|
|
The Steel Structure of a Residential Building
Špeta, Václav ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The master's thesis deals with a project of the steel structure of a residential building. The building is thought like sevenfloor balcony-access house. The access balcony is situated in atrium in the middle of the building, which is roofed with a shell dome. The regular hexagon creates a ground plan of each floor. Every floor is turned 30 degrees compared to the next floors. The longest cross dimension is 43 m (axial). The height of the building is 30,4 m (including copula envelope). The final structure is chosen on the basis of optimization of the structural variants. The climatic load angle structure falls into the locality of the town Brno. The vertical supporting structure is made from steel-concrete accoupled circular section columns. The floor structure is designed from the steel rolled section I and H. These support assembly of a horizontal structure. Some joists and girder are designed like accoupled with a concrete floor slab. The copula above atrium is made from glue laminated timber ribs. Infill rods are from steel tube. The top ring of copula is designed from the rolled section UPE.
|
|
|
Restoration of masonry building
Hubený, Radim ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The final thesis is focused on restoration masonry building. Concretely assessment of resistance joist's floors, design alternative's strengthening and impact of surcharge on pronounces constructions. The choice one of alternatives strengthening, design and check of floor structure over the second floor.
|
|
|
Hall for Metal Production with Administrative Building
Kaňok, Vojtěch ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.
|
|
|
The Reconstruction of a Stell Structure two-storey Building.
Rapant, Jaromír ; Pilgr, Milan (referee) ; Buchta, Stanislav (advisor)
his thesis deals with exploration of paper mill building, structural load, and assessment of current load bearing structure and proposing reconstruction. Bearing structure is entirely made out of steel and it’s done as XYZ frame. The building is located in Olsany u Sumperka, this defines the climate. The paper mill is of a platform of 54,0 x 48,25 m. It’s a two floor building with average height of 13,22m. Thesis contains foto documentation of the building and tests of strength of the steel in the bearing structure. Small statistical calculation was done, of all current elements of the steel structure. And necessary reconstruction was based on these calculations.
|
|
|
Design of the Timber-Concrete Composite Ceiling Structure
Válek, Jakub ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The reconstruction of existing houses is currently a frequent issue. This work deals with the possibilities of reinforcing wooden ceilings with the focus on ceiling reinforcement using an over concrete slab. This suggested ceiling reconstruction work is desirable from the point of view of the rigidity of the object in the horizontal direction. The work includes the proposition for the composite, according to various norms and their comparison regarding the economic side of the design. The work further provides a description of the experiment, its preliminary results and its comparison with the theoretical calculation.
|
|
|
Business and office centre
Novotný, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
The aim of this master´s thesis was design and analysis of a steel supporting structure of a building for business and administration purposes in Ostrava. It includes an assessment of the main load-bearing construction elements and the selected connections. The thesis also contains the design documentation of the building and compares two different variants of the steel construction design.
|
|
|
Office Building
Poláček, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
Master's thesis is follow up with the disign of the load bearing structure of a office building. The building is designed for the area of Svitavy. The plan's dimension are 54,0 x 54,0 m. The objects has 10 floors. Load-bearing structure is disigned in two variants. In the variant A is centre to centre spacing 6m, in variant the B it si 9m. The coulomns and floor structure are composite steel-concrete. Thesis includes drawings.
|
|
|
Strengthening of the road bridge
Neděla, Lukáš ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
This thesis deals with the reconstruction of a road bridge with two simple fields over the river Olše in Třinec. The reconstruction of the bridge structure is designed in two versions, for which there is an executed design and assessment of a supporting structure according to applicable standards. The calculation of internal strenght is carried out by using the Scia Engineer 2016 program. This work contains a static calculation, a drawing documentation , an economical comparison of variants and visualization.
|
|
|
Production hall with administrative build-in structure
Šenk, Josef ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
My bachelor’s thesis contains design and assessment of steel structure of production hall with build-in administrative part located in Hrušovany u Brna. The dimensions of the ground plan are 12 x 50 m and the height of the structure is 9 m. The supporting structure consists of transverse frames. Distance of each transverse frame is 5 m. The frame structure is made of steel IPE profiles and is designed as a three-hinged frame. All frames are connected by longitudinal bracings. The spatial rigidity of the structure is provided by sway bracings. The dimensions of the ground plan of the build-in administrative part are 11 x 14,75m. The structure of ceiling is designed as steel-concrete composite structure. The steel structure of production hall and build-in administrative part is made of S235 steel.
|
|
|
Park garage
Šramota, Petr ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
The main aim of this master´s thesis is designing parking garage including access ramps situated in Ústí nad Labem. Dimensions of parking garage is 58,6x31,1 m. As a support system of construction are used steel-concrete composite elements. The calcuation was done by manual calcuation.
|
guest ::
