|
|
Hotel
Machala, Tibor ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This thesis presents a design of a new building — hotel, containing thirty accommodation units, space for employees, restaurant and vine bar meant for both customers of the hotel, and public. Hotel is situated in a cadastral area Brod nad Dyjí. Building consists of basement and five floors with proposed accommodation capacity of sixty people. The basement perimeter walls are designed from reinforced concrete with the width of 300 and 400 mm. The walls are insulated by XPS polystyrene which is 220 mm wide. Perimeter walls of the above-ground floors are proposed as a combination of reinforced concrete and reinforced skeleton concrete supplemented by masonry wall of therm type. All these constructions are insulated by 220 mm wide glass wool facade insulation. The building envelope is a light ventilated facade. All horizontal constructions are projected as reinforced concrete slabs with the width of 250 mm. The roof of the building consists of three flat parts. The lowest part of the roof is designed as a vegetation roof with extensive layer. The roof of the hotel is proposed as walkable with wear layer made of concrete pavement of dimension 400 x 400 mm. Construction of the roof above the fifth floor is designed as one layer flat roof on concrete slab with the width of 250 mm. Inside the object are three reinforced concrete staircases (main staircase, emergency staircase and staircase for staff). The main entrance to the object is situated on the south side of the property, while the staff entrances are located on the east and north-east part. Parking for the object customers is placed in front of the main entrance, parking for staff is situated on the north side. This thesis is processed in the form of project documentation for construction realisation.
|
|
|
Detached house with a café
Bíza, Petr ; Čech, Miloslav (referee) ; Utíkalová, Ivana (advisor)
This bachelor's thesis focuses on design of detached house with a café situated in town of Mutěnice near Hodonín. The documentation of this project is elaborated with regard to contemporary Czech legislative and standards. The house is situated on plot number 1609/2 in Mutěnice. Near the house is located class III. roadway and common infrastructure. In front of the building is paved driveway and parking spots for café customers. It is double floored building with one flat suitable for 4 inhabitants in ground floor and coffee house and garage for one 1a class vehicle in basement. Basement level is mostly under surrounding terrain except for its southern fasade which is facing the street. Buildings platform has an irregular shape with dimensions 18,0 by 16,0 meters. Foundations are made from plain concrete. Vertical supporting structures are made from Ytong porous concrete blocks, basement walls are made from concrete blocks as permanent shuttering combined with reinforced concrete. Ceiling is made from reinforced concrete girders with Ytong ceiling blocks. Ceiling above a coffee house is designed as reinforced concrete board. The object has a gable roof which consists of wooden trusses. The ceiling above ground floor is made from gypsum plaster panels with thermal insulation fixed into roof trusses. Above a café is a flat roof which is split in two parts where the first part is made as terrace and the second part is a vegetative green roof. In front of the café and over part of garage is shed roof. This thesis contains study works, project documentation plans and reports, heat engineering calculations, fire safety report and essay dealing with the issue of green roofs.
|
|
|
Family house with an establishment
Jelínek, Jan ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
This bachelor thesis presents a project documentation of a family house with en establishment - café. The building is situated in the city called Brtnice in a newly developed location „Na Nivě“. The house has two floors and is partly basemented. The coffee bar is only in part 1NP. Residential area includes all three floors, which are connected through a direct stairscase. The house has plain concrete bands foundation. All masonry work is done by HELUZ and BEST. The roofs are flat on reinforced concrete ceilings. The project also includes a garage for two vehicles.
|
|
|
Detached house with a workshop
Kynclová, Eliška ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor´s thesis is design documentation for construction of family house with parlor. House is designed for family of five members. The family house is located on a flat plot. The building has ground floor and basement. The building has a partial basement with two above-ground floors. The object is based on basic passports. The vertical perimeter structures are designed from the Porotherm system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by flat roofs and shaped roof. Drawings were worked out in software Archicad.
|
|
|
Detached house on a sloupe
Vincenc, Lukáš ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is design documentation for construction of family house. House is designed for permanent housing for family of four members. The building has one above-ground and one underground floor, which is set into the slope. The plan of the house is T-shaped. Vertical circumferential and supporting constructions are designed according to Porotherm system and are equipped by contact thermal insulation system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by shaped roof.
|
|
|
Apartment building
Götthansová, Sylvie ; Párová, Jitka (referee) ; Rusinová, Marie (advisor)
A subject of bachelor thesis is a new apartment building and the processing of the design docu-mentation for construction. The apartment house is located on the outskirts of Olomouc. The surrounding area consists mainly of apartment buildings. The building is designed as a free-standing building with four above-ground floors and one basement. In the basement of the building there are cellars for each apartment unit, technical facilities of the building and a common room. There are 9 apartment units on the above ground floors. On the third and the fourth floor are designed maisonette apartments. Vertical supporting structures in the basement is made of concrete blocks, on the upper floors of ceramic blocks of THERM type. The ceilings are made as cast-in-place reinforced slabs. The roof is designed as a pitched roof.
