|
A simulation of R-curve by complete Gurson model
Stratil, Luděk ; Hadraba, Hynek ; Kozák, Vladislav ; Dlouhý, Ivo
The contribution deals with the simulation of R-curve using completed Gruson model of ductile fracture. The R-curve was experimentally determined for a Eurofer97 steel in previous study. The simulations of the tests were carried out by FEM software ABAQUS 6.11 in Standard and Explicit modules. The Gurson parameters were identified by single specimen method of smooth tensile test specimen and from metallographic examination of fracture micro-mechanism. The identification was supported by parametric studies. Comparing experimental and simulated R-curve the ductile tearing was not successfully achieved. Insufficient calibrated parameters as a result non-uniqueness problem of single specimen method were found.
|
|
Risk group of persons with disabilities on the labour market in Prague from 2005 to 2015
Hošková, Laura ; Maule, Petr (advisor) ; Lukášová, Tereza (referee)
The theoretical part of the Bachelor Thesis comprehensively illustrates the status and representation of persons with disabilities (PWD) on the current labour market in the Czech Republic. In a general manner, the Thesis looks at the employment policy as well; especially its legislative basis in the legal framework of the Czech Republic and selected EU countries. Furthermore, the legal obligations of employers of PWD and the possibilities of fulfilling the mandatory share of PWD employment are stated. Findings of two qualitative employment studies are presented showing that PWD enter the labour market equipped with specialized competencies, which they are willing to complete by retraining programmes in case of need. The employers perceive the employment of PWD mainly as a financial profit, granted to them by the state; and the legislative conditions are a sufficient incentive for them. The questionnaire survey pointed out that the weakness in the employment of PWD is the lack of part-time jobs, which are highly demanded among them. Therefore the Thesis presents a solution, which could be the creation of shared work positions.
|
|
The Bankruptcy of the FEREX-ŽSO spol. s r.o.
Procházka, Martin ; Schönfeld, Jaroslav (advisor) ; Smrčka, Luboš (referee)
This thesis is focused on the solution of the corporate bankruptcy. Its goal is not only to determine the causes of the bankruptcy of FEREX ŽSO spol. s r.o. after successful completion of the reorganization, but also to assess the suitability of the chosen method of solution in terms of the Insolvency Act. The work is divided into theoretical and practical part. The theoretical part describes the life cycle of an enterprise, important parts of the insolvency law and financial analysis methods. In order to meet the goals there are used financial analysis, analysis of the insolvency proceedings and comparison with results of researches in the field of insolvency.
|
|
Řízení IS/ICT se zaměřením na sourcing služeb informačního systému
Šebesta, Michal ; Voříšek, Jiří (advisor) ; Havlíček, Zdeněk (referee) ; Příklenk, Oldřich (referee) ; Král, Jaroslav (referee)
Research on outsourcing has been around for several decades, while recent evolution in the information systems discipline towards ICT service commoditization significantly changes the context of decision-making. Services that are available on-demand via the Internet allow organizations implementing functions they demand in a fraction of time. This trend represents a chance for organizations seeking to use advanced ICT services without a need of major investments. Problem is the current lack of guidelines and tools for managing ICT services and their outsourcing. Given the trends on the ICT service market, it is expected that much of the IT management in the future will encompass the ICT services and utilize service-level structures. Methods currently available are either too broad or encompass only small part of the whole problem. Ad-hoc or unsound decisions in this area might cause major complications in terms of quality, usability, integration, and consequently influence total cost of organizational IT. Organizations need to either revise existing models or propose and implement completely new models to manage their IS/ICT. This thesis deals with the management of IS/ICT with focus on the ICT services outsourcing. It discusses available sourcing models in the literature and links them to the various interconnected areas. Based on these areas, it presents an integrated view on IT outsourcing strategies. Most importantly the thesis proposes an original concept for decision-making about outsourcing of ICT services named the SOURCER framework. This approach utilizes the presented outsourcing strategies, and introduces a complex methodology and decision-making criteria that will assist organizations with selection of ICT services in order to maintain and manage a most suitable ICT service portfolio. The decision-making is based on four essential viewpoints: function, costs, time, and quality. These viewpoints are discussed, individually analyzed, and serve as a basis for further research. The whole framework is developed and validated according to Design Science Research Methodology (DSRM). Individual components are evaluated using a survey among a group of selected IT managers. Proof of concept is then established by a case study on framework use in a real organization. This case study covers strategy specification, business--IT alignment, specifying service architecture and its interconnections, outsourcing, and management of the ICT service portfolio.
