|
Teaching programme for general botany in the school garden
KOVÁŘÍK, Jindřich
he thesis proposes a teaching programme for general botany in the school garden. On the basis of a literary analysis of framework educational programmes, school educational plans, secondary-school textbooks of biology, assessment and evaluation of the school garden of The Secondary school of Agriculture and Food processing in Klatovy, a set of more than 85 questions and tasks has been made. The additional worksheets for pupils have been prepared just for the educational activity in the school garden. The method of direct study of nature is the most frequent one. The authentication of the teaching programme was carried out in the years 2010 to 2012 with the pupils of the aforementioned secondary school.
|
|
three-sied tipping body of trailer
Peňáz, Jan ; Hladký, Bohumír (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with proposal three-side tipping body of tractor semi-trailer with maximum weight 23 tons. In beginning the thesis includes background research part and design of conception body inclusive back door. In the middle part thesis contains the strength calculations using the finite element method, shape optimization and check strength calculation. Strength checks consider especially deformation and strain analysis in different load angle states. The work is finished by analytical calculations included partial body of semi-trailer. Enclosed are graphic illustrations results in program ANSYS Workbench. Part of the thesis is also design documentation. Work is created in co-operation with company ZDT Ltd. Body is designed for universal for multipurpose versatile body carrier Mega 230.
|
|
Design of manipulation table for workpiece rotating
Horák, Jiří ; Opl, Miroslav (referee) ; Pavlík, Jan (advisor)
This master’s thesis deals with the design of the manipulator for rotating objects, especially workpieces, semifinished products, or complete products around horizontal axis. It’s the manipulator for objects where is needed change orientation during production process. This thesis describes step by step construction of individual components of the manipulator and calculations of propulsive units. At the beginning the conveyor roller with propulsive unit is designed. The next step is construction of scissor lift table and choice of the propulsive unit. There is also made FEM analysis for the scissor mechanism. The next unit is aimed to the construction and computation of rotating and telescopic jaw. Then hydraulic circuit with computation of the propulsive unit is designed. As the final step the appropriate type of sensors are chosen and the step diagram of the manipulator is made. The manipulator is designed in the 3D model program and there are also made some assembly drawings.
|
|
Revitalization Program of Floral Garden in Kromeriz
Klimešová, Jana ; Šupler, Libor (referee) ; Jura, Pavel (advisor)
Project of revitalization of the Kvetna garden is based on historical background. The study fully respects todays situation and comes out from real possibilities and requirements. First of all the new building is situated in the historical surroundings with the international significance, which is protected by UNESCO. Within this study the visitor centre is designed in the area of the Holandska garden to accomplish nowadays visitors requirements.
|
|
Analysis of drawing contributions from the Regional Operational Programme in the Košice Region 2007 - 2013
Hupka, Peter ; Kalábová, Markéta (advisor) ; Abrhám, Josef (referee)
Regional policy is becoming one of the strategic priorities of the European Union after its extension. The main tools of the policy are subsidies for less advanced regions in EU. This work aims to evaluate the Regional operational programme in the Košice region during the programming period 2007 to 2013. In the theoretical part author describes the process of forming the European Union, the overall characteristics specified by EU funds and gives basic information on Slovak Republic and Košice Region. The analytical section is dedicated to the characteristics of the Regional operational program. This work compares the individual priority axes of the operational program and the successful utilization of the allocation. For an objective assessment Košice region is compared with other regions of the Slovak Republic at the level of priority axis. Based on the analysis the author reviewed the regional operational programme in the Košice region as successful with space for improvement in the fulfilment of allocations
|
|
Conceptual design of two-seat high performance car
Straka, Martin ; Blaťák, Ondřej (referee) ; Porteš, Petr (advisor)
is diploma thesis deals with design concept of two-seater sports car with the main focus on chassis torsional stiffness and axle kinematics. The main idea started with some paper sketches which were later transferred to the 3D model with all the main parts (engine, differential, driver etc.) using CATIA V5 design program. Then the torsional stiffness was counted using FEM software ANSYS 12.0. Finally the axis geometry during bump/rebump movement of the wheel was simulated in MBS system ADAMS 2007.
|
|
Automatic control for factory building heating
Prudek, Miroslav ; Voldán, Jiří (referee) ; Němec, Zdeněk (advisor)
The graduation thesis is focused on the automatic operating of heating of the production hall of První brněnská strojírnaVelká Bíteš, a.s. The thesis consists of an analysis of present state of the heating technology and solution of the general conception of the automatic operating of the heating. Integrated part of the conception is heat-up of the supply water and drain off of the condensation water from the air heating units. Outcome of this graduation thesis is a design of the algorithm for operating of the regulated system. Remote supervision and control of the regulated system shall be ensured by the visualization setting, which shall be implemented into the station of dispatching centre. The accuracy of the design of the part of regulated system shall be validated as a design of PID regulator with the use of “Matlab” program and it´s module “Simulink”. To set up parameters of the PID regulator, “Ziegler-Nichols” method shall be applied. The objective pay-off period of investments for regulation controlling system is figured out as a part of this thesis as well.
|
|
Technology of CNC milling
Vondrák, Jan ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
Common possibility analysis on milling machine, analysis possibility for programming in workshop oriented milling in system Sinumerik 840D ShopMill. Project alternative manufacturing technology including creation NC programme and technical economic valuation for part of Suspension globular screw in axis X.
|
| |
| |
guest ::