|
|
|
Block of flats
Hanuláková, Mária ; Hrabovský, Kristián (referee) ; Benešová, Romana (advisor)
The goal of my bachelor´s thesis was to process the project documentation of the Rajhrad building,which is determined for living. Building is in Rajhrad city, in cadastral area of the city. Building is constructed as permanent build for living with 8 residental units located on 4 floors. The entire building has a basement on a slightly sloping terrain, while in the basement are store spaces designed for each apartment. 1st and 2nd are identical and they has 2+kk apartments and studio. At the 3rd floor is studio too, but there are 2 maisonette apartment, which continues to the 4th floor. A monolitic reinforced concrete stairs and personal elevator are conecting this floors. The entrance is on north side of the building. The building has wheelchair-accessible ramp. As a part of the project is parking lot for 18 cars, 2 of them are for limited mobility people. The construct system is a longitudinal wall, while basement walls are reinforced concrete and walls of the floors are made of porotherm ceramics bricks whith a thickness of 300mm, Inside load-bearing walls are porotherm 300mm thick, partitions are 140mm thick. Ceilings are made of ceramic beams and miako inserts. The staircase is a monolithic reinforced concrete double-arm. The structural height is 3.25m and the clear height is 2.9m. The entire building is insulated with the ETICS contact insulation system and covered with an impassable flat roof.
|
|
|
Nursing home Ivančice
Blümelová, Adéla ; Kalánek,, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of the thesis is to design and develop project documentation for the new construction of a retirement home. The old age home is located on a piece of land in Ivančice. The building has been designed as a stand-alone building and is divided into two parts SO 01 and SO 02. Part SO 01 has three above-ground floors and a connecting corridor that has four above-ground floors belonging to it. This whole part has a basement. The operation of the laundry and kitchen is located in the basement, which also includes cleaning facilities, a garage, workshop, mortuary and technical facilities. In the first above-ground floor there is a dining room, doctor's office, offices, a cafe and a hairdresser. Rooms are located on the second and third floors. This section is tailored for clients with Alzheimer's disease and senile dementia. There are seven double rooms on each floor. Part So 02 has four above-ground floors without a basement. There are eight double rooms on each floor. Implementation documentation has been processed for only object So 01. The retirement home is based on reinforced concrete footings and belts. The structural system consists of reinforced concrete columns. The perimeter walls in the basement are reinforced concrete. On the above-ground floors, the outer shell is made of infill masonry of ceramic blocks of the THERM type. A reinforced concrete slab is designed as the ceiling structure. The staircase is one piece also made from reinforced concrete. The balcony slabs are prefabricated. The roof is flat. The building envelope is insulated with the ETICS contact insulation system.
|
|
|
Multifunctional building
Motl, Matěj ; Párová, Jitka (referee) ; Rusinová, Marie (advisor)
The proposed multi-functional object of this diploma thesis is located not far from Kraví hora, which is visited by tourists and sportsmen, near the FAST VUT school campus. The land with a total area of 4,000 m is situated in such a way that it is bordered by a road on the eastern and northern sides. Thanks to this, good traffic service is ensured. The building is located on the eastern side of this property. 2 slopes are built on the north side. One leads to the building's underground garage and the other to the above-ground parking lot. The capacity of the underground garage is 22+2 spaces, the capacity of the external parking lot is 9+2 spaces. The underground parking lot is also operationally connected to the building by an elevator and a staircase. The outside parking lot is connected by side entrances and a pedestrian walkway that leads to the main entrance. The main entrance to the building is located on the east side of the building. Due to the slope of the terrain, the difference in height is solved by a staircase and for people with limited mobility a side ramp. The newly created building has 5 floors. The already mentioned underground garages are located in the basement. On the first above-ground floor there is an entrance hall, hygiene facilities, a cafe, an exhibition gallery and an outdoor parking lot. On the second floor, there are offices, meeting rooms, sanitary facilities and a kitchen. On the 3rd floor there are offices, meeting rooms, sanitary facilities and a kitchen. The machine room of the air handling unit is located on the 4th floor. The building is designed as a frame reinforced concrete structure made of prefabricated parts. The cladding of the building is ensured by ground brick blocks and the ETICS contact insulation system. The vertical supporting elements are reinforced concrete columns, which are based on foundation footings. In the place of the staircase, a core of reinforced concrete monolithic wall is realized. Horizontal constructions consist of beams and girders. The ceiling structure consists of pre-stressed reinforced concrete ceiling panels. The roof structure is single-skinned, flat. The load-bearing structure of the roof consists of pre-stressed reinforced concrete ceiling panels.
|
|
|
Hotel Špindlerův Mlýn
Boulaouad, Hichem ; Picmaus, Petr (referee) ; Brukner, Bohuslav (advisor)
The subject of the diploma thesis is the project documentation developed at the construction stage for a new hotel with restaurant and wellness. The hotel is located in Špindlerův Mlýn and is designed as a stand-alone hotel. The hotel has two floors above ground, an attic and a basement. The floor plan of the hotel is designed in the shape of a cross with a penetrating rectangular annex over the basement and the first above-ground floor. The outbuilding is covered with a flat vegetated roof, and the main, highest mass is covered with a saddle-shaped and semi-hip-shaped sloping roof with a 40° slope of the roof plane. The layout of the hotel includes a collective garage and a wellness area in the basement, while the first floor has a restaurant, a congress room and an accommodation area with nine hotel rooms, two of which are wheelchair accessible. On the second floor above ground level and the attic there is only an accommodation area with two gyms, each of these two floors has nineteen hotel rooms. In total, the hotel offers accommodation for seventy-five people. Structurally, it is a building based on a foundation slab, the load-bearing vertical structures are a combination of reinforced concrete and masonry ground hollow bricks, the ceiling structures are made of reinforced concrete ceilings and the roof structure is made of a wooden purlin truss. The entire object is insulated with an insulation system.
|
guest ::
