|
Soil organic material, its components and reasons, why it is essential to differentiate them.
KRÁTKÁ, Petra
We are learning about a soil organic material as a unit from diverse media or lay and specialist literature. This informations are not differing the parts and characteristic of the soil complex. There are also terminological discrepancies which lead to incorrect deduction about soil fertility, decrease of topsoil content and poor management. This is a reason, why I do a literary summary in my thesis about a soil organic material and an individial soil components. It is a essential to distinguish the soil components for their different quality and the different origin after transformation precess. My task was a term clarification in soil organic material segmentation. We can divide it in two major groups: primary soil organic material and stable topsoil. The primary soil organic material is decomposed in exothermic mineralization process and is a origin of a nutriants and an energy for the soil edafhon and plants. The topsoil is a stable organic material and its matters significantly affect fertility, nutrient content, structure, aerial, aquatic and thermic regime of the soil. Morover the topsoil matters has a highmolecular HK ability to the heavy metals absorbtion.
|
|
Renaissance furniture and interior in Central Europe
Fričová, Michaela ; Otavský, Karel (advisor) ; Fronek, Jiří (referee)
The aim of the bachelor's thesis about renaissance furniture and interior in Central Europe is the presentation of renaissance furniture-making and the culture of habitation in Central Europe in culturally historic continuities. In defines the specific principle of furniture creations demonstrated by concrete examples in the following catalogue part. The introduction to the probleme is presenting in the first chapter a summary of the preceding development of furniture art and the whole culture of habitation in Europe. In the second chapter there has been mapped the pervasive change, which the cultur of habitation hat gone trough in the territory of Central Europe during the 16th and the half of the 17th century describing the typological extension of used furniture. At the same time i tis concerning itself with the ideological origins and the historical conditions and the impact upon the whole appearance of the interior. The third chapter is briefly characterizing the production of furniture from the point of wiew of technology, the material structure, the construction and means of production. It is describing the mostly amplified used decoration tenique, and its inspirations. Besides these technical aspects i tis pursuing the economically social backgroud of the produktion of furniture in Central...
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
| |
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
| |
guest ::
