| |
|
Potential of IoT in Smart City
Pavlíček, Tomáš ; Gála, Libor (advisor) ; Basl, Josef (referee)
The aim of this masters thesis is to identify, in which phase of adoption of Internet of Things (IoT) application areas of concept Smart City are nowadays Czech regional cities, what is their outlook to 2025 and also identify in which dimensions of concept Smart city, supported by IoT technologies, perceive Czech regional cities the greatest potential. Based on information obtained from the studied materials, the concept of Internet of Things (IoT) is described, along with a detailed description of one of its application area, namely Smart City. This area is further divided into specific dimensions, that cover specific application areas which can, through internet technology, support things in a special way. With these insights, the questionnaire (built on identified IoT application areas of smart city) was developed. Thesis should be beneficial for all towns in the Czech Republic, because it provides a comprehensive view of individual IoT application areas of concept Smart City including information on which of these IoT application areas are currently focusing regional cities, and on which they want to focus to the future. On the other hand, the survey results could also be beneficial for commercial entities, which focus on IoT implementation in cities. These entities will be able to recognise which IoT products are currently best for cities.
|
| |
| |
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
The Liberation of Pilsen 1945 in Photography
Křenová, Tereza ; SILVERIO, Robert (advisor) ; JANOŠČÍK, Václav (referee)
This bachelor thesis deals with liberation of Pilsen in May 1945 by american army in photography. The aim of this thesis is finding and collecting archival materials and placing them in a historical-political context. Communist regime changed the portrayal of historical events and directly influenced the amount of exisiting photographs, documents and lives of those who created them. Important part of this bachelor thesis is working with those archival materials – particularly with photographs capturing arrival of Americans and their stay in Czechoslovakia at the end of WW2. Both professional and amateur photographers created valuable photographs as they witnessed the liberation of Pilsen. These photographs became in spite of communist propaganda a clear evidence that Pilsen was liberated by american army.
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
| |
guest ::
