|
|
Fittings of heating systems
Klus, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.
|
|
|
Adjustment of diagnostic instrument Array Reader C-series
Čičatka, Michal ; Hesko, Branislav (referee) ; Mézl, Martin (advisor)
Thesis deals with actualization of application for adjustment of the chemical analyser Array Reader C-series developed by company BioVendor. At the beginning it defines and sorts out chemical analysers; then describes their physical principles. Following chapters sum up knowledge about microarray analysis and describes it’s chemical and physical principles. Furthermore, the thesis deals with quality and it’s management and machine adjustment. In the thesis is also mentioned .NET Framework – software platform that will be used in the practical part of the thesis. At the end of the theoretical part is described Array Reader C-series. Practical part documents current application for adjusting the analyser. Based on personal experiences with the adjusting application was created and thoroughly described concept of a new adjusting application. Main task of this new concept should be simplification and automatization of the adjusting process. After that implementation of the new concept is described including automatation processes. In the end of this thesis both original and new versions are compared with regards to time consumption and user experience. Newer version of the application was evaluted as better than it's previous version in light of time consumption and user experience. Application was expanded for fluorescent analyzer and for both types of analyzers were developed derivated applications for service adjustment. Each of these applications was implemented to the software of BioVendor company and is used on daily basis.
|
|
|
The motorcycle diagnostic unit
Smola, Tomáš ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
This thesis deals with problematics of air/fuel mixture diagnosis od older carburetor motors. Especially for motors with more than one cylinder. In this thesis are informations about commercial product for diagnosis, brief informations about function of CV caburetor and best setup of fuel mixture. The next step in this thesis will be design, construction and testing of device for the diagnosis air/fuel mixture in practical use. Device will be able to measure mixture and other values witch can be used for best carburetor setup.
|
|
|
Functional failures dependance to measuring system of assembly lines DRV 2.
Barták, Pavel ; Pernikář, Jiří (referee) ; Zemčík, Oskar (advisor)
The Bachelor thesis is focused on assembly of pressure regulation valve (DRV) which is part of injection system Common Rail produced in company Bosch Diesel s.r.o. The purpose of this thesis is to consider the possibilities of assembly process effects, components for failures when functionally checked and suggestion of solution to minimize them. After practical part there was focused on assembly process to get necessary data. On the base of these data direction of analysis was followed, as the measurement of claimed components in Bosch Diesel laboratories. After the evaluation the countermeasures were proposed which some of them were implemented in production and subsequently analysed.
|
|
|
Construction of Violin and Václav Lance Personality
Vojta, Pavel ; Tomášek, Jiří (advisor) ; Perglerová, Marka (referee)
The first theme which I focus on, is the life and work of the violin maker Václav Lanc. I explain his theories and methods of the violin building and setting up. I also approximate the luthiers craft and details of the string instruments construction. Then I write about the development of violin making in the Czech republic and also in the World and I emphasize the historical consequences. Finally I deal with the string musical instruments which are used at the basic music schools. The purpose is to minimize the problems, which teachers and pupils have with the daily maintenance and with setting up of the violin. At the end, for the youngest pupils, I dedicate the "Ten commandments" - How they should to look after their musical instruments. Keywords The building, the set up, the defects.
|
|
|
Renovační technologie historických vozidel
Šimoník, Jiří
The thesis „Renovation technology of historical vehicles“ is focused on the problematic of general repairs of historical vehicles and renovation of old vehicles and its components. The first part describes possible surface finishes of the components of historical vehicle and current methods of its renovation. Further the thesis describes possible repairs and adjustments of serial two-stroke and four-stroke motorcycle engines with focus on Czechoslovakian historical motorcycles. In the following part is described the procedure of general repair of the motorcycle ČZ 125/473 SPORT. In this part are renovation technologies from the previous part of the thesis applied to practice and are described possible risks of used methods.
|
|
|
Adjustment of diagnostic instrument Array Reader C-series
Čičatka, Michal ; Hesko, Branislav (referee) ; Mézl, Martin (advisor)
Thesis deals with actualization of application for adjustment of the chemical analyser Array Reader C-series developed by company BioVendor. At the beginning it defines and sorts out chemical analysers; then describes their physical principles. Following chapters sum up knowledge about microarray analysis and describes it’s chemical and physical principles. Furthermore, the thesis deals with quality and it’s management and machine adjustment. In the thesis is also mentioned .NET Framework – software platform that will be used in the practical part of the thesis. At the end of the theoretical part is described Array Reader C-series. Practical part documents current application for adjusting the analyser. Based on personal experiences with the adjusting application was created and thoroughly described concept of a new adjusting application. Main task of this new concept should be simplification and automatization of the adjusting process. After that implementation of the new concept is described including automatation processes. In the end of this thesis both original and new versions are compared with regards to time consumption and user experience. Newer version of the application was evaluted as better than it's previous version in light of time consumption and user experience. Application was expanded for fluorescent analyzer and for both types of analyzers were developed derivated applications for service adjustment. Each of these applications was implemented to the software of BioVendor company and is used on daily basis.
|
|
|
The motorcycle diagnostic unit
Smola, Tomáš ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
This thesis deals with problematics of air/fuel mixture diagnosis od older carburetor motors. Especially for motors with more than one cylinder. In this thesis are informations about commercial product for diagnosis, brief informations about function of CV caburetor and best setup of fuel mixture. The next step in this thesis will be design, construction and testing of device for the diagnosis air/fuel mixture in practical use. Device will be able to measure mixture and other values witch can be used for best carburetor setup.
|
|
|
Fittings of heating systems
Klus, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The theme of this diploma thesis is fittings of heating systems and it is divided into three parts. The first part deals with this topic on theoretical level. In the second part, there is a calculations and drawings that deals with heating and water heating of the apartment building in Uherské Hradiště. This part is solved in two variants concerning hydraulic balancing and regulation of the heating system. The last part of the thesis is an experimental solution and processing of pressure loss results of selected valves. These results are compared with the values reported by the manufactures of the valve.
|
|
|
Construction of Violin and Václav Lance Personality
Vojta, Pavel ; Tomášek, Jiří (advisor) ; Perglerová, Marka (referee)
The first theme which I focus on, is the life and work of the violin maker Václav Lanc. I explain his theories and methods of the violin building and setting up. I also approximate the luthiers craft and details of the string instruments construction. Then I write about the development of violin making in the Czech republic and also in the World and I emphasize the historical consequences. Finally I deal with the string musical instruments which are used at the basic music schools. The purpose is to minimize the problems, which teachers and pupils have with the daily maintenance and with setting up of the violin. At the end, for the youngest pupils, I dedicate the "Ten commandments" - How they should to look after their musical instruments. Keywords The building, the set up, the defects.
|
guest ::
