|
|
Automated measurement of circuit characteristics of the current amplifier
Polák, Josef ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
The aim of my bachelor thesis was to construct a system for measuring DC and AC current measurements of selected characteristics of an amplifier with controllable amplification DACA. It describes the internal structure and the principle of setting the gain of the amplifier. I put together programs for controlling of measurement systems in the program Agilent VEE 9.2. The software communicates with devices via the GPIB bus. For saving and processing data is use Microsoft Excel. With this program Agilent VEE can communicate. With the incurred DC and AC measuring system I carried out measurements at one current amplifier. The measured values are processed into graphs and are given in the last two parts of this work. These measurements shows that the current amplifier operates under the assumptions and myself designed and constructed measurement systems work without problems.
|
|
|
Design of frequency filters with active current elements
Hort, Jiří ; Jeřábek, Jan (referee) ; Vrba, Kamil (advisor)
This bachelor's thesis deal with designing frequency filters with current active elements. Preamble is devoted to description of basic properties and division of filters. Next part presents some way of designing frequency filter. The element CMI (Current Mirror and Inverter) seems like optimal possible solution for application working in purely current mode. To design purposes serves generalized version GCMI. This thesis describes way of designing the autonomous circuit based on full admitance nets with one and two active elements CMI. Several autonomous circuits with four or five passive elements are derived from every admitance network. Individual autonomous circuits are then presented in chart with their characteristic equation. In conclusion is shown design of selected multifunction frequency filter working in current mode as in voltage mode together with characterization for its various transmission functions.
|
|
|
Differential and pseudo-differential filtering circuits
Hrbek, Tomáš ; Bečková, Zuzana (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis deals with analog frequency filters operating in differential and pseudodifferential mode. It is focused on active filters second order that use modern active elements. For specific solution is analyzed the ability to control filter parameters. It also deals with the design of fully differential filters and transformations from non-differential filters. The thesis analyzes three specific filtering solutions with which ideal simulations and simulations using third order models are performed. A printed circuit is constructed for one filter solution, its parameters are measured and compared with simulations.
|
|
|
Design and analysis of electronically reconfigurable filtering structures
Kříčka, Tomáš ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis deals with the proposal of analog filters with the ability of the electronic reconfiguration. The main aim was to propose three fully electronically reconfigurable filters using different methods. The work focuses on the use of modern active elements that ensure the electronic reconfiguration. Specifically on operational transconductivity amplifiers, second-generation current conveyors and current amplifiers. The transfer functions are simulated in the Orcad PSpice software, at the ideal and behavioral level. Sensitivity and parasitic analysis is applied to the two proposed filtration structures. Both structures are made on printed circuit boards, which are measured and then their transfer functions are compared with the simulated functions.
|
|
|
Electronically Configurable Transfer Structures
Langhammer, Lukáš ; Hospodka, Jiří (referee) ; Vávra, Jiří (referee) ; Šotner, Roman (advisor)
Práce se zaměřuje na vývoj a výzkum v oblasti elektronicky rekonfigurovatelných přenosových struktur. Primárním cílem je návrh těchto struktur za užití moderních elektronicky řiditelných aktivních prvků. V práci je prezentováno množství elektronicky rekonfigurovatelných filtračních struktur, jež byly vytvořeny za užití různých návrhových metod. Důraz je dále kladen na možnost řídit některý z typických parametrů filtru pomocí řiditelných aktivních prvků. Práce dále obsahuje několik obvodových návrhů aktivních prvků či stavebních bloků s vhodně řešenou elektronickou řiditelností, tak, aby tyto prvky/bloky mohly být dále použity pro návrh elektronicky rekonfigurovatelných filtrů. Správnost návrhu jednotlivých zapojení je podpořena PSpice a Cadence simulacemi s modely na tranzistorové úrovni. Vybraná zapojení jsou dále realizována za pomocí dostupných aktivních prvků a podrobena experimentálnímu měření.
|
|
|
Synthesis of frequency filters with ability of the electronic reconfiguration
Theumer, Radek ; Šotner, Roman (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis deals with proposal of frequency filters providing electronic controllability of its transfer function. The main aim was to propose new filtering structures working in voltage and current mode based on suitable proposal methods. Active elements are implemented by available operational transconductance amplifiers, current amplifiers and conveyors, eventually voltage amplifiers. Four different active controllable filters are presented. Their function is simulated in software PSpice with help of models at transistor level in comparison with ideal behavior (idealized models). Two designed filtering structures were chosen and complemented on parasitic, sensitivity, stability, temperature analysis and Monte Carlo analysis. These circuits were realized on PCB. Measurement results are presented at the end of thesis, including comparison with simulations.
|
|
|
Synthesis of differential filtering structures with complex active elements
Pánek, David ; Kubánek, David (referee) ; Langhammer, Lukáš (advisor)
This document is focused on already existing single-ended frequency filters with modern active components working in current mode and their modification into fully-differential ended form. After the modification both versions were compared between each other. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier), UCC (universal current conveyor), VDTA (Voltage differencing transconductance amplifier), CDTA (Current differencing transconductance amplifier) and VDCC (voltage differencing current conveyor). Four circuits have been chosen and transformed into their differential form. Two circuits have been chosen and realised into PCB and then practicaly measured in a laboratory. The last part is a summary of simulations and measured results and check of circuits behavior result.
|
|
|
Differential and pseudo-differential filtering circuits
Hrbek, Tomáš ; Bečková, Zuzana (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis deals with analog frequency filters operating in differential and pseudodifferential mode. It is focused on active filters second order that use modern active elements. For specific solution is analyzed the ability to control filter parameters. It also deals with the design of fully differential filters and transformations from non-differential filters. The thesis analyzes three specific filtering solutions with which ideal simulations and simulations using third order models are performed. A printed circuit is constructed for one filter solution, its parameters are measured and compared with simulations.
|
|
|
Analysis of filter structures with controllable amplifiers
Pánek, David ; Langhammer, Lukáš (referee) ; Polák, Josef (advisor)
This bachelor thesis is focused on simulations and practical realizations of already existing frequency filters with modern active components in current mode. New simulation ABM model (Analog Behavioral Model) of DACA (Digital Adjustable Current Amplifier) element was used in the simulations. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - DACA (Digital Adjustable Current Amplifier), MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier) and UCC (universal current conveyor). Four circuits have been chosen and implemented into PCB (printed circuit board) on the basis of simulation results. The first circuit tunes the quality factor with help of DACA component. The second circuit tunes the natural frequency and quality factor with help of DACA components. The third and the fourth circuits are simulated and implemented in differential and also in single ended forms. These circuits tune the natural frequency with help of the same set of current amplification by DACA components. The last part is summary of simulation’s and practical measurement‘s result of this project.
|
|
|
Electronically reconfigurable frequency filters
Gajdoš, Adam ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
|
guest ::
