|
| |
|
|
Construction technological project of administration building Gaceta in Prague
Jekielek, Marek ; Pražáková, Jana (referee) ; Diaz, Yvetta (advisor)
The objective of this thesis is the technological project of the structural construction of administrative building. It includes technological standards for reinforced concrete ceiling and for face layer of ventilated facade, the project of site construction, detailed structural, financial and time schedules of building object, controlling plans and test plans of the reinforced concrete skeleton and for face layer of ventilated facade from face brick, plan of main mechanical assemblies and costing of budget for structural.
|
|
|
Technological Solution of a Gross Superstructure of the Apartment Building in Brno
Drozd, Michal ; Hejl, Martin (referee) ; Mohapl, Martin (advisor)
This bachelor´s thesis is focused on the construction technological project of a gross superstructure of the apartment building in Brno. It is a four-storey building made of bricks with cast-in-place floor structures. The building is roofed with a timber roof truss. The thesis includes a technical report, bill of quantities, technological methods of construction, technical report of a site equipment, machine draft report, inspection and test plan, work safety and finally comparing of different ways of concreting.
|
|
| |
|
|
Building survey and evaluating the state construction
Nguyen, Martin ; Komárková, Tereza (referee) ; Heřmánková, Věra (advisor)
This diploma thesis deal with the building survey and evaluating the state of existing constructions. In theoretical part are described the types of civil engineering surveys and diagnostic methods for conducting a survey of reinforced concrete structures. The practical part deal with describes the structural and technical survey of the production hall in the industrial area Fatra Napajedla, evaluating the strength of concrete on the existing structure through donations cores and verification of compliance with the reinforcement according to project documentation. The last part is focused on a static assessment of selected supporting elements of the structure.
|
|
|
Static analysis of reinforced concrete roofing of platform
Popovič, Tomáš ; Strnad, Jiří (referee) ; Zich, Miloš (advisor)
The thesis deals with the static solution of reinforced concrete roofing of bus platform. It is a monolithic reinforced concrete frame structure, which is consisting of circular pillar and girder. The girder has the general shape. The board is double-sided embedded into girder. The loads acting on the construction are transmitted to the foundation soil using reinforced concrete foundation blocks. The content of this thesis is based on the dimensioning of individual elements of the support structure according to ČSN EN 1992-1-1. These elements are dimensioned for the ultimate limit state. The main outputs of this static calculation are drawings of shape and drawings of reinforcement.
|
|
|
Apartment building in Znojmo
Trčková, Michaela ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The aim of this bachelor thesis is a project documentation of the construction of an apartment building in Znojmo. The designed building is three-storey with partial basement. It has approximately rectangular floor plan of 40 x 12.5 m. The structural system of the building is designed from monolithic reinforced concrete in the permanent thermal insulation formwork Velox. The last floor is covered with a flat roof. The structure offers 12 dwellings. There is also a parking lot and large garden that belong to the flat owners.
|
|
|
Concrete flat slab supported by columns
Macháček, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of this bachelor’s thesis is a structural design of a reinforced concrete point-supported slab for the second floor construction of a hospital. Software RFEM was used for modeling of internal forces, the results were verified by equivalent frame method and moment coefficient method. According to the RFEM results a tension reinforcement and slab shear reinforcement were designed. The deflection was manually calculated. Afterwards, a reinforcement drawing was made. The calculations correspond with ČSN EN 1992-1-1 a ČSN 73 1201.
|
|
|
Reinfoced concrete bridge over the Budišovka river
Sehnalová, Markéta ; Požár, Michal (referee) ; Koláček, Jan (advisor)
The aim of the bachelor thesis is the design of a single-span reinforced concrete slab bridge. Two variants of cross-section of the bridge were considered – rectangular and trapezoid. The rectangular one was chosen for further design. The wall-slab model was created using calculation software Scia Engineer 16.1. The structure is supported by pot bearings.
|
|
|
Slab bridge in Frýdlant
Vozdová, Klára ; Hochman, Dominik (referee) ; Panáček, Josef (advisor)
The subject of bachelor’s thesis is to design a new one-span bridge construction across creek Řasnice in Frýdlant. Construction is proposed in three variants. For detailed design and assessment was chosen reinforced concrete slab. Calculation of load effects was performed using the computer program Scia Engineer and compared with the manual method of co-latitude records. The construction is designed according to current standards.
|
guest ::
