|
Historical and Current Evolution of Components and Accessories of Mountain Bikes\\
ŠKARKA, Jan
The dissertation describes the historical development of chosen components of a mountain bike. From the beginning of the seventies until the model lines components of the year 2007. It is divided to two main parts. The first deals with general level of the given task which is performed by the history of bicycle and mountain bike. Then the survey of individual disciplines of the world racing cycling with the focus on mountain bike disciplines follows. The second part solves the own dissertation problems that gives the concrete survey of the development of individual components. The development is compiled from historical survey point of view and deals with essential and in little measure with uncommon constructional solutions.
|
|
The motivation of blood plasma donors between the ages of 18 to 26 in the Czech Republic in 2016
Vilímková, Helena ; Barák, Vladimír (advisor) ; Krebs, Vojtěch (referee)
This bachelor thesis deals with the motivation of blood plasma donors between the ages of 18 to 26 in the Czech Republic in 2016. The first part of the work defines and describes the system of blood donation and its components in the Czech Republic. Furthermore, the work examines fundamental theoretical concepts concerning blood plasma donation and it also explores private plasmapheresis donation centers. Finally, it inspects the motivation of blood plasma donors. The practical part of the thesis analyses author s empirical research. The collected data showed that the biggest motivation factor is financial compensation, despite the fact that positive feeling about oneself goes hand-in-hand with the financial reward in most of the cases. The rationale behind this practice is student s need to enhance their financial situation as they are yet to have full income.
|
|
Development of POS system application with support of EET for retail trade
Nguyen Manh, Tho ; Pavlíčková, Jarmila (advisor) ; Bruckner, Tomáš (referee)
The goal of this thesis is to design and develop an application software for the POS system. The main criterion of the developed system is to support online registration of sales, which meets the requirements stated by the Act no. 112/2016 Coll., on Registration of Sales. In this thesis the POS system is designated to support processes of retail trade. The theoretical part focuses on the description of the POS system and its components. To solve the issue of online registration of sales, an analysis of the legislation and the market with the POS systems was made. The thesis also presents an analysis of the processes and requirements, a solution design and the implementation of applications based on Java. To test the functionality of the developed application a test case was used. The final chapter summarizes the content of the thesis and outlines possible future developments. The output of this paper is a functional POS application, which will be available for download under open-source license. This paper could also serve as a business guide to understand the topic of POS systems and online registration of sales.
|
|
Building and use of smaller computer networks
Kyzivát, Marek ; Pinkas, Otakar (advisor) ; Šmejkal, Ivo (referee)
The thesis describes the initial state of the computer network Basic Schools and Kindergartens Ohradní (ZŠMŠ Ohradní) in Prague 4 and then its reconstruction, which I largely contributed. ZŠMŠ Ohradní consists of four pavilions and from one building on the other side of the street. The aim of this study is to assess the initial state of the network and point out the shortcomings that we discovered. We found deficiencies in the operation stress tests, measurements and data cabling overall analysis. Original networks connectivity was 100Mb/s. Together with a colleague, we are network administrators. Furthermore, I am going to introduce a new form of network, which has identified deficiencies improved, by using on newer technologies. I will describe its structure, address allocation, active and passive components, and operated services. New network is capable of 1Gb/s, and its spine is going to be 10Gb/s soon. Benefits of this reconstruction is faster, more stable and more modern network that will facilitate the work of employees of ZŠMŠ Ohradní. To these improvements, I have mainly contributed by measurements. I participated in the design and implementation of new form of data network. I collaborated with fellow Poc to the configuration of active elements and network services in reconstructed network.
|
|
Usage of unstructured data in Business Intelligence
Rakhmanova, Malika ; Šperková, Lucie (advisor) ; Karkošková, Soňa (referee)
The aim of the thesis is to identify the main trends that are occurring in the market of Business Intelligence and related to unstructured data, to describe the possibilities for integrating unstructured data, to clarify what the impact on the company have the results that can be obtained using these solutions and how generally incorporate an analysis of unstructured data into BI. Another aim is to show the current situation of processing unstructured data on the example of BI system. The thesis is divided into several parts. First part is describing of the Business Intelligence area and the basic components of Business Intelligence, as well as identifying market trends. Then, there is the next part: separating the data into structured and unstructured. Here is the part about how you can access and analyse unstructured data and what is their place in BI systems. This is the end of a block of unstructured data and the beginning of a description of the enhanced version of BI. Finally, the current market situation and BI tools, which include unstructured data, are introduced. This section provides an overview of how BI tools approach to analyse unstructured data. Existed literature, professional and freely available Internet resources are used for writing the work. The purpose is to serve as a source of information for quickly orienting in the current situation, to serve as a guide to the world of BI solutions and to show potential users what are the options and functionality of these BI solutions.
|
|
PM2.5 Chemical Composition at the Rural Background Site Košetice.
