|
|
Internal Communication in Selected Company
Králová, Pavla ; Kroupa,, Tomáš (referee) ; Černohorská, Lenka (advisor)
The diploma thesis focuses on internal communication in selected company. It deals with communication, the members in communication and stress. It analyzes internal communication in selected company by means of observation and questionnaire survey of the group of leaders and employees, and then draws several suggestions for improvement of situation in selected company.
|
|
|
Administrative building
Polerecká, Katarína ; Pešek, Ondřej (referee) ; Štrba, Michal (advisor)
The aim of this thesis is design and assessment of the steel structure of the multi-storey administration center in Martin. Floor plan dimensions are in the shape of a square 40 x 40 m. Column spacing is 8mx8x. Building has 6 floors and total height is 22,2m. Floor and roof structure is made of steel-concrete composite slab . Part of the work is analyze two different versions. Version A has longitudinal rigidity due to truss bracing. Rigidity of Version B has is ensured by frame conections between beams and columns.Version A was selected as better solution. All parts, except truss braicing is made of rolled beams. The whole structure is made of steel S355.
|
|
|
Reconstruction of the bridge in the town Ledeč nad Sázavou
Lidmila, Ladislav ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
Diploma thesis deals with reconstruction of old beam bridge in town Ledeč nad Sázavou. Three variants of reconsttruction were done. Detailed structural design report was done to one of them, streithening with post-tensioning. Calculation of load effect was solved with finite elemet method via software on grillage model. Construction was checked on ultimate limit state and serviceability limit state. Necessary drawings were elaborated to chosen method.
|
|
|
Cast-in-place tank of sewage plant
Lidmila, Ladislav ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with structural design and check of cast-in place tank of sewage plant. Solved elements are floor slab, walls and foundation slab. Calculation of load effect is done three methods: manually, per tables and finite element method per software. Elements of tank are checked on ultimate limit state. Load-bearing capacity of subsoil and settlement of tank are checked too. Next are processed reinforced drawings and formwork drawing.
|
|
|
Proposal for Development of Manager Abilities and Skills
Drekslerová, Renáta ; Dvorská, Jana (referee) ; Pokorný, Jiří (advisor)
The managers are important persons for easygoing operation of companies. That is why I am concerned with their skills and abilities in this dissertation. Thank to these skills and abilities can managers help companies to come through the market or not. I will try to suggest solution for three managers after analysis of their personalities. This solution can be helpful for development of companies, where they work in.
|
|
|
Preparation and testing of lightweight composite materials
Peroutka, Jakub ; Bartlová, Milada (referee) ; Žídek, Jan (advisor)
This thesis deals with simulation of composite origami-like auxetic materials, which exhibit self – assembly effect (SE). The freeware named INKSCAPE was used for preparing structures. Simulations were made by MATLAB with GIBBON plugin using finite element method. For structure evaluation, freeware programme FEBIO Studio were used. The theoretical part was divided into four sections – auxetic materials, shape memory polymer materials, self-assembly auxetic materials and thermal expansion of auxetic materials. Each section contains of basic information and knowledge from its category. For each area of the theoretical part, literature searches were conducted based on the latest findings on the given topic. The experimental part consisted of simulations of prepared structures and their subsequent evalution using MATLAB programme. Simulations were performed for two types of auxetic structures that differed in the size of external angle (121,99 °and 131,78 °) in total. In the next step, simulation of cubic structure with dimensions 20 × 20 mm was performed. The prepared auxetic structures were composed of two neo- Hookean materials and were further divided into homogeneous, two-layered and multi-layers structures. For two-layer and multi-layer structures, a thermal expansion simulation was performed, and with the help of the values obtained from the simulation of the cube structure, the temperature change was calculated for individual simulation states, which were randomly determined. Furthermore, stress histograms were made for prepared structures and the most frequent stress value for the given simulation state was determined. The last part consisted of determining the thermal expansion of the simulated materials. Coefficient of thermal expansion of prepared materials was calculated using data obtained during each simulation of the cubic structure of dimensions mentioned above.
|
|
|
Conflicts within relationship
DRNKOVÁ, Veronika
The bachelor thesis deals with mapping of conflict within relationship. It consists of a theoretical part where the main themes of the work will be presented according to the specialised literature and practical part where will be described qualitative reseach. The practical part is devoted to qualitative research and the main method of data collection is an in-depth semi-structured interview. Next chapter consist of five case studies which reveals problematic topics and triggers of the conflicts of the interviewed partners. The aim of this work is to present the most common areas of conflict in a relationship and to illustrate areas that are problematical for couples.
|
|
|
Reconstruction of the bridge in the town Ledeč nad Sázavou
Lidmila, Ladislav ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
Diploma thesis deals with reconstruction of old beam bridge in town Ledeč nad Sázavou. Three variants of reconsttruction were done. Detailed structural design report was done to one of them, streithening with post-tensioning. Calculation of load effect was solved with finite elemet method via software on grillage model. Construction was checked on ultimate limit state and serviceability limit state. Necessary drawings were elaborated to chosen method.
|
|
|
Administrative building
Polerecká, Katarína ; Pešek, Ondřej (referee) ; Štrba, Michal (advisor)
The aim of this thesis is design and assessment of the steel structure of the multi-storey administration center in Martin. Floor plan dimensions are in the shape of a square 40 x 40 m. Column spacing is 8mx8x. Building has 6 floors and total height is 22,2m. Floor and roof structure is made of steel-concrete composite slab . Part of the work is analyze two different versions. Version A has longitudinal rigidity due to truss bracing. Rigidity of Version B has is ensured by frame conections between beams and columns.Version A was selected as better solution. All parts, except truss braicing is made of rolled beams. The whole structure is made of steel S355.
|
|
|
Cast-in-place tank of sewage plant
Lidmila, Ladislav ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with structural design and check of cast-in place tank of sewage plant. Solved elements are floor slab, walls and foundation slab. Calculation of load effect is done three methods: manually, per tables and finite element method per software. Elements of tank are checked on ultimate limit state. Load-bearing capacity of subsoil and settlement of tank are checked too. Next are processed reinforced drawings and formwork drawing.
|
guest ::
