|
|
Verification of Numerical Simulation Using a 3D Optical System for Measuring Deformations
Zakl, Alexandr ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
This master’s thesis discusses the current state of optical metrology and its place in manufacturing and optimization of parts made by deep-drawing technologies. First part is devoted to building a solid knowledge base in different fields that this thesis draws from. These fields are Optical Metrology, deep drawing of sheet metal and simulations using finite elements method. Subsequently, in the experimental part there are chapters dedicated to Measurement and creation of material models and measurement of grid markings on deep-drawn parts provided by ACO Industries, measured by photogrammetric system from German Company GOM metrology. Additionally, for reference to the measurement, FEM software called PAM-Stamp is used to simulate and predict the final state of the parts after manufacturing. Furthermore, optical metrology was used during creation of material models, data supplied by this analysis was used as an input for the simulations. The last chapter then deals with the evaluation and comparison of measured and simulated data and drawing conclusions about the reliability of optical systems and modern technologies in technical practice.
|
|
|
Production process optimization
Habásko, Jakub ; Koška, Petr (referee) ; Fiala, Alois (advisor)
HABÁSKO Jakub: Production process optimization. The Master´s thesis of Master degree, second grade, school year 2008/2009, FME Brno University of Technology, Institute of Metrology and Quality Assurance Testing, October 2009, pages 68, pictures 40, tables 2, supplements 4. The project elaborated in frame of the Master degree, study branch Metrology and Quality Assurance Testing. This Master´s thesis deals with optimization of process plan. In virtue of submission was created an analysis present condition using of statistical methods and it was created suitable statistical methods applicable in production organization. Then is here described the problem of brazing bells, because in this place is originating the most of uptightness. Then the thesis brings recommendation and findings, which can help with optimization this process.
|
|
|
Risk Analysis of Construction Chemicals Storage
Ruml, Jiří ; Tabas, Marek (referee) ; Babinec, František (advisor)
Risk Analysis of Construction Chemicals Storge Diplom Thesis, Institute of Metrollogy and Quality Assurance Testing, Brno University of Technology, Faculty of Mechanical Engineering This diploma thesis focuses on risk assessment and possible assessment measure necessary when the amount of storage load containing Ethylbenzen increases by 300 percent.
|
|
|
Legislative safeguard metrology engineering running
Horká, Zdeňka ; Marková, Petra (referee) ; Pernikář, Jiří (advisor)
This thesis deals with legislative security scheme of metrology in engineering operation. The introduction includes description of state administration in the area of metrology and the summary of laws and regulations as well as the rights and obligations which result from the documents mentioned above. Practical part is focused on proposal of company regulations for engineering operation.
|
|
|
The expression of the accuracy of the gauge and measurement
Svobodová, Helena ; Koška, Petr (referee) ; Pernikář, Jiří (advisor)
The bachelor thesis deals with the issue of measurement, accuracy of measuring instruments and their expressing. It outlines the legislative basis of metrology in the Czech Republic and interprets the definitions of basic terms used in metrology. These definitions are listed in the new edition of International dictionary of metrology (VIM 3:2007). It specifies and exemplifies measurement errors and presents possibilities of their elimination. Further, it describes a simple way of measurement uncertainty determination. The aim of this thesis is to explain the issue in a way that it is understandable and can be applicable for the common metrology practice.
|
|
|
Measuring probe tips in engineering metrology
Böhm, Jakub ; Harčarík, Matej (referee) ; Jankových, Róbert (advisor)
This diploma thesis deals with measuring touches problems in industrial metrology. Thesis describes adhesive wear and tear which is caused by measuring probes when dynamical measuring is being concluded. Measuring of damaged component made of silumin and its different changes of texture by different measuring probes are evaluated. Measuring touches are made of titanium nitride, silicon nitride, zirconium, bearing chrome steel, ruby, experimental composite material and nanocrystalline diamond.
|
|
|
Calibration of contact and non-contact thermometers
Skalický, David ; Kazelle, Jiří (referee) ; Frk, Martin (advisor)
This work deals with the calibration of contact and contactless thermometers. The theoretical part describes physical laws, which are important for contact and contactless measuring of temperature, requirements for thermometers, suitability of use different types of thermometers and materials used for construction of temperature sensors. The following part describes metrology with the focus on metrology system of the Czech Republic. This thesis also describes errors and uncertainties of measurments, especially on their division, sources of uncertainties and methodology of type A and type B uncertainty determination. The practical part is focused on the calibration of thermometers within the Czech Metrological Institute and the Faculty of Electrical Engineering and Communication in Brno.
|
|
|
Calibration management system of measuring machine (CMM)
Lysý, Zbyněk ; Pernikář, Jiří (referee) ; Koška, Petr (advisor)
This diploma thesis with title of „Management of Coordinate Measuring Machine Calibration“ aimed to develop detailed analysis of uncertainties when deploying 3D coordinate measuring machine MicroVu Excel in practice. The analysis was supported by an example of measuring uncertainty calculation. This thesis also discusses the integration of automatic assessment of uncertainties into programming equipment; and creation of methodical calibration process for this kind of machine.
|
|
|
Facelift PDU
Zhakupbekova, Rakhil ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The subject of the diploma thesis is the elaboration of an architectural study of the reconstruction of the pre-plant zone of the Facelift of the Dukovany power plant. The construction site is an area that belongs to the village of Dukovany and borders the village of Rouchovany. As a whole, this area is in poor technical and architectural condition. However, its location gives potential for new uses. The solved area belongs to the ČEZ nuclear power plant.
|
|
|
3D Optical Measuring Systems Suitable for Metal Forming Technologies
Jelínek, Dan ; Štroner, Marek (referee) ; Peterková, Eva (advisor)
The project deals with use of 3D measuring systems operating with non-contact sensors in forming technologies. After the research of means to evaluate formability of materials, there are listed several important distributors of 3D metrology and described some of their measuring systems. Systems that are most usable in forming sphere are ARAMIS and ARGUS developed by German company GOM. These systems are often used for measuring of static and dynamic tests. Specifically for establishing values of major and minor strain, detection of critical areas, optimization of forming processes, measurement of thickness reduction or verification of numerical simulations. They can also depict forming limit diagrams, which can be useful in forming practise. Last part contains evaluation of specific measurement using GOM Correlate software.
|
guest ::
