for the second part – probability of fracture analysis. Weibull weakest-link theory was applied, namely 3-Parameter and 2-Parameter Weibull distribution.

Physiotherapy in patients with rupture LCA
Čížková, Karolína ; Hamarová, Zuzana (advisor) ; Horká, Bohumila (referee)
Author: Karolína Čížková Institution: Rehab clinic LF UK in Hradec Králové Topic of bachelor's thesis: Physiotherapy in patiens with rupture of ACL Supervisor: Mgr. Zuzana Hamarová Number of pages: 108 Number of annex: 11 Year of vindication 2012 Key words: ACL, knee, rupture of ACL, rehabilitation In general part of this bachelor's thesis is described anatomy, kinesiology and biomechanics of the knee joint, mostly anterior cruciate ligament. It contents causes of injury of anterior cruciate ligament, diagnostic methods and methods of treatment. In special part of this bachelor's thesis is dateiled casuistry of two patients, who have been rehabilitated after reconstructive surgery of ACL in army sports centre Dukla Liberec. Each of these two patients was operated by different method of reconstructive surgery of ACL and the goal of this bachelor's thesis is to compare the success of rehabilitation between these patients.