|
|
Comparative simulation of the skylights
Dvořáček, Jakub ; Motyčka, Martin (referee) ; Nekvapil, Jan (advisor)
The thesis deals with simulations of daylight transmission through skylights and detection of differences in results in variance simulation softwares. The aim of this work was to find out if the simulation programs calculate the same results for the same parametric situation. The skylights were simulated in TracePro, Holigilm and Tube Eff Tool. The results were always different. In results appeared tendency reducing of differencies caused lenghtening of skylight route.
|
|
|
Completion of the BUT - Faculty of Fine Arts
Jelínková, Barbora ; Navrátil,, Aleš (referee) ; Nový, Alois (advisor)
The theme of the thesis is a study of the project of the Faculty of Fine Arts in Brno. Preparatory work has dealt whole complex, including faculty of Forensic Engineering and common areas for both faculty. Thesis follows up only study of FFA and common facilities. There are public garages in three underground levels as a compensation for the abolition of the existing parking on the property. Urban and mass solution creates a complex of buildings with a city-forming character and allows going throw the area. There are applying principles of double hanging facade on the building, which allows original artistic design of buildings.
|
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Office Building
Marek, Václav ; Ostrý, Milan (referee) ; Struhala, Karel (advisor)
The thesis describes design of an L-shaped two-storey office building in Chotěboř, which can work with saving energy and be careful to nature. Using renewable materials and new technical equipments. At the end of the design, there should be a building that will be architecturally interesting, energy-efficient and use renewable resources. It is a two-storey building, which is designed for office working and one part of building can be used for teaching science. Main roof on administration part has saddle shape, second roof on part which science centre has flat roof. Both roofs are intensive green roof overgrown with plants. For day illumination, there are design French windows with openings parts. Most of the first floor and the whole second floor belongs to offices and auxiliary staff rooms, toilets, etc. First floor also includes a small training centre with one classroom and necessary facilities (toilet, staff room, etc.). The load-bearing structures (foundations, walls, columns, floor and roof slabs, etc.) are designed from cast-in-place reinforced concrete. Load bearing vertical elements are walls, columns, and posts. Part of the first floor exceeding the layout of the second floor is covered with a flat green roof. Second floor is covered with a saddle green roof. All drawings and 3D rendering were done using ArchiCAD software.
|
|
|
The Students themselves - Student Center Poříčí
Mikitová, Karolína ; Novák, Antonín (referee) ; Kratochvíl, Jan (advisor)
The subject of this work is urban and architectural design of the building corner parcel on the river Svratka in Brno. An object of the function dorm and canteen. The concept is based on a compact mass using a parcel of land, which is associated with a sizable building program. Unusual form of skewed input in response to the student center open to the street. He will highlight the position of the corner and create an iconic element to identify with the building.
|
|
|
Area for Breeding Horses
Floriánová, Jitka ; Klimek, Karel (referee) ; Myslín, Jiří (advisor) ; Skála, Jiří (advisor)
The aim of this project was to design a new hippocentre in the locality of Lipůvka – Jihomoravský kraj. The building site is situated in a sloping terrain, on a meadow out of the built-up area of the village. The principle of this draft lies in a division of various functions to the separated objects, connected by inner and outer ways. The object is functionally divided into five parts – hall of an inner riding-school (partially imbedded into the terrain), with added objects of keeper’s/owner’s housing, restaurant and a club room with a kitchen and other service rooms, and accomodation part for guests. Higher in the terrain we can find horse stables with integrated service rooms- such as feed storage, changing rooms for the users, and showers for the horses. One of the most important requirements of this project was also to create a functional complex though the significant cant in the elevation across the length of the given area. Thus, the stable buildings have inside two different floor levels to compensate it. The hall of a riding-school is lighted by skylights in its roof, which also provide indirect lighting to the rooms in the western part of the three added blocks. In this bachelor thesis, only the buildings for accomodation and dwelling of people are being further designed and documented.
