|
|
Detached house in sloped terrain
Chludilová, Alice ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of my bachelor's thesis is design documentation of a detached family house on a steep slope located in a city district Brno - Nový Lískovec. The house is designed as a three-storey building with one underground floor and two above-the-ground floors, roofed with a flat green roof that merges with the surrounding terrain. The structural system of the building is designed as masonry, the walls are built of clay Porotherm blocks and permanent formwork. Thermal insulation of the external walls is provided by ETICS. Ceiling construction consists of POT beams and ceramic insets MIAKO. The house is funcitionally divided into three parts on three different floors. Technical facilities are located on the underground floor, that consists of a garage, a boiler room, a laundry room and storage space. The first ground floor serves as common space, there can be found a large living room with kitchen and a guest room across the main hall. A private part of the house is on the second floor, there are only bedrooms. Each room is visually connected to the exterior through large french windows and HS portals.
|
|
|
Pension Skalka-building and technological project
Patočka, Bronislav ; Štěrba, Martin (referee) ; Henková, Svatava (advisor)
This master´s thesis solves the building and technological project of a new guest house building in the village Skalka u Prostějova. It is a detached building made of brick masonry. The project contains the building of guest house and gabion retaining wall with parking place. Thesis is comprised of, inter alia, technological sketch of the main phases of building, time and financial plan, site facilities project, machinery proposal, budgets, technological rules and inspection and test plan.
|
|
| |
|
|
The Abutment Design of the Road Bridge over the Highway D1 by Kurovice
Ponížil, Cyril ; Fiala, Radek (referee) ; Brdečková, Helena (advisor)
The bachelor’s thesis deals with design and assessment of the bridge abutment of the flyover over highway R 55 Skalka – Hulín. This flyover is situated between Tlumacovice and Kurovice. The thesis includes a geological and geomorphological classification of the locality, definition of loads due to bridge constructions, including traffic loads. Design and assessment of two variants (the gravity and cantilever retaining wall) of the bridge abutment are carried out.
|
|
|
Retaining Walls
Michalčák, Jan ; Fiala, Radek (referee) ; Glisníková, Věra (advisor)
This bachelor thesis deals with retaining walls, methods of the design and defects. The thesis then focuses on gebion retaning walls and their defects. The adopted design of the model of gabion for the calculation through final element method (FEM) is here processed and verified. In the practical part findings are applied to a real situation along a cycle path near the village called Tatranská Polianka. The designed retaining wall from gabion baskets is calculated analytically, using the programme GEO5 and PLAXIS 2D. In conclusion, results are evaluated and compared.
|
|
| |
|
|
House and winery in Zaječí
Tomková, Denisa ; Polášek, Josef (referee) ; Müller, Jan (advisor)
The bachelor's thesis deals with the proposal of a new house intended for permanent living of a family of four and at the same time for the production and storage of wine. The building is located in a sloping terrain in the cadastral area of the village Zaječí and consists of a basement and one above-ground floor. It includes a vaulted cellar for archiving wine, an outdoor terrace and a covered parking space. The proposal of the house is adapted so that the well-being of family members is not disturbed by the planned wine production. This is achieved by the fact that the basement floor is intended for the operation of the winery, and on the contrary, the quiet and social zone, which is the zone intended for living, is designed on the above-ground floor. The main load-bearing system of the basement are concrete blocks made of lost formwork and ceramic bricks from the Heluz system on the 1st floor. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The living room has a wooden, beamed ceiling and in the rest of the building is designed a reinforced concrete ceiling slab. The roof is flat, in 2 height levels and with a slope of 3%. The design of the house includes an internal recuperation unit, underfloor heating and an external three-layer stainless steel Schiedel chimney system. The work is processed in the form of project documentation adapted for the construction with almost zero energy consumption.
|
|
|
Family House on the Slope
Chromíková, Kristýna ; Struhala, Karel (referee) ; Košíčková, Ivana (advisor)
The aim of the bachelor's thesis is to process the project documentation of a family house in a sloping terrain, which is located in the built-up area of the city of Brno, on the outskirts of the city, Jehnice. It is about detached family house opening to the southwest into the sunny part of the residential gardens. To the street is a ground floor house with a residential attic, a gabled roof with a parallel ridge with local roads. The individual floors recede in accordance with the sloping land and in each floor ensures a direct contact of the interior with the exterior, in the underground floor, by the terraced arrangement of the house direct access from the pool and lounge to the garden, on the main living floor on the ground floor connecting the living space with a glass wall with a terrace and a staircase with the garden, in the attic is from the terrace in the southern half of the house, thanks to the location of the building at the top of the slope, offered a view of the countryside and forests in the vicinity. The house has three floors, the underground floor is adjacent to the road, the garden is due to the slope terrain open. Service areas and residential gardens are oriented to the north side of the street rooms. In the attic there is a garage for 3 cars and then also a carport on the road. Furthermore, technical facilities, cloakroom, gym with facilities, lounge and part with swimming pool, sauna and social facilities. Before the common room is a covered terrace. The second residential unit is located on the 2nd floor. From a construction point of view, the street is longitudinal double track, to the street facilities and service areas and to the garden living rooms and social facilities. The house will be built using classic technology from ceramic fittings and reinforced concrete horizontal constructions. 1st floor includes a residential unit 4 + kk with a living room with kitchenette and facilities garden, 3 bedrooms and two bathrooms
|
|
|
Familly House
Pourová, Veronika ; Blažek, Petr (referee) ; Čuprová, Danuše (advisor)
The theme of bachelor´s thesis is family house in Miletin. The family house is a single unit building intended for the permanent family living. It is a family house with two floors and basement. Family house is set in a slinty sloping terrain. The building was constructed using traditional materials and technologies. The building is designed of system POROTHERM and ceiling construction of system POROTHERM MIAKO. The cladding is insulated by contact insulation. Facades are broken color in combination with a large glass window openings. The windows are plastic with insulating glass. The roofs are flat.
|
|
| |
guest ::
