|
| |
|
|
Family House
Podola, Lukáš ; Dostálová, Darina (referee) ; Matějka, Libor (advisor)
The goal of this bachelor thesis is to partly elaborate the project documentation of a family house. The building is situated in Lipník nad Bečvou (Přerov district) in a town part called Seminárka, which is an area assigned for this purpose in the town's land use plan. It is a three storey house with two aboveground floors and a basement. The construction is designed to be bricked in Wienerberger Porotherm system and with flat roofs. It is suited for a four to six membered family. The house consists of eight residential rooms and garage for two cars.
|
|
|
Airport Zábřeh
Rycková, Silvie ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
Subject of my master´s thesis is to make a project documentation for a new building of airport. The building is three–storeys, without basement. Foundation strips are used as a foundation system of the building. Floor plan of the building is in a rectangle shape. The building is designed from YTONG construction system. The building is covered by a flat roof.
|
|
|
Apartment building
Kundelová, Daniela ; Ladomirjáková, Jitka (referee) ; Sobotka, Jindřich (advisor)
The main objective of the Bachelor´s thesis is project documentation of the execution of an apartment building situated in Nové Dvory. The apartment building is designed as detached, with three above-ground floors and part basement. On each floor are two residential units. One of the first-floor apartments is managed as barrier-free. The vertical load-bearing structures in above-ground floors are designed from ceramic blocks Porotherm. In the basement are designed concrete blocks from lost formwork BEST. The ceiling constructions are resolved as ceramic brick inserts and concrete beams Porotherm. Stairs are made out of reinforced concrete. The object is based on foundation strips made of plain concrete and is covered with a single-skin flat roof. The building will be insulated with contact thermal insulation system ETICS.
|
|
| |
|
|
Family House
Kozáková, Lucie ; Šteffek, Libor (referee) ; Matějka, Libor (advisor)
The goal of this Bachelor thesis is the design and project documentation for a residential house. It is designed as a single-family detached, three-story house with a partial basement and a developed attic. The foundation system of the house is supported by MONOLITHIC foundation grade-beams. The support system of the partial basement is designed with the use of concrete blocks. The wall system of the rest of the stories uses the POROTHERM masonry system. Ceiling structures are comprised of POROTHERM ceramic-concrete members with MIAKO brick inserts. The designed proposes a two-layer ventilated flat roof. The building is situated on a level ground.
|
|
|
The flat building in Znojmo
Kučera, Filip ; Janda, Lukáš (referee) ; Beneš, Petr (advisor)
The bachelor thesis deals with proposal of the new flat building. The flat building is located in the edge part of Znojmo. The building is situated in built-up area, intended for housing. The building is solved as detached house in the flat terrain. This is a three-storey building without cellar, which is finished by warm flat roof. On the ground floor there is a garage, a common spaces and a utility room. On the first and second floor there is four dwelling units, which are identical layout. There are flats 3+1. The building is based on foundation strips from concrete strip footing and is made by the building system Porotherm.
|
|
|
A Family House with Comercial Premises and a Garage
Chylík, Lukáš ; Kalánek, Jiří (referee) ; Skála, Jiří (advisor)
This bachelor´s thesis (A Family House with Commercial Premises and a Garagewas) was prepared at the level of a project documentation. It is a detached house in the village Heřmanov at Krizanov, designed as a three-storey, a basement, a built-in garage house with and gable roof. The building is based on the foundation walls. Bearing and non-bearing walls are lined by Porotherm blocks. Ceiling structure consists of ceiling beams and bricks Porotherm PTO inserts Miako. The roof structure is designed as a gable truss structure which comprises two mutually perpendicular roof plane. There are proposed a garage, a clubhouse, a storage and an utility room in the basement and living rooms in the first and second floor. There is an establishment with its own bathroom and a private entrance in the first floor. A Natural ventilation and lights are made by wooden windows. Layout and paper are attached as a part of the project.
|
|
|
Office building
Výborný, Vojtěch ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
This master´s project deals with design of an office building nearly zero energy standard. My master´s project consists of three parts. In the first one I work on technical design of the office building. It is a three-storey building with partial basement. Vertical load-bearing system is partially made from monolithic concrete walls and partially from clay blocks walls. The horizontal load-bearing structures are made of monolithic concrete slab. All roofs are designed as flat roofs. In second part I design all technical equipment in this building. In the last part I compare three types of roof, photovoltaic power plants and evaluate their environmental impact. First type of PV power plant is made by monocrystalline solar cell, second one by polycrystalline solar cell and last one by monocrystalline solar cell with battery system. Environmental impact of these systems is evaluated in Open LCA software. All structures comply with the valid standards and regulations.
|
|
|
Block of flats, Újezd u Brna
Sedláček, Ondřej ; Macků, Michal (referee) ; Müller, Jan (advisor)
This work deals with a new building – block of flats on land no. 1799/1, 1800/1 cadastral Újezd u Brna, region Brno - venkov. This building contains 15 individual flats. The object is geometrically divided on central part with gabled roof and 2 side parts with hip roof. Slopes of roofs 10°. Building is designed as three-storey object without a cellarage, whence all three storeys are residential . The building is accessible from local road and it is possible to park a car next to the object in new-build parking place. Residential rooms are positively rotated to south and ventilated naturally. All the residential rooms are exposed to direct day light. Sidewalk and hard surface are treated as concrete and scrubbed pavement. Construction peripheral bearing masonry, interior bearing masonry and cross buntons effected from ceramic breeze-block POROTHERM. Ceilings plates are made of reinforced concrete. Staircase are made of reinforced concrete as well.
|
guest ::