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
The perspectives of tourism in the Canary Islands (with special focus on Gran Canaria)
Pazderová, Monika ; Abrhám, Josef (advisor) ; Havlíčková, Blanka (referee)
The Bachelor´s thesis is aimed at discussing tourism and analyzing diffferent perspectives of developement in the Canary Islands, namely in the island of Gran Canaria. The goal of this thesis will first be to evaluace the current situation of tourism in Gran Canaria. It is necessary to find the various perpectives of developement for this area, while also assessing strategic proposal plans in order to increase the competitive ability. The theorical section of this thesis is focused on tourism determination, and destination of tourism. In addition, the origin and developement of tourism in the Canary Islands is discussed. The practical part of this thesis is focused on tourism in Gran Canaria; the life cycle is applied to the destination of Gran Canaria, and there is a complete description of the attractions and infrastructure of the destination. Additionally, a SWOT analysis will take place analyzing the strengths, weakeness, opportunities and threats of tourism in Gran Canaria. In the final chapter, suggestions and solutions for tourism in Gran Canaria will be made based on strategic plans from the Canary institutions of tourism.
|
|
Export financing of complete industrial plants trade with state support
Šebesta, Ondřej ; Čajka, Radek (advisor) ; Taušer, Josef (referee)
The thesis deals with the financing of complete industrial plants exports with state support. The author is initially engaged in Export Strategy of the Czech Republic with an emphasis on companies founded by the state in order to support exports. Legislation in this field follows. The greatest emphasis is placed on methods of medium- and long-term export financing. One part of the thesis is a case study illustrating the possible practical way of financing export transactions.
|
|
The Conclusion of a Contract under the United Nations Convention on Contracts for the International Sale of Goods in Comparison with Czech National Legislation
Krčálová, Kristýna ; Boháček, Martin (advisor) ; Levý, Jan (referee)
This Master's thesis focuses on the United Nations Convention on Contracts for the International Sale of Goods (CISG), better known as the Vienna Convention. The main purpose of this thesis is to evaluate conditions for application of this international treaty and to assess the contracting process under the CISG including the similarities and differences with the Czech national legislation. Finally, it seeks an answer to the question, which of these rules (international or national) are more advantageous for a Czech contractual party with respect to concluding a contract. The thesis is divided into five parts. The first one represents an introduction to the CISG, its origin and the Czech Republic's attitude to it. The second part identifies the conditions for application of the CISG and therefore defines a subject and an object of an international contract of sale under the CISG. Both third and fourth parts gradually introduce two phases of the contracting process (offer and acceptance) including the relevant case-law. The last chapter strives to complete the contracting process with an analysis of the exact moment, when a contract is concluded, as well as with an analysis of a potential battle of the forms and its impact on a contract conclusion.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Food supplements and iodine supplementation breastfeeding women
IVANOVÁ, Markéta
Iodine is a trace element that is essential for the production of thyroid hormones triiodothyronine and thyroxine. Iodine deficiency had in the past result in many serious diseases and disorders. At present is in the Czech Republic considered mastered. However, Iodine deficiency are vulnerable to specific groups of the population, including pregnant and nursing women, because of their need and the recommended daily dose of iodine is increased. Breastfeeding women should receive adequate amounts of dietary iodine for optimal saturation for themselves and their child. Otherwise, exposing themselves and their child risk of diseases and disorders of iodine deficiency. Increased supply of iodine can be replaced by eating foods rich in iodine. In the event that you cannot increase intake of iodine - rich food preferences in iodine, there are various supplements that contain iodine. The aim of this thesis was to evaluate the intake of iodine supplements and supplements in nursing women and breast-feeding women to assess the awareness for greater needs of iodine and food iodine sources. There were set up the three research questions: How many nursing women used to supply iodine supplements and supplements?, What is the awareness of breastfeeding women need more iodine? and What is the awareness of breastfeeding women about dietary sources of iodine? A quantitative research strategy was used for the implementation of the research. The method used for data collection was made by an anonymous questionnaire. A questionnaire was handed in a printed copy to pediatricians and gynecologists in the southern Bohemia. With the doctors help were invited nursing women to fulfill the questionnaire. Part of the women was invited to complete the questionnaire directly. The research sample consisted of 117 female respondents. The research shows that 62 % of breastfeeding women know why it is important to increased need for iodine during lactation. But only 9 % of women know all the risks of iodine deficiency on the mother mentioned in the questionnaire and only one new mother knows all risk of iodine deficiency for infants listed in the questionnaire. The recommended daily intake of iodine properly reported or estimated 40.2 % of women. It turned out that 46 % of respondents from the research group used food supplements and supplements containing iodine. Each of these respondents used only one preparation with iodine. The most commonly used products were: GS mamavit, a Smart baby and Femibion 400 and Gravital. 43 % of respondents had used a dietary supplement containing iodine from the beginning of pregnancy and in 57 % of the respondents were informed about food supplements through a doctor (gynecologist, pediatrician). The results showed that awareness of breastfeeding women about food sources of iodine is not good. 67 % of women know that settlement higher needs iodine during lactation is possible by eating foods rich in iodine, but all food sources of iodine in the questionnaires (sea fish, seafood and seaweed, iodized salt, and milk and dairy products) registered only one respondent. 39 % of women known as a rich source of iodine, seafood, seafood and seaweed, iodized salt , but none of them knew that the rich and a good source of iodine is also milk and dairy products. Based on the results of the work would be desirable to issue educational print disabled educational material that could be used to increase awareness of not only women who are breastfeeding, pregnant women as well as the higher of the recommended daily dose of iodine and what foods to include in your diet in order to pay the increased intake of iodine. Provide information on supplements containing iodine, which can add missing quantities of iodine, what products are available and what are the currently preferred by nursing women.
|
guest ::
