|
|
Detached house with a design office
Bednář, Jiří ; Ing.Tomáš Brückner (referee) ; Kacálek, Petr (advisor)
The aim of my bachelor thesis is a project of a new detached house with a shop at a level of the documentation for the structure realization. The building is partly basement with two above-ground floor and a flat roof. The structural system of the basement part is made up of permanent shuttering and the above-ground part is made up of timber frame. The project of the building is in accordance with the development plan of Příbor and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.
|
|
|
One span frame bridge
Buk, Petr ; Zich, Miloš (referee) ; Nečas, Radim (advisor)
The subject of this bachelor thesis is design of road bridge across the river. From the developed variants, one was selected. Selected variant deals with one span frame bridge. Construction is made of panel with run-ups from prestressed reinforced concrete. Bridge is designed perpendicular, with span range of 25,0 m. For the calculation of internal forces two computing models (rod and panel model) were made in SCIA Engineer 2018 program. Thesis deals with comparisons of internal forces in rod and panel model and comparison of short-term losses with SCIA Engineer 2018 program. Design and assesment of ultimate limit state and ultimate serviceability state was conducted in accordance with applicable standarts and regulations.
|
|
|
Rigid frame road bridge
Pohlídal, Jan ; Zich, Miloš (referee) ; Nečas, Radim (advisor)
The theme of this bachelor thesis is to design a road bridge across a river. The bridge is designed as a single-span frame structure. The soffit is unique by its parabolic course. The load effects were calculated using software Scia Engineer. Calculations by hand were carried out using MS Excel. Drawing documentation and visualization of the structure are also included.
|
|
|
Guest House in Brno
Budina, Martin ; jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The purpose of this thesis is to present the static design of chosen parts of the supporting structure of Guest House in Brno. Part of the building is located below ground level, therefore the supporting structure is made of monolithic reinforced concrete frames holding the reinforced concrete slab. Above ground level the supporting structure is made of masonry construction with folded ceiling. Drawing documentation is included.
|
|
|
Design of the single span bridge accros the road I/53
Hučík, Jan ; Olšák, Martin (referee) ; Klusáček, Ladislav (advisor)
The aim of this bachelor thesis is the design and analysis of bridge across the road. Three variants were designed. The structure was designed as a one-span frame bridge with a parabolic haunch with of span range of 35,1 m. The calculation of load efects eas made in software Scia Engineer. Both design and relevant drawing documentation of the bridge deck and pillar.
|
|
|
Departure hall
Čepl, Marek ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
Bachelor thesis focuses on the design of a steel Prague airport departure hall with dimensions of 70 x 40 meters and a construction height of 9,6 meters. The main components of the construction are steel frames with truss girders in a characteristic "wave" shape connected to the main truss columns in the center of the hall span. Steel frames are supplemented by side columns made from section steel profiles connected to the main girders by joints. All of the columns are hinge-connected in their anchoring. Each lateral steel frame is 5 meters apart and the overall stiffness is secured by bracings effective in compression.
|
|
|
Timber Detached House
Kozel, Tomáš ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
The aim of the bachelor thesis was to design a detached house with a garage. The building is solved as a frame construction. The detached house is roofed partly by a flat roof and partly by a hounch roof. When designing the object the accent of its funcionality was emhasized and the proposition of the energetically economic object.
|
|
|
Static analysis of precast hall
Juda, Jan ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
This bachelor thesis is focused on static solution of precast reinforced concrete. Specifically, the cross-sectional connection of the hall, which consists of square columns and a pre-prestressed I-profile truss, is solved here. The load on the structure is transferred to the subsoil by reinforced concrete pavements, which have not been solved in the bachelor thesis. The content of bachelor thesis is based on the dimensioning of individual elements of the transverse bond according to ČSN EN 1992-1-1. These elements are dimensioned to the ultimate load condition. Drawings of the structure, shapes and reinforcement of individual parts are processed in the drawing part.
|
|
|
County library in Havlíčkův Brod
Sommer, Miroslav ; Röder, Václav (referee) ; Šmak, Milan (advisor)
The work is treated as a steel construction multi-storey buildings in the county library Havlickuv Brod. At design requirements were respected in shape and layout of the building. The complex consists of three parts - two, four and five floors. The overall footprint is about 85 x 32 m. The proposal is designed as a composite steel and concrete slab. Pent roof construction is inclined 5 degrees. Anchors are designed as joint. Horizontal forces on the design of frames are transmitted in both directions.
|
|
|
Timber Frame House
Juhászová, Michaela ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
This bachelor’s thesis deals with design of a timber frame house situated in the cadastral area Čechovice u Prostějova, region Prostějov. It is a detached house standing in existing resident area. It is designed for a family of four. The house has two storeys and inbuilt garage. There is the shed roof. It is designed as a timber frame construction with Rigidur boards.
|
guest ::
