|
| |
|
|
Productive single parts from shet metal by the help of technology Hydro- Mac
Štancl, Jiří ; Dvořák, Milan (referee) ; Žák, Ladislav (advisor)
The project in this bachelor thesis solves a proposal of design technology production of extract from deep sheet iron 17240, thickness of 2 mm. Pursuant to of the literary pursuit a problem of the deep drawing, calculation and production of 40 000 pieces a year, was designed hydromecanical deep drawing. Drawing tool is fixed in hydromechanical press EMU 4000 by AP & T company. This press reaches nominal force of 4000 kN. Drawing punch is produced from instrumental steel 19 436, heat-worked according to drawing documentation.
|
|
|
Production of wash basin strainer
Pecha, Oldřich ; Štroner, Marek (referee) ; Podaný, Kamil (advisor)
Bachelor's thesis focuses on wash basin strainer fabrication technology. This rotary component will be made from ČSN 1.4301 (X5CrNi 18-10) material. Stated annual production is twenty five thousands completed products. Chosen technology for fabrication is drawing with no wall thinning with the use of hydraulic press LEN 25C. Tool for deep drawing will be used for completion. This tool's drawing documentation is enclosed in this thesis. Single-operation tool for deep drawing was designed. This tool contains blank holder, punch, die and gas spring. In the economical section was calculated that total cost of one product is 33 czech crowns. For the production to generate income at least 13 628 products would have to be made.
|
|
|
Design production of sink
Pecha, Oldřich ; Dvořák, Milan (referee) ; Podaný, Kamil (advisor)
Thesis submits concept of the sink fabrication technology where circular sink is made from rustproof austenitic steel 1.4301 (X5CrNi 18-10) using technology of conventional deep drawing without reducing wall’s thickness. Hydraulic press YL32 - 400 with nominal force 400 kN has been chosen as the production machine. Drawing tool with holder was designed to be used for this technology and its drawing documentation had been enclosed in this thesis. Size of the production series was set for 20 000 products annually. Control simulation of the drawing process has proven that designed component can be made and that computations are correct. Economic and technological estimation was performed which resulted in price being set for 555 czech crowns per piece. After manufacturing first 7 447 products the manufacturing process will become economically profitable.
|
|
|
Manufacturing of oil filter
Prokop, Karel ; Humlíček, Jaroslav (referee) ; Podaný, Kamil (advisor)
This thesis deals with the proposal of an oil filter body manufacture. The oil filter body is a rotational part made of DC02 deep drawing steel. With respect to the material, geometry and the size of the production, a deep drawing technology which does not consider wall thinning, was chosen. It was decided about necessity of five drawing operations. Suitable presses for a notching line and the very drawing were selected. Next part of the thesis is given to the design of the rolling tool construction. A drawing die for the first operation is described in details, including the controls and drawings. The economic part compares variants with the requirements of monthly production of 50 000, 180 000 and 350 000 pieces respectively. Due to the economic study, the production of 180 000 pieces per month was chosen.
|
|
|
The Production of the oil pan
Šupa, Jan ; Žák, Ladislav (referee) ; Císařová, Michaela (advisor)
The dissertation deals with a suggestion of the production of an oil pan into the car with a deep drawing. The part will be produced out of a deep drawed steel plate – class 11 305 (DC04). On the basis of a calculation and the study of the corresponding literature about the deep drawing a reverse drawing in a convention tools with a blank holder has been suggested. The part of the machine will be also an upper ejector for the fall of a sticking of a drawn part in the die. As a semi-product a blank has been chosen, which is burned out from the piece of plate with the dimension of 2500 x 12500 mm and thickness 1 mm with the help of the laser. The production quantity is 30 000 per one year. As a forming machine a universal hydraulic presser CTH 250 from the Czech company Žďas a.s. with the nominal power 2500 kN has been chosen.
|
|
|
The suggestion of technology of protection cover
Vágner, Vladislav ; Šlais, Miroslav (referee) ; Podaný, Kamil (advisor)
he project executed in frame of Bachelor study presents a suggestion of manufacturing technology of cover made of deep drawing sheet iron DC 04. The theses includes comparing of possible manufacturing technologies and elaboration of manufacturing procedure by deep drawing. Based on calculation was discovered that there are four drawing and one calibrating operations needed. The CTC 250 press was chosen and for it was the tool designed for a first draw. In the theses was included economical-technical evaluation which shows that set of 50 000 pieces a year is profitable.
|
|
|
Optimization of production process of drain
Staněk, Vojtěch ; Chudík, Ivan (referee) ; Podaný, Kamil (advisor)
The project looks for a solution to optimalization of rotational deep drawn part with flange production. It deals with sewerage drain, which is produced by conventional tool to two deep drawing operations. The used material is austenitic Cr-Ni stainless steel 1.4301. Suitability of this material for deep drawing operations was considered by means of the tensile test and the Erichsen test. On the bases of these results, serializability of production and theoretic relationships for determination of number of deep drawing operations, it was decided upon one operation serial production, by conventional tool without attenuation thickness of sheet. Production will take place on hydraulic press Dieffenbacher PO250 with magnetic tool fastening. The deep drawing tool was designed and constructed. For series of 2 000 units per year the rate of return was calculated after 4,7 years, while using the punch from the current second deep drawing operation it was calculated after 3,4 years.
|
|
|
Production of wash basin drain grid
Běhounek, Martin ; Staněk, Vojtěch (referee) ; Podaný, Kamil (advisor)
This thesis deals with a draft on manufacturing a sink grill. It is a rotary component that is made of corrosion-resistant steel 17 240. Considering the material, the shape of the component and the size of the production lot of 100 000 pieces a year, the suggestion for manufacturing this component is a technique of a deep drawing with no wall thinning. It has been decided that the trimming will be done with a progressive blanking die and the deep drawing will be done with the use of pressing machine LKDA 315. One part of this thesis is a draft of a design of a tool for deep drawing enclosed in a drawing documentation. In the economic segment, there is a total of expenses for one product which is 9 CZK. Production becomes profitable after manufacturing 67 308 components.
|
|
|
Production of the shape cover
Žilka, Daniel ; Staněk, Vojtěch (referee) ; Podaný, Kamil (advisor)
This thesis deals with a project for production of output shaft cover for agricultural technique which is made of deep drawing steel DC04. On the basis of component geometry, material and contract volume (10000 pieces per year) the drawing technology without wall attenuation has been chosen. A production plan has been processed for this technique. Drawing will be realized within four operations in a modularly solved tool in double-acting hydraulic press Ždas CTH 250. A die design is a part of the thesis, the drawing tool for the first operation is described in detail. Within economic assessment a product price is counted and contract profitability is evaluated
|
guest ::
