| |
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
HYDROGEN ABSORPTION IN A-Co30Fe55B15
Čermák, Jiří ; Král, Lubomír ; Roupcová, Pavla
Hydrogen solved in amorphous alloys (AAs) influences their magnetic characteristics. AAs are also perspective\nas additives that can improve hydrogen storage kinetic in certain types of ball-milled hydrogen storage\nmaterials (HSMs). Therefore, knowledge of hydrogen solubility and hydrogen sorption kinetics in AAs are of a\ngreat importance for aimed design both AAs with optimal magnetic parameters and HSMs with desired sorption\ncharacteristics. In the present paper, amorphous alloy Co30Fe55B15 (an example of the type a-TM1xTM2y Bz ;\nTM - transition metal) was investigated. Hydrogen concentration c H was measured by Sieverts method in\ntemperature interval from T = 150 °C to T = 350 °C under hydrogen pressure p up to 6 MPa. It was found that\nc H was an increasing function of p and its maximum value was typically 0.5 wt.% H2 at 350 °C and 6 MPa.\nHowever, when the alloy was preliminary hydrogen charged (PHC), the pressure dependence of total c Htot in\nthe first absorption cycle(s) is non-monotonous in dependence on PHC conditions. For the sake of comparison,\nthe same absorption characteristics were measured also in Mg2Ni intermetallic that is a common constituent\nin Mg-based HSMs. Comparing Co30Fe55B15 and Mg2Ni, it was concluded that Co30Fe55B15 shows lower\nhydrogen solubility, but much better absorption kinetics.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Past and present of education of paediatric nurses and their attitudes towards their own profession
ZMEŠKALOVÁ, Stanislava
This thesis deals with the history and present state of the education of paediatric nurses and their attitudes towards their own profession. The first objective was to find out information regarding the education in the nursing profession in Bohemia, with a focus on child care, and to create an overview of the education in the profession Paediatric Nurse. The second objective was to find out about the attitudes of paediatric nurses towards their profession. Interviewed were sisters who chose the profession after finishing elementary school and underwent qualifying studies as well as nurses who chose the profession after graduating from a secondary school or university education and achieved their education through specialization studies. The last objective was to compare these two groups and to assess whether there are any differences between them. The theoretical background of the thesis defined basic concepts such as the definition of education, education in nursing, a profession, and attitude towards a profession. Documents related to education since the foundation of nursing education to the present were also used and studied. The chapters on the status of nursing staff and its employment chances focus on the development of the relationship to the profession and shaping attitudes towards it. In the research part of the thesis, the collected information related to education and derived from archival documents, literature, laws and regulations is presented. The results can be used as a basis for creating educational material focused on the history of the field and intended for the education of paediatric nurses to strengthen their identification with the profession. The thesis also presents interviews with in-service paediatric nurses where they express their views on the work in the field and their attitudes towards their profession. The results of the interviews are documented and organized so that it is possible to assess whether there are any differences between these groups. The anticipated differences can be used for further investigation focused on attitudes to the profession. Verified knowledge could then be used for training paediatric nurses aimed at creating desired attitudes towards the profession.
|
|
Natural houses in gardens
Formánková, Kristýna ; Kunt, Miroslav (advisor)
Thesis discusses natural houses which are supposed to be part of our lives in the future. These houses may be for someone and they might prefer smarter building with non-recyclable materials when choosing a new housing. But it is necessary to think about our future and sustainable development. We also need to tell ourselves what is really a priority for our planet. There comes a time when they will prefer building materials which can be used somehow after some time or be recycled. This is related to the design of the garden. It is designed to fulfil an ornamental, economic and social function. The garden is an integral part of each house, therefore it is important for each element used to be creating the garden as a linked harmonious whole. The study deals with the concept of a natural houses home in accordance with the maximum use of the garden.
|
|
Zalužanský Brook Restoration Project
Lašek, Jakub ; Kalibová, Jana (advisor)
This thesis contains restoration project of chosen section of Zalužansky brook in Ústecký kraj. Project is processed at the level of documentation for territorial management according to decree no. 499/2006, of buildings documentation. Theoretical part captures professional literature research dedicated to restorations, spatial planning and buildings documentation. Analytic segment closely defines and characterise location of interest at first, although major part consists of designed restoration measures following requirements for creating a building documentation by mentioned decree. Benefit from this thesis is it's possible usage as a background material for documentation created by authorised engineer for water management and landscape planning.
|
|
Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (referee) ; Navrátil, Vladislav (referee) ; Grmela, Lubomír (advisor)
Poptávka ze strany vesmírného výzkumu, zdravotnictví a bezpečnostního průmyslu způsobila v posledních letech zvýšený zájem o vývoj materiálů pro detekci a zobrazování vysokoenergetického záření. CdTe a jeho slitina CdZnTe. jsou polovodiče umožnují detekci záření o energiích v rozsahu 10 keV až 500 keV. Šířka zakázaného pásma u CdTe / CdZnTe je 1.46 -1.6 eV, což umožňuje produkci krystalů o vysoké rezistivitě (10^10-10^11 cm), která je dostačující pro použití CdTe / CdZnTe při pokojové teplotě. V mé práci byly zkoumány detektory CdTe/CdZnTe v různých stádiích jejich poruchovosti. Byly použity velmi kvalitní spektroskopické detektory, materiál s nižší rezistivitou a výraznou polarizací, detektory s asymetrií elektrických parametrů kontaktů a teplotně degenerované vzorky. Z výsledků analýzy nízkofrekvenčního šumu je patrný obecný závěr, že zvýšená koncentrace defektů způsobí změnu povahy původně monotónního spektra typu 1/f na spektrum s výrazným vlivem generačně-rekombinačních procesů. Další výrazná vlastnost degenerovaných detektorů a detektorů nižší kvality je nárůst spektrální hustoty šumu typu 1/f se vzrůstajícím napájecím napětí se směrnicí výrazně vyšší než 2. Strukturální a chemické analýzy poukázaly, že teplotní generace detektorů způsobuje difuzi kovu použitého při kontaktování a stopových prvků hlouběji do objemu krystalu. Část mé práce je věnována modifikaci povrchu svazkem argonových iontů a jejímu vlivu na chemické složení a morfologii povrchu.
|
guest ::