Schwarz, Jaroslav ; Cusack, Michael ; Karban, Jindřich ; Chalupníčková, E. ; Havránek, Vladimír ; Smolík, Jiří ; Ždímal, Vladimír
Measurements of atmospheric aerosols at rural background areas are important because they are not influenced by the urban emissions, and are therefore better suited to investigate the influence of long-range transport and trends in concentrations of individual pollutants. Summary of the measurements of total concentration and the concentration of PM10 and PM2.5 components was carried out in the works Putaud et al. (2004, 2010). Although the later work included the measurement of more than 60 stations across Europe, the post-communist countries contained data on PM2.5 from only four locations (Prague, Debrecen, Hungary, and two rural locations). Although Košetice place where this study was made, is also discussed there, it was for only PM10 and total carbon (TC). Therefore, the aim of this study is to fill this information gap, and provide additional information regarding the PM2.5 fraction and composition at the Central European background station Košetice.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016110313110 - PDF
|
|
Microbiota of the digestive tract of bees and related insect and the influencing facftors
Hroncová, Zuzana ; Havlík, Jaroslav (advisor) ; Kalous, Lukáš (referee)
This thesis consists of six research chapters, out of which, five have already been published in research journals, 1 is in the process of submission and the last chapter presents original unpublished confidential data in the process of manuscript preparation.
The research presented in this thesis concerns the complex mechanisms of bees and wasps immune system focused on microbiota as component of immunity. As shown in the introduction, highly social and managed species of bees like honey bees and bumble bees, play key roles in natural and agricultural ecosystems worldwide. Recent losses of bees have been attributed to pesticide exposure, poor nutrition, increased parasite loads and habitat degradation. Over the past several years, governments, beekeepers, and the general public worldwide have become concerned by increased losses of honey bee colonies, calling for more research on how to keep colonies healthy. Our main aim was to explore the complex mechanisms of bees and related species gut bacterial populations, their links to insect immunity and investigate the opportunities for an intervention. Part of our aim was to characterise the bumble bee and wasp gut microbiota using 16S RNA sequencing in a search for potentially novel bacterial species.
We have tried to explain how microbiome interacts with the host and showed that major members of these communities appear to benefit the host. The simple gut communities of social bees present ideal model systems to investigate the underlying evolutionary and genetic processes of such interactions. Information based on our results may help in the design of proper probiotic supplementation strategies with respect to physiological conditions in the honey bee gut.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Digital circuits test optimization by multifunctional components
Stareček, Lukáš ; Gramatová, Elena (referee) ; Kubátová, Hana (referee) ; Kotásek, Zdeněk (advisor)
This thesis deals with the possibilities of digital circuit test optimization using multifunctional logic gates. The most important part of this thesis is the explanation of the optimization principle, which is also described by a formal mathematical apparatus. Based on this apparatus, the work presents several options. The optimization of testability analogous to inserting test points and simple methodology based on SCOAP is shown. The focus of work is a methodology created to optimize circuit tests. It was implemented in the form of software tools. Presented in this work are the results of using these tools to reduce the test vectors volume while maintaining fault coverage on various circuits, including circuits from the ISCAS 85 test set. Part of the work is devoted to the various principles and technology of creating multifunctional logic gates. Some selected gates of these technologies are subject to simulations of electronic properties in SPICE. Based on the principles of presented methodology and results of multifunctional gates simulations, analysis of various problems such as validity of the modified circuit test and the suitability of each multifunctional gate technology for the methodology was also made. The results of analysis and experiments confirm it is possible for the multifunctional logic gate to optimize circuit diagnostic properties in such a way that has achieved the required circuit test parameter modification with minimum impact on the quality and credibility of these tests.
|
guest ::
