|
|
Digitally Controlled Switching Power Supply
Krška, Vlastimil ; Zamazal,, Michal (referee) ; Šebesta, Jiří (advisor)
This master’s thesis is an introduction to switching mode power supplies, especially focused on digital control. It summarizes the basic topologies of switching mode power supplies, and discusses the fundamental issues of digital power supply control. It also summarizes basic informations about Piccolo microcontrolers, about experimental kit and about main parts of sample source code. Also is described here own implementation of the control law and the theory and implementation of maximum power point tracking. The conclusion of this thesis deals with implemantation a testing of the designed digitally controled switching power supply.
|
|
|
Controllable decorative lighting system
Pelán, Pavel ; Matěj, Zdeněk (referee) ; Fedra, Zbyněk (advisor)
ecorative lighting strips could be used to the backlight of furniture, to creating a modern interior design. From an architectural point of view, this design is very difficult and requires a strong sense of aesthetics. More easier is to use the LED strips to the advertising trailers or to backlighting car parts. RGB strip will be powered by switching power supply with galvanic isolation. Colour will be changed by the combination of basic colours RGB, by using 3-channel PWM of Atmel microcontroller, controlled via a wireless module, providing two-way communication..
|
|
|
Design of switching-mode regulated power supply
Zelinková, Lenka ; Kováč,, Michal (referee) ; Brančík, Lubomír (advisor)
The thesis addresses the conceptual design and implementation of the switched-mode power supply having the adjustable dc voltage output up to 25V and current output up to 15A. The half-bridge topology is used for this supply. Design features and quantities are simulated in PSpice and Micro-Cap simulation tools. The thesis covers the simulation results, assembly data and the results measured on the implemented functional sample.
|
|
|
Two-quadrant switching current source for inductive loads
Húsek, Jan ; Chmelař, Milan (referee) ; Hanák, Pavel (advisor)
This master`s thesis deals with design and realization of two-quadrant switching current source for inductive loads. Output current adjustable range is 0 – 1A. Selected topology enables change of current direction. Current supply is made with TDA8920 integrated circuit. Thesis also contains basic information about switching supplies and coils.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
Switching Power Supply with Planar Transformer
Pawlas, Andrzej ; Vorel, Pavel (referee) ; Šebesta, Jiří (advisor)
This master's thesis describes the development of switching power supply with planar transformer. Deals with selection of a suitable integrated circuit together with the topology, a purchase of prototype for the reference measurements and debugging its own power supply. Further design and implementation of planar transformer and in the final implementation, debugging, and measurment's its own prototype. Power supply was fully functional and reached the expected parameters.
|
|
|
Microposition control device
Kokeš, Ondřej ; Bajer, Arnošt (referee) ; Kadlec, Jaroslav (advisor)
Presented thesis analyses a function of the particular type of the nanopositioner with aim to suggest and construct an electronic device suitable for control of the nanopositioner slider. In presented material there is a description of the control signals and possibility of their generating in the respect of slider movement accuracy. The main goal of the thesis is to describe electronic units ranging from power supply, control processor unit part to end part that directly joint nanopositioner. There is also programme equipment for microcontroller and computer, communication description, movement measuring and calibration and draft for the close-up of the control loop for additional increase of the movement accuracy.
|
|
|
Auxiliary inverters for electric traction
Polášek, Petr ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
This thesis concerns with specified problems of an electric traction. It deals with the concept of module controlling EC motor of the voltage 24V and the current 100A. There are described possibilities and principles of controlling EC motor in detail. For controlling, the single-purpose IO MC33035, which is directly specified for it, is used. The thesis describes implementation of both testing and final versions of converter for a circulating pump drive of a cooling circuit in locomotives. The convertor is partly universal and can be used in other applications. According to the implemented convertor, a laboratory test and a model protocol were made. In the second part, the concept is described as well as the implementation of DC/DC conventor of output voltage of 24V and which is supplied by 12V battery. The specified output current is 4A. It is used for supplying of the controlling traction vehicle unit and is installed as a boost convertor which contains a resonance conventor. The presentation of measured parameters of the complete convertor is either a part of this thesis.
|
|
|
Passive PFC filters for SMPS
Matejov, Michal ; Červinka, Dalibor (referee) ; Drápela, Jiří (advisor)
This work deals with theory of switched power sources. There is description of the ways for connection and their practice purposes. In the next parts there are defined requirements on input supply circuit for these sources, especially for the form of output current. There are mentioned the basic connecting methods of PFC circuits and these methods modify the output current to meet the requirements of specification ČSN EN 61000- 3- 2. In the next parts there are shown simulations of PFC circuits made by Pspice application. Further is the basic description of sources construction for the sources which were used for testing and measuring. The final part deals with evaluation of the measuring on the chosen computer’s source. It compares between the manufacturer’s solutions and PFC circuit made by ourselves.
|
guest ::