|
|
|
Auto center VW Mikulov
Kováčik, Branislav ; Bílek, Zdeněk (referee) ; Dýr, Petr (advisor)
The aim of this bachelor's thesis was to create documentation for a building permit and documentation for the construction of a building, the basic compositional and architectural design of which is based on a previously processed architectural study within the subject AG033 - Atelier of production buildings. This is a design project of the Volkswagen Group Autocentre in Mikulov. The specified land intended for development is located in the westernmost part of the town of Mikulov in the cadastral territory of the town of Mikulov, it is an industrial zone of the town. The surrounding buildings are largely made up of low-rise large-scale buildings, production halls, storage facilities or agricultural buildings and their accessories. Within the zoning plan, the area adjacent from the south side to Jiráskova Street is listed as a brownfield. The shape of the land predetermines the proposed construction of the longitudinal shape of a deep character, as the land is stretched in the north - south direction and has the shape of a gradually narrowing trapezoid. The terrain is slightly sloping and descends to the south. From the south side, a wastewater treatment plant is adjacent to the solved area. The bachelor's thesis also deals with the solution of the external modifications of the area, including transport infrastructure, stratification and the number of parking spaces. An essential part is also the distribution and character of the upper and lower greenery, the location and shape of the areas intended for demonstration vehicles. Last but not least, the work deals with the solution of engineering networks within the technical equipment of buildings and technical infrastructure, management of waste, etc. The proposed building respects the floor plan delimitation of the land, primarily by maintaining the parallelism of the perimeter walls with these boundaries. The central element of the mass composition is an extravagantly designed ellipse used as the main exhibition space, opened by a large-area rounded glazing into the entrance area of the exterior. The remaining masses of the building are formed by blocks of different height levels, which achieves the compositional principle of gradation. The completely monotonous mass of the production hall is broken in each field by a massive skylight encircling the building along the entire perimeter of its section. The building has premises for warehousing, administrative activities, exhibition premises, technical facilities and premises belonging to professional workplaces of car mechanics. All material segments of the building are interconnected by internal passages. The whole building has a purely industrial character, which is based on the character and purpose of use of the building and has a connection with the automotive industry. The main materials used in the construction of this building are structural steel, concrete and thermal insulation perimeter panels. The façade emphasizes the essence of the ellipse, which is largely-glazed, while the storage and production areas are hidden in the rear and their visual layer is formed by sheet metal in gray, respectively. white color.
|
|
|
STU Innovation Center in Bratislava
Dvorská, Mária ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor) ; Hradil, Dušan (advisor)
The aim of the bachelor's thesis was to create documentation for the building permit and part of the documentation for the construction. The work follows the architectural study, which was developed in the subject AG35 - Atelier of public buildings. The theme of the studio work was the Campus STU Competition by Inspireli. The main idea of the idea competition was to design a representative center of the Slovak University of Technology in Bratislava. The project includes the innovative STU science center, educational, social, multi-purpose and leisure spaces both indoors and outdoors and part of the rectory's workplaces. The Innovation Center serves students, pedagogues, researchers and employees of STU, as well as experts from practice, self-government and the public. The campus creates conditions for the interaction of the academic environment with practice and is an important communication space towards the public. This is helped by the opening of the complex and its connection with the main public spaces of the city. I designed a concept called "STUdents city", a city that has imaginary boundaries, while being open to the public, a city where students can find everything they need and can take it for them. During the new construction of the campus, I respond to the surrounding faculty buildings and the context of the place, and to make it open to the faculties materially and conceptually, and at the same time not to disturb them with its substance. I solved the problem of lack of light of the inner block by the potential of the sloping plot and by placing certain objects in the newly created terrain break, at the same time I ensured the supply of natural light and fresh air by means of atriums and skylights. When designing, I took into account the flexibility and variability of interior or exterior use. It was also important for me to use new technologies in the design for the technical school, such as facade glass that is environmentally frien
|
|
|
New building for habitation with surgery
Hlaváček, Jiří ; Ing.Radek Sedlák (referee) ; Benešová, Romana (advisor)
The project addresses new building for habitation with surgery in Chotebor cadastral municipality, county Brod. House is a ground floor with residential loft and garage. Floor plan of the house is approximately T-shaped. Gabled roof is designed with a slope of 30 with Tondach clay tiles, roof is modern Ring beam. External walls are of brick blocks designed Heluz. The house is designed with regard to layout, safety in use, ensuring the construction of a static page, fire safety and energy savings.
|
|
|
Private house with ordination
Kyceltová, Lucie ; Špás, Luděk (referee) ; Daněk, Lukáš (advisor)
The theme of this work is building solutions for residential new construction house in Vrchlabi. The family house is also designed medical office. The family house is located one floor and attic. Ground object consists of two rectangles, which divides the layout and operation of housing and employment, including part of the surgery. Roofing made a pitched roof and flat roof over part of the vegetation plan. The house is equipped with a slightly sloping plot in a quiet family houses. All habitable rooms are naturally ventilated and illuminated. The supporting structure consists of a system Liapor. The cladding is insulated contact insulation. The facade is simply divided in accordance with the large glass window openings.
|
guest ::
