|
| |
|
|
Brno - damlake
Rehortová, Veronika ; Žalmanová,, Petra (referee) ; Šindlar, Jiljí (advisor) ; Pěnčík, Jan (advisor)
Multi-purpose building is located in the South creek Brno-damlake. On one side is surrounded by a damlake, from the other side grow greenery. Two stand-alone units (cafe and amphitheater) were connected with ramp, which corresponds to the original paths and brings a new perspective. Continuously straight ramp connects to a cafe and another part goes in the amphitheater. Also, it connects seamlessly with the prospect, which is located above the café. Café just out from the ramp above the water-level, the emphasis is achieved with the logo entry in corten-wall. The kardinality of the amphitheater is suppressed slightly sunken below the water surface. The water surface flows over the edge and has a relaxing effect. The amphitheater is variable and is freely accessible. Building Compact and creates a smooth transition between the damlake and shore.
|
|
|
Sport Centre Královo Pole
Kouřilová, Monika ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
Design of building is one solitaire two-floors object. The main purpose of design was effort to conect all required functions. The shape of the building is derived from the shape of the rink. The total mass consists of two rounded raising shapes which are indented. The first shape represents the inner side of the rink which starts with an access ramp and ends with the final terrace at a café. The second shape copies the first one with the fact that it is increased for one floor from the very beginning of rising. The building is situated in the northwest side, which is the most visible side from the access communication. The entire building is covered in perforated sheet coat. Moreover, the coat graphically illustrates stylized crystals of water - ice. This page therefore demonstrates the secret of the shape, height and colour of the object.
|
|
|
A Municipal Apartment Building
Lušovský, Lukáš ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this bachelor thesis is a new building of a four-storey non-blocked apartment building in Jeseník nad Odrou. The apartment building consists of five residential units with a garage and common rooms. The whole object is then covered with a cold roof. The main entrance to the building is located on the northeast side of the building at the 1st floor level. The main living rooms are oriented on energy-efficient sides. The vertical constructions are made mainly of Porotherm ceramic system components. Ceiling structures are designed as prefamily filigree. Stairs are monolithic reinforced concrete. The project was processed using the AutoCAD software.
|
|
|
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
|
|
|
Ramps and other devices for the entrance of handicapped to the buses
Pavlo, Matej ; Nohál, Libor (referee) ; Mazal, Pavel (advisor)
The bachelor work brings the critical assessment of the construction solutions of the aids for boarding of the physically handicapped persons in the busses of the municipal mass transportation and at the same time it deals with design of some tipping ramp variants, which try to improve the faults of the present ramps. The first part contains the review of the present situation of the aids for boarding and entrance of the physically handicapped persons. The second part contains the designs of the construction solutions, which could be of use in the busses of the municipal mass transportation. And in the last part are these designs reviewed and compared each other.
|
|
|
Semi-Detached House with the Barrier - Free Access
Hornychová, Michaela ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
The subject of Bachelor’s thesis is new building semi-detached barrier-free house. The house is in a secluded and located in a slightly sloping terrain in the village Babice nad Svitavou. The building is without basement, has two aboveground floor. The building's layout and operationally divided into two apartments for 3-4 members, of which first aboveground floor is for the family of a person in a wheelchair and second aboveground floor is designed for a family with a person walking on crutches. In the building in first aboveground floor there is a double garage, above which is a single-shell flat roof walkway - terrace. Above the second aboveground floor is a single-shell flat roof not walkaway. The building is of brick from construction system POROTHERM; the ceilings are made ceiling inserts MIAKO and ceramic-concrete beams POT with monolithic. Access to the building for a person in a wheelchair is barrier-free.
|
|
| |
|
|
Bridge on a ramp
Otevřel, Rostislav ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Thesis describes the design and assessment of a plan view of a curved road bridge, which is a part of an elevated crossing transferring directional divided communication and tram line of public transport in Brno. There are four variants of cross sections designed, from which is selected bicameral cross section with arched angled bottom plate, which should be aesthetically pleasant to impress in an urban environment. Static calculation is processed and design is assessed by current European standards. Then clear and detailed drawings, the process of construction and visualization of the bridge are processed.
|
|
|
Bridge on a ramp in Brno
Diviš, Dalibor ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Thesis involves designing and analysis of horizontally curved bridge contruction with chamber-shaped profile and oblique side walls. The object is a part of fly-over crossig at VMO Brno. Calculations are according to actually valid standards ( Eurocodes ). Thesis gives a basic look at the problematics of horizontaly curved bridge construction, including solution of prestressing cables´ 3D-tracking with usage of common software.
|
guest ::
