|
|
The optimization of phosphate binders compozition used for refractories
Kalousová, Hana ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
This thesis deals with optimization of the composition phosphate binders. These binders are used in production of refractories. In this branch, the bauxite is very often used as an aggregate, but it contains tiny particles of iron which arise in milling process. These particles of iron react with the phosphate binder to form hydrogen – it is consequence of the reaction between phosphoric acid and iron. The formed gas causes the formation of bubbles and the deformation of refractories. The goal of this thesis is to find suitable additives which can be used to stop or to limit the production of hydrogen. Usually used binders were replaced by a model binder to simplify the system and for better understanding. The model binder was prepared in laboratory by dissolving aluminium hydroxide in phosphoric acid. They used pure powdered pentacarbonyl iron instead of tiny iron particles from the milling process. The model binder was modified with using a few inhibitors. The calcimetr was used to measure their influence on the production of hydrogen, as well as measuring concentrated rows of selected inhibitors. These rows are necessary to optimize the inhibitors quantity added in the binder.
|
|
|
The study of the refractory concrete binding system based on phosphoric acid and aluminous cement
Pavlík, Tomáš ; Švec, Jiří (referee) ; Šiler, Pavel (advisor)
This thesis deals with refractory concrete binding system based on aluminous cement and phosphoric acid. The prepared refractory concretes were fired at 1 000 °C. Various effects on compressive strength of refractory concrete were studied. The influence of aluminous cement content and phosphoric acid content, the influence of various admixtures, the influence of plasticizers and the influence of time and method of sample storage were studied. Simultaneous thermogravimetry and differential thermal analysis of the basic unfired sample were performed. Finally, selected refractory concretes were fired at 110, 200, 400, 600, 800, 900, 1 000 and 1 100 °C. The compressive strength of these samples was measured and powder X ray diffraction analysis was performed. The compressive strength of refractory concretes under intermediate temperatures (800–1 100 °C) was most increased in samples with metakaolin and gray microsilica.
|
|
|
Impact of input parameters variation on fabrication of nanoporous alumina
Hriczo, Filip ; Macháčková, Marina (referee) ; Hrdý, Radim (advisor)
This thesis examines and tests acids and conditions, which make the production of nanoporous ceramic at the thin aluminium layer the most effective and provide the highest quality. This paper describes the production of nanoporous structures with pore size 15-400 nm, depending on the electrolyte. Creating a regular hexagonal structure by electrochemical oxidation is dependent on many parameters that affect the regularity of structure and parameters of the ceramics produced. They were investigated primarily by changes in temperature and input voltage. All results were examined by SEM analysis.
|
|
|
The study of the refractory concrete binding system based on phosphoric acid and aluminous cement
Pavlík, Tomáš ; Švec, Jiří (referee) ; Šiler, Pavel (advisor)
This thesis deals with refractory concrete binding system based on aluminous cement and phosphoric acid. The prepared refractory concretes were fired at 1 000 °C. Various effects on compressive strength of refractory concrete were studied. The influence of aluminous cement content and phosphoric acid content, the influence of various admixtures, the influence of plasticizers and the influence of time and method of sample storage were studied. Simultaneous thermogravimetry and differential thermal analysis of the basic unfired sample were performed. Finally, selected refractory concretes were fired at 110, 200, 400, 600, 800, 900, 1 000 and 1 100 °C. The compressive strength of these samples was measured and powder X ray diffraction analysis was performed. The compressive strength of refractory concretes under intermediate temperatures (800–1 100 °C) was most increased in samples with metakaolin and gray microsilica.
|
|
|
Impact of input parameters variation on fabrication of nanoporous alumina
Hriczo, Filip ; Macháčková, Marina (referee) ; Hrdý, Radim (advisor)
This thesis examines and tests acids and conditions, which make the production of nanoporous ceramic at the thin aluminium layer the most effective and provide the highest quality. This paper describes the production of nanoporous structures with pore size 15-400 nm, depending on the electrolyte. Creating a regular hexagonal structure by electrochemical oxidation is dependent on many parameters that affect the regularity of structure and parameters of the ceramics produced. They were investigated primarily by changes in temperature and input voltage. All results were examined by SEM analysis.
|
|
|
The optimization of phosphate binders compozition used for refractories
Kalousová, Hana ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
This thesis deals with optimization of the composition phosphate binders. These binders are used in production of refractories. In this branch, the bauxite is very often used as an aggregate, but it contains tiny particles of iron which arise in milling process. These particles of iron react with the phosphate binder to form hydrogen – it is consequence of the reaction between phosphoric acid and iron. The formed gas causes the formation of bubbles and the deformation of refractories. The goal of this thesis is to find suitable additives which can be used to stop or to limit the production of hydrogen. Usually used binders were replaced by a model binder to simplify the system and for better understanding. The model binder was prepared in laboratory by dissolving aluminium hydroxide in phosphoric acid. They used pure powdered pentacarbonyl iron instead of tiny iron particles from the milling process. The model binder was modified with using a few inhibitors. The calcimetr was used to measure their influence on the production of hydrogen, as well as measuring concentrated rows of selected inhibitors. These rows are necessary to optimize the inhibitors quantity added in the binder.
|
guest ::
