|
|
Kindergarten FUTURUM
Bretterová, Anna ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Müller, Jan (advisor)
The content of the bachelor’s thesis is the design of a kindergarten in Brno, in the Masaryk’s district. The plot is a part of the school complex, where the Cyril and Methodius Church Elementary School and Cyril and Methodius High School already stand. The land here is sloping to the east. The design of the building with two above-ground and one underground floor corresponds to this. It is a new building of a preschool institution with two sections with capacity of 24 children per section without its own kitchen (food will be prepared in the kitchen for elementary school and high school and then transported to designed kindergarten). The building is situated in the eastern part of the plot and the western part is used as a garden for children. Barrier-free entrance to the building from Havlíčkova street is provided by a footbridge connected to the roof terrace at the level of the second floor. The building is bricked with Porotherm blocks. The construction of the ceilings is made of prestressed Spiroll hollow core slab. The roofs of the building are flat and partly walkable. Non-walkable parts of roofs are designed as green roofs. The facade of the building is horizontally divided into two parts. The lower part is lined with artificial stone and the upper part of the facade is made of white plaster. The windows in the children’s classrooms are round and different sizes. This element reflects children’s playfulness.
|
|
|
Artificial stone - methods of preparation and properties
Pluskalová, Barbora ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
The aim of the thesis „Artificial stone – Methods of preparation and it´s properties“ deals with the various methods and issues concerning the preparation of artificial stone. The thesis presents the summary of materials and various methods suitable for the preparation and points out mechanical properties, including durability of material, which serves as an alternative to natural stone. Further on, the thesis deals with the studies of binding systems based on geopolymers, which are used for the artificial stone preparation. This part of the thesis is associated with the experimental part, which is aimed at choosing the suitable mixing ratio of binder to aggregate in the artificial stone based on metakaolin geopolymer. According to the results of mechanical tests and aesthetic impression the author chose the best composition and then created a decorative element.
|
|
|
Návrh svietidla z umelého kameňa LG Hi-Macs
Harňáková, Barbora
In the process of creating a bachelor's thesis, a column lamp with possible variations was designed from LG Hi-Macs artificial stone. The work consists of two main parts, namely the theoretical and practical parts. In the first part, the material used, its development, technological processing and surface treatments are discussed today. It also includes the development of the design of lamps and light sources. The second part is already about the concrete, final design of the lamp, about the thought processes that gave rise to the ideal shape of the lamp. It lists all the necessary details related to the production of the final model as well as prototypes in which deficiencies were found.
|
|
|
Kindergarten FUTURUM
Bretterová, Anna ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Müller, Jan (advisor)
The content of the bachelor’s thesis is the design of a kindergarten in Brno, in the Masaryk’s district. The plot is a part of the school complex, where the Cyril and Methodius Church Elementary School and Cyril and Methodius High School already stand. The land here is sloping to the east. The design of the building with two above-ground and one underground floor corresponds to this. It is a new building of a preschool institution with two sections with capacity of 24 children per section without its own kitchen (food will be prepared in the kitchen for elementary school and high school and then transported to designed kindergarten). The building is situated in the eastern part of the plot and the western part is used as a garden for children. Barrier-free entrance to the building from Havlíčkova street is provided by a footbridge connected to the roof terrace at the level of the second floor. The building is bricked with Porotherm blocks. The construction of the ceilings is made of prestressed Spiroll hollow core slab. The roofs of the building are flat and partly walkable. Non-walkable parts of roofs are designed as green roofs. The facade of the building is horizontally divided into two parts. The lower part is lined with artificial stone and the upper part of the facade is made of white plaster. The windows in the children’s classrooms are round and different sizes. This element reflects children’s playfulness.
