|
Storage Hall
Filip, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The bachelor thesis deals with design of steel supporting structure of storage hall located in Vyškov. The hall has span of 36 m, length 48 m and inside height 6 m. The structure is made as purlin system with gable roof truss frames. Distance of frames is 6 m. Frames are made of doubled L profiled beams, conected by welding. Purlins consist of IPE and HEA profiled beams. The steel used in the project is S235 except for tension rods which are made of S355 steel. Following software was used while creating the thesis Autocad, Dlubal RFEM 5 and Microsoft Office. Output of this thesis is static calculation, drawings and technical report.
|
|
Exhibition pavilion
Španihel, Jiří ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.
|
|
Concert stage
Žák, Radek ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The bachelor thesis describes the structural design and structural analysis of load-bearing elements of concert stage. The building is situated in Tišnov. The structure consists of steel truss frame and it is divided into main part and two wings which are pin-supported by pin joints to the main part. The height of the structure is 12 m, length is 35.6 m and width is 15 m. The work also consists of drawings, engineering report and report of structural model created in computational software Scia Engineer.
|
|
Sports centre
Vančura, Jakub ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The aim of this master thesis is proposal of a sport center building. The proposal consists of design of a detached building with room for climbing gym, sauna, massage room and also space for fitness, spinning and yoga. A bar with area for relaxing is a part of the building as well. The sport center has two floors and no basement. Due to the climbing gym, the second floor does not cover all disposition of the second floor. The support system of the building is skeletal. Part of the building´s roof is supported by steel truss frames with purlins, another part with solid panel trusses with purlins. The cieling is made of holoribs and reinforced concrete. The building is covered by single layer roof and has ventilated facade.
|
|
Storage Hall
Filip, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The bachelor thesis deals with design of steel supporting structure of storage hall located in Vyškov. The hall has span of 36 m, length 48 m and inside height 6 m. The structure is made as purlin system with gable roof truss frames. Distance of frames is 6 m. Frames are made of doubled L profiled beams, conected by welding. Purlins consist of IPE and HEA profiled beams. The steel used in the project is S235 except for tension rods which are made of S355 steel. Following software was used while creating the thesis Autocad, Dlubal RFEM 5 and Microsoft Office. Output of this thesis is static calculation, drawings and technical report.
|
|
Concert stage
Žák, Radek ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The bachelor thesis describes the structural design and structural analysis of load-bearing elements of concert stage. The building is situated in Tišnov. The structure consists of steel truss frame and it is divided into main part and two wings which are pin-supported by pin joints to the main part. The height of the structure is 12 m, length is 35.6 m and width is 15 m. The work also consists of drawings, engineering report and report of structural model created in computational software Scia Engineer.
|
|
Sports centre
Vančura, Jakub ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The aim of this master thesis is proposal of a sport center building. The proposal consists of design of a detached building with room for climbing gym, sauna, massage room and also space for fitness, spinning and yoga. A bar with area for relaxing is a part of the building as well. The sport center has two floors and no basement. Due to the climbing gym, the second floor does not cover all disposition of the second floor. The support system of the building is skeletal. Part of the building´s roof is supported by steel truss frames with purlins, another part with solid panel trusses with purlins. The cieling is made of holoribs and reinforced concrete. The building is covered by single layer roof and has ventilated facade.
|
|
Exhibition pavilion
Španihel, Jiří ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.
|