|
|
Project planning and management of construction residential houses in the file Štětí
Sládek, Lukáš ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The subject of this thesis is the preparation and organization of construction of residential buildings in Štětí. In the technological regulations deal with all the layers of flooring from the ceiling construction in residential buildings. The objects are hard floors. For floor coverings will be used PVC roofing, ceramic tiles and concrete coating. It will be used for machining of concrete. Next, I will discuss technological instruction, timing, valuation of all technological stages, construction site equipment, health and safety at work. Also here describe the proper allocation of construction processes into sub-processes to technological stage of completion of work most effectively achieve the objective.
|
|
|
Methods for assesment of the lime plasters quality
Krásná, Veronika ; Másilko, Jiří (referee) ; Opravil, Tomáš (advisor)
This thesis examines the methods for assessing the quality of lime plaster. The goal is to create and test a set of basic methodological simple test for testing of lime plaster.The test will use destructive and nondestructive methods. Determining the compressive and bending strength, phase composition, XRD powder diffraction, and the amount of limestone present portlandit by TG-DTA and overflow with shake table. Measurements are used widely available commercial plaster mixture.
|
|
|
Thin-film geopolymeric plasters for exterior application
Ručková, Jana ; Opravil, Tomáš (referee) ; Šoukal, František (advisor)
This thesis is dealing with preparation of exterior thin-layer geopolymer plaster where the effect of supplement of various types of superplasticizers in their different amounts on the quality of geopolymer plaster is studied. The objective of this work is to determine suitable type of superplasticizer which would improve rheological quality of fresh plaster mix, its adhesion to the surface and last but not least would preserve good mechanical qualities of geopolymer binder. In the experimental part initially test subject were prepared from meta-kaolin, water, water-glass, sand and with supplement of various types of superplasticizers in various amounts. These test subjects were tested for compressive and flexural strength. Further workability and adhesion to the surface of these plaster pastes was observed. Geopolymer pastes were also subjected to calorimetric comparison of kinetic processes occurring during solidification and hardening. In order to identify the exact composition of superplasticizers used as rheological modifiers, the infra-red spectrometry of these substances was performed. There was a need to specify the water-glass in more detail as well, elemental analysis was performed on it on radiographic fluorescent spectrometry. To closer identify the structure and distribution of superplasticizer in geopolymer paste the pictures of the mix which was the most suitable for use for exterior thin-layer geopolymer plasters were made on scanning electron microscope. On the same mix radiographic diffraction on the powder samples was also performed which served for phase analysis.
|
|
|
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
|
|
| |
|
|
Pension PREMIER in Janov nad Nisou, implementation of finishing works
Pavlíková, Jana ; Nečasová, Barbora (referee) ; Kovářová, Barbora (advisor)
In the bachelor thesis I have dealt with finishing work on the top, where I focused on making plaster Hasit and construction of sauna. Plasters are made manually from before-spraying, the core of plaster and final stucco plaster. The construction of sauna lies in the design of the squared timbers. Insulation - PU boards is located among them. The final surface is made use of floorboards, which are made from Scandinavian spruce. The object for which I work processed, is located in a secluded spot in the village called Janov nad Nisou. This is of the changes to the existing layout pension Premier and his extension. As part of my bachelor thesis I'm dealing with technological stage on both objects at the same time.
|
|
| |
|
|
Semi-detached house, Lanskroun
Němec, Ondřej ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
The bachelor thesis is based on design of semi-atteched house on the street Slovenské in Lanškroun. Bulding plot is situated in new city quarter determined for family houses outside the city center. Shape of semi-atteched house is almost rectangle and it is made of two parts where each part is designed for family of four to five members. All living rooms are oriented to south that allows residents to enter the garden and the patio in first floor. Each part of house includes garage for one car.
|
|
| |
|
| |
guest ::
