|
|
Analysis of differential and non-differential filtering structures with adjustable current amplifier
Dvořák, Jan ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.
|
|
|
The Tolerance Analysis of Filters with CDTA
Miksl, Jan ; Jeřábek, Jan (referee) ; Šotner, Roman (advisor)
The bachelor thesis deals with the concept, design, modeling, tolerance and sensitivity analysis of the KHN filter using CDTA. The first part contains theoretical introduction about filters and their general properties. Secondly, the CDTA element, its block structure, schematic symbol as well as its circuit features are defined. Standard KHN filter structure with operational amplifiers is simulated. Results of this simulation are used for comparison with simulations results of CDTA KHN filter structure. The multifunctional CDTA KHN filter structure is simulated using ideal CDTA models, third-level models and models based on professional macromodels of attainable components (AD 844, MAX 435). Then tolerance and sensitivity analyses are explained and described. The following section discusses ways of modifying the structure and design KHN structure with CDTA models 3rd level. In the last chapter the circuit is optimized using PSpice and the attention is focused on achieving the best possible involvement of the typical characteristics of the elements of tolerance. In conclusion, the results of simulations are evaluated, compared the characteristics of circuit before and after optimization, and mention the advantages and disadvantages of filter elements with CDTA.
|
|
|
Fractional-order filter structures
Lefler, Filip ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
Semestral thesis deals with fractional-order frequency filters. There is descripe proposal of the filter, their simulations and practical realizations. The first part is focused at the introduction to a frequency filters. The following is chapter which explore various proposals fractional-order frequency filters. The next chapter describes used activ elements in this thesis. Then there is briefly described a method of the signal flow graphs. The following is a description of the theoretical design of lowpass and highpass frequency filter, where order of the filter is between the first and second. Another part deal with the design and simulation of the four circuits. There are two curcuits consists of transconductance amplifiers (BOTA) and two curcuist consists of current followers. The last part of the thesis deals with practical realization of the two fractional-order filters.
|
|
|
Electrical characterization of organic electrochemical transistors
Dundr, Jakub ; Prášek, Jan (referee) ; Gablech, Imrich (advisor)
This master’s thesis is focused on electrical characterisation of PEDOT:PSS based organic electrochemical transistors, it’s electrical parameters, physical properties and principles. This thesis further includes fields of usage of the OECT, mainly usage for bioelectronics. Last part of this thesis is focused on the measurement of the OECT electrical parameters including short introduction to the equipment for measurement. The outcome of this thesis is evaluation of PEDOT:PSS overlap on gold contacts in terms of observed electrical parameters.
|
|
|
Fractional-order filter structures
Lefler, Filip ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
Semestral thesis deals with fractional-order frequency filters. There is descripe proposal of the filter, their simulations and practical realizations. The first part is focused at the introduction to a frequency filters. The following is chapter which explore various proposals fractional-order frequency filters. The next chapter describes used activ elements in this thesis. Then there is briefly described a method of the signal flow graphs. The following is a description of the theoretical design of lowpass and highpass frequency filter, where order of the filter is between the first and second. Another part deal with the design and simulation of the four circuits. There are two curcuits consists of transconductance amplifiers (BOTA) and two curcuist consists of current followers. The last part of the thesis deals with practical realization of the two fractional-order filters.
|
|
|
The Tolerance Analysis of Filters with CDTA
Miksl, Jan ; Jeřábek, Jan (referee) ; Šotner, Roman (advisor)
The bachelor thesis deals with the concept, design, modeling, tolerance and sensitivity analysis of the KHN filter using CDTA. The first part contains theoretical introduction about filters and their general properties. Secondly, the CDTA element, its block structure, schematic symbol as well as its circuit features are defined. Standard KHN filter structure with operational amplifiers is simulated. Results of this simulation are used for comparison with simulations results of CDTA KHN filter structure. The multifunctional CDTA KHN filter structure is simulated using ideal CDTA models, third-level models and models based on professional macromodels of attainable components (AD 844, MAX 435). Then tolerance and sensitivity analyses are explained and described. The following section discusses ways of modifying the structure and design KHN structure with CDTA models 3rd level. In the last chapter the circuit is optimized using PSpice and the attention is focused on achieving the best possible involvement of the typical characteristics of the elements of tolerance. In conclusion, the results of simulations are evaluated, compared the characteristics of circuit before and after optimization, and mention the advantages and disadvantages of filter elements with CDTA.
|
|
|
Analysis of differential and non-differential filtering structures with adjustable current amplifier
Dvořák, Jan ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.
|
guest ::
