|
|
Inventure of the City Center ? Brno – Veveří – Žerotínovo náměstí
Holá, Martina ; Chládek, Pavel (referee) ; Hybská, Bohumila (advisor)
The main subject of the thesis is a revision of current area framing northwest part of Žerotín Square, that nowadays consists of so called White house (center for children health care and a seat of a medical school). The design is based on theoretical situation concerning the removal of White house and therefore it uses the newly existing place as a subject for new architectural solution. The solution emphasizes the completion of current block of buildings with large courtyard and corner between Žerotín Square and Veveří street, which is very important for traffic. The thesis is focusing on finding the right form, scale and functional content which would reflect the importance of the location, especially focusing on the Brno’s ring road that goes directly to Denisovy sady and accessibility of this city’s part. It also respects the design of the back side of the Red Church. The design uses the newly existing place as a location for new apartment building that reflects the scale of similar buildings in Marešov and other nearby streets and it also proposes administration building as an architectural solution for this location, which would be used as a seat for both municipal and national institutions.
|
|
|
The Roof Structure of a Multipurpose Sport Building
Michálek, Vojtěch ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The topic of the thesis is a project of roof of a multifunctional sport object with a ground-plan covering area 35x48m, and maximum height of 16m. This construction is projected for Brno and its surroundings. The project of roofing is evolved in two different variants. First one is formed by double-jointed arched latticed truss. Supporting components such as purlins, lateral and longitudal bracings, frontal column and anchorage are designed and assessed in static calculation. At the end of the thesis, comparison of both variants is elaborated. Design documentation, which consists of dispositional drawing, drawing of truss for manufacturing, drawing of indicative details and plan of anchorage, is a part of the thesis.
|
|
|
Fair Pavilion
Sengerová, Ingrid ; Sýkora, Karel (referee) ; Pilgr, Milan (advisor)
Diploma thesis is developed the design and static assessment supporting steel structure Exhibition Hall of the overall ground dimensions 47x66m with a maximum height of 15.4 meters. Layout is designed in accordance with architectural requirements. The design is considered for Brno´s area. The proposal of roof system is designed in two versions whose dimensions are identical. The first option consists of a two-aisle hall object, parabolic truss girder, pin supported on fixed columns. The second variant also two-aisle building with truss frame structure assessed in static calculation. At the end of the thesis, comparison of both variants is elaborated. Design documentation, which consist layout drawing, drawing of truss for manufacturing, drawing indicative details and plan of anchorage, is a part od thesis
|
|
|
Roof construction over scating ring
Pospíšilová, Lenka ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
This document describes the design of the roof structure for the dimensions of the rink. It was designed and evaluated three roofing solutions – steel truss structure, concrete arch with external prestress and prestress truss roof girder with concrete roof panel. One option was selected – prestress truss girder. This variant has been further developed. In the beginning was drafted several proposals geometry respecting the demands on the type of construction. Within the static calculation was created a mathematical model of the structure of the program Scia Engineer. Using this model were obtained values needed for the assessment of individual elements of construction and design assessment as a whole for the ultimate limit state and usability. According to the proposed geometry and opinions parts of the structure was drawing documentation structure as a whole and individual parts of the structure solved in this thesis. The last proposal was visualized structures together with the phases of the construction by program ArchiCAD and rendered by program Artlantis.
|
|
|
City within City
Rozsypal, Petr ; Bořecký, Petr (referee) ; Palaščák, Michal (advisor)
At present times, there are not many unutilized building sites near the city center, therefore it is necessary for the city to seek out such sites and prove their possible use. The bachelor thesis deals with such "unused" site in the area defined by three streets - from the north by Milady Horákové street, from the south by Francouzká street and from the east by Černopolní street. Each of these streets has a different character, the most different is Milady Horákové Street, which, despite its current form, has the potential and parameters to be an boulevard. The architectural design itself deals with the plot on the corner of Francouzská and Milady Horákové streets, and thus it follows the analytical part which came up with a suitable strategy for the development of this site by proposing a master plan.
|
|
|
City within City
Rozsypal, Petr ; Bořecký, Petr (referee) ; Palaščák, Michal (advisor)
At present times, there are not many unutilized building sites near the city center, therefore it is necessary for the city to seek out such sites and prove their possible use. The bachelor thesis deals with such "unused" site in the area defined by three streets - from the north by Milady Horákové street, from the south by Francouzká street and from the east by Černopolní street. Each of these streets has a different character, the most different is Milady Horákové Street, which, despite its current form, has the potential and parameters to be an boulevard. The architectural design itself deals with the plot on the corner of Francouzská and Milady Horákové streets, and thus it follows the analytical part which came up with a suitable strategy for the development of this site by proposing a master plan.
|
|
|
Hluková analýza v chovu dojnic ve vybraném podniku
DOBROVOLNÝ, Tomáš
In this bachelor thesis, especially in the theoretical part I focus on the construction of stalls and the technologies used in the dairy cows breeding. The next solved topic is welfare so as the last theme is the noise and its sources in the animal husbandries. The practical is focused on the description of the monitored stall unit. The noise level LpA measurement was done under the cattle load with the technological operations by the chosen dairy cows were observed in the workplaces of the agricultural cooperative in Velká Losenice. The results of measurements and comparisons in the chosen objects are introduced in the conclusion of this bachelor thesis.
|
|
|
Fair Pavilion
Sengerová, Ingrid ; Sýkora, Karel (referee) ; Pilgr, Milan (advisor)
Diploma thesis is developed the design and static assessment supporting steel structure Exhibition Hall of the overall ground dimensions 47x66m with a maximum height of 15.4 meters. Layout is designed in accordance with architectural requirements. The design is considered for Brno´s area. The proposal of roof system is designed in two versions whose dimensions are identical. The first option consists of a two-aisle hall object, parabolic truss girder, pin supported on fixed columns. The second variant also two-aisle building with truss frame structure assessed in static calculation. At the end of the thesis, comparison of both variants is elaborated. Design documentation, which consist layout drawing, drawing of truss for manufacturing, drawing indicative details and plan of anchorage, is a part od thesis
|
|
|
The Roof Structure of a Multipurpose Sport Building
Michálek, Vojtěch ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The topic of the thesis is a project of roof of a multifunctional sport object with a ground-plan covering area 35x48m, and maximum height of 16m. This construction is projected for Brno and its surroundings. The project of roofing is evolved in two different variants. First one is formed by double-jointed arched latticed truss. Supporting components such as purlins, lateral and longitudal bracings, frontal column and anchorage are designed and assessed in static calculation. At the end of the thesis, comparison of both variants is elaborated. Design documentation, which consists of dispositional drawing, drawing of truss for manufacturing, drawing of indicative details and plan of anchorage, is a part of the thesis.
|
|
|
Roof construction over scating ring
Pospíšilová, Lenka ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
This document describes the design of the roof structure for the dimensions of the rink. It was designed and evaluated three roofing solutions – steel truss structure, concrete arch with external prestress and prestress truss roof girder with concrete roof panel. One option was selected – prestress truss girder. This variant has been further developed. In the beginning was drafted several proposals geometry respecting the demands on the type of construction. Within the static calculation was created a mathematical model of the structure of the program Scia Engineer. Using this model were obtained values needed for the assessment of individual elements of construction and design assessment as a whole for the ultimate limit state and usability. According to the proposed geometry and opinions parts of the structure was drawing documentation structure as a whole and individual parts of the structure solved in this thesis. The last proposal was visualized structures together with the phases of the construction by program ArchiCAD and rendered by program Artlantis.
|
guest ::
