| |
| |
|
Comparison of chemical composition of throughfall and deposited precipitation
Chaloupecký, Pavel ; Špičková, Jitka ; Fišák, Jaroslav ; Skřivan, Petr
Since June 2004 throughfall samples in beech and spruce vegetation have been taken at the observatory Milesovka. Ever since 1998 fog water samples have been taken there as well. In this paper are compared the concentrations of main ions and trace elements in throughfall and in deposited precipitation. The concentrations of main ions and trace elements in throughfal are primarily affected by the volume of samples. The highest concentrations of monitored sustances in throughfall were recorded in September and in October when the lowest rainfall totals were measured. The concentrations of monitored sustances were in throughfall mostly higher in spruce vegetation in comparison with beech vegetation. It is probably due to the thicker treetop in spruce vegetation on Milesovka observatory. Due to the thicker treetop a smaller volume of throughfall is let fall and the substances from ambient air are captured more effectively in comparison with beech vegetation. In the case of main ions the lowest concentrations were measured in fog water samples. For trace elements wasn´t data. From comparison with reference locality Lesni potok is obvious that concentrations of monitored sustances in throughfall on Milesovka exceed sharply concentrations in locality Lesni potok. This difference is considerably higher by spruce vegetation in comparison to beech vegetation which indicate that it is necessary take not only local air quality into account but also type of vegetation and thick of treetop which can very significantly contribute to the chemical composition of throughfall.
|
|
Comparison of Business Intelligence implementation using open source solutions for middle size companies
Schmidt, Róbert ; Maryška, Miloš (advisor) ; Sládek, Pavel (referee)
The main goal of master thesis is to analyze and propose possible low cost Business Intelligence solution with open source technologies and comparison of available tools for implementation in middle size company. We compare Pentaho and Jaspersoft tools implemented on local hardware and cloud environment with Microsoft Azure services. The theoretical part focuses mainly on understanding the business intelligence and its architecture, because architecture is an important part of the work. Actual tools are designed as stand alone modules for specific activities in the business intelligence lifecycle. Low cost tools are often connected with open source technologies and cloud computing. This part of the work contains explanation of these terms and their advantages and disadvantages for our chosen target group of companies. The analytical part includes defined parameters by which it is conducted analysis of tools and their comparison. Business Intelligence solutions are divided according to arcitectural layers. The evaluation criteria are divided into financial, technical and user category. In conclusion, chosen tools are compared and evaluated. The main contribution of this thesis is comparison of open source business intelligence tools for implementation in middle size company. According to the EU directive, middle size company does not exceed 250 employees or profit is less than 50 million euros. The reader can compare the different solutions and their pitfalls or shortcomings that could be critical for the implementation.
|
|
Hrádek u Nechanic - Local Architecture and Its Source of Inspiration
Sieglová, Kateřina ; Kuthan, Jiří (advisor) ; Novotná, Eva (referee)
HRÁDEK U NECHANIC - ARCHITECTURE AND ITS INSPIRATORY SOURCES Chateau Hrádek u Nechanic was built by František Arnošt, the count of Harrach (1799-1884) as a new representative residence of the county family and also as a Harrach's earldom administrative centre. The foundation-stone of the carcass was layed in the year 1839 and the ceremonial laying foundation of the chapel took place two years later. The construction was officially completed in the year 1857 but works in interiors were practically proceeding during the whole second half of the 19th century. Subject of this work is architecture of the chateau Hrádek u Nechanic and its inspiratory sources. We talk about first large aristocratic building in the whole Habsburg Imperium that was in such an integral resemblance influenced by the english Gothic Revival phenomenon - an architecture, an interiors culture and a lifestyle. As an author of building plans is despite many obscurities considered Edward Buckton Lamb (1806-1869). It makes from count František Arnošt of Harrach propably the only one developer in the Habsburg Imperium who gave an order of a project for his chateau directly to an english architect. During the construction were made changes and adjustments by the vienesse architect Karl Fischer who took also a control of bulding. At the...
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Gramatová, Elena (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
|
Architect Bernhard Grueber (1806-1882)
Laštovičková, Věra ; Horyna, Martin (referee) ; Vybíral, Jindřich (advisor)
Bernhard Grueber (1806-1882) was invited to Prague in 1845 to become professor of Architecture at the local Academy of Arts. Being an experienced Bavarian architect from Munich, from the art centre of those times, he was expected to establish a high-quality school of architecture. This school had been founded not long before and his task was to bring up a new generation of creative personalities. Munich romanticism was supposed to become an alternative to Austrian state utilitarianism. Grueber was expected to enhance the vernacular architecture to the position of real art. But the conditions did not incline towards that. After the revolution of 1848 the emancipated Bohemian national movement did not support the production of the German artist. The task to revive vernacular art was entrusted to Bohemian artists. Neither German romanticism was found worth succession. And what more, Grueber provoked emotions of the Czech National Revival supporters with his art-historian works, where he emphasizes the common dependence of Czech art on German models. At the end he had to return to his native Bavaria in 1873. But paradoxically the young generation of architects of the end of 19th century, in their effort of finding the new true national style, drew from the same ideological source as the cursed architect: from...
|
|
Movements Identification on Aerodrome Ground
Burián, Petr ; Vosecký, Slavomír (referee) ; MBA, Viktor Sotona, (advisor)
The diploma thesis is concerning the A-SMGCS, surveillance technolgies, data fusion technologies and complex system providing identification of mobiles and aircraft on aerodrome ground. Describing architecture of A-SMGCS on Praha-Ruzyne airport and giving information about ANS procedures with A-SMGCS. Including Cost-Benefit analysis about instalation of automatic systems for localization and identification of mobiles and aircraft on aerodrome ground.
|
guest ::