|
|
|
Povrchová úprava kuchyňských pracovních desek
Endlicherová, Veronika
This bachelor thesis deals with the problematics of kitchen worktops finishing. It evaluates the physico-mechanical, chemical, ecological, utility and visual properties of surface treatment of composite materials, wood-based materials and solid oak and cherry wood used for the manufacture of kitchen worktops. Solid wood samples were finished with a transparent polyurethane coating. In this research, the requirements for the surface finish of kitchen worktops were analysed. These materials are being compared in terms of physico-mechanical properties, as well as utility and appearance characteristics. The materials were subjected to tests in order to verify the resistances to cold liquids, wet heat, dry heat, falling bead, abrasion, scratch, steam, film hardness, surface gloss and color.
|
|
|
Vliv klimatických podmínek na pevnost lepených spojů MDF
Boštík, Vít
This bachelor thesis deals with the influence of the climatic conditions on bonding strength of MDF. Three types of bonded joints were used for testing – MDF-MDF, MDF-oak and MDF-artificial stone. The specimens were glued together with two component polyvinyl acetate adhesive. One half of testing joints was exposed to higher temperature and humidity, the second half of testing joints was exposed to normal conditions. After conditioning the specimens were subjected shear tension test. Then it was compared strength of bonded joints between normal conditions and higher temperature and humidity conditions.
|
|
|
Vlastnosti kuchyňských pracovních ploch
Plodíková, Lucie
This thesis deals with the surface of kitchen worktops. There are evaluated the physic-mechanical properties, chemical properties, ecological properties and also utility and visual properties of some selected worktop materials and decors. There are also analysed the requirements to worktop surfaces. In this thesis are verified these physic-mechanical and chemical properties and utility - resistance to cold liquids, resistance to wet heat, resistance to dry heat, resistance to falling ball and determine the surface hardness, surface gloss and colour shade of surface. Appropriate test were applied on these worktop materials - laminated worktop, compact laminate, Solid Surface (Technistone), Quartz Surface (Avonite) and granite.
|
|
|
Kvalita řezné spáry při dělení umělého kamene
Jálová, Lenka
The work is focused on the characteristic, properties and uses of artificial stone (category Solid surface) in furniture manufacturing. Beside other things, work deals with the process of machining, circular saw blades, water jet machining and methods for evaluating the kerf quality. The main goal is to assess the kerf quality for both different technologies of cutting and different Solid surface materials. Finally, the work is focused on assessing the significance of the circular saw blades geometry and their impact on the quality of machined surface.
|
|
|
Artificial stone - methods of preparation and properties
Pluskalová, Barbora ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
The aim of the thesis „Artificial stone – Methods of preparation and it´s properties“ deals with the various methods and issues concerning the preparation of artificial stone. The thesis presents the summary of materials and various methods suitable for the preparation and points out mechanical properties, including durability of material, which serves as an alternative to natural stone. Further on, the thesis deals with the studies of binding systems based on geopolymers, which are used for the artificial stone preparation. This part of the thesis is associated with the experimental part, which is aimed at choosing the suitable mixing ratio of binder to aggregate in the artificial stone based on metakaolin geopolymer. According to the results of mechanical tests and aesthetic impression the author chose the best composition and then created a decorative element.
|
|
|
Návrh konstrukčního řešení lehátka a multifunkční lavice z řady exterierového mobiliáře pro lázeňská a sportovní zařízení podle zadaných návrhů a požadavků
Závacký, Ondřej
The diploma thesis describes the construction design of a lounger and a multifunctional bench made according to the requirements of Cetecho s.r.o. and the architect Ing. arch. F. Wicherk. The carrier construction of the lounger and the bench is created from stainless steel sheathed with artificial stone. The construction design also consists of wooden base made from teak timber and additional upholstery. The construction design is based on the knowledge gained from studying the issue of stainless steel materials, artificial stone and their methods of joining, cutting and machining. The construction design is submited in the form of construction drawings, bills of material and economic balance in the level of direct material costs. The construction design is made in accordance with ČSN 91 0100.
|
guest ::
