National Repository of Grey Literature 10 records found  Search took 0.00 seconds. 
Lampshade industrial lighting fixtures from the sheet metal - a proposal production technology
Zelinka, Jiří ; Rumíšek, Pavel (referee) ; Špaček, Jindřich (advisor)
The aim of this Batchelor Thesis is to compare different deep drawing technologies, for given deep-drowen product – an industrial lamp, made of steel brass. The technologies to compare will be hydro-mechanical drawing, gradual deep drawing and metal stamping technology. The procedure of simple hydro-mechanical drawing parameters calculation will be indicated. The prevalent part of the Thesis is aimed at different technologies description, and on an illustrating example of individual operations expensiveness.
The flat new building
Vaněček, František ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The proposed apartment building including a fixed level pavement, parking spaces and a driveway is situated on land number 723/213 and 723/184 (farm land) which is located in the southeastern part of the town Horní Stropnice along the main road towards Trhove Sviny. The apartment block has been designed as a four storey building for small and larger families in 14 seperate apartments (4 apartments each on the first, second and third floors and 2 apartments, hair salon and office on the ground floor) without any basement. The key construction feature is a wall system based on basic bands of simple concrete with a concrete mounted ceiling and a roof truss with gable roof tiles at an angle of 35°. There will be 14 apartments in total (14x 3+kitchen unit). The apartment windows will have sufficient sunlight and silencing. The main entrance, covered with a concrete porch roof, will be west facing. Each apartment will be constructed around the entrance foyer, which connects the main living quarters consisting of a combined kitchen dining room, living room , toilet, bathroom, (including bath, sink, washing machine), bedroom and one or two children's room, (depending on the size of the apartment). Ground floor terraces and 1st to 3rd floor balconies will be accesed via the living rooms. There will be a technical room on the ground floor which will have two gas boilers, a hot water cylinder, central heating distribution, sewer and some individual storage space for each apartment. The space under the staircase will serve as storage for prams or bicycles. The hair salon and building office will be built in the entrance foyer, which will include a public convenience for visitors and an entrance to the visitor's waiting room, guest rooms, individual work rooms all of which will be ready for use. A new asphalt road will enable access to the new apartment block and the neighbouring apartment block on land number 723/13.
Utilization of SolidWorks at power electrical engineering
Fazekas, Tamás ; Mikulčík, Aleš (referee) ; Veselka, František (advisor)
The purpose of the bachelor thesis was to became familiar with parametric CAD systems and create a simple model in high power electronics branch. The first part of the project summarizes the most known CAD systems. The second part deals with a specifics software:SolidWorks 2008. Finally, a simple model has been created in Solidworks 2008 from the power electronics branch. It is a model of an electric machine which is suitable for the research of the sliding contact.
Technology of emitter production
Šrotíř, Petr ; Císařová, Michaela (referee) ; Dvořák, Milan (advisor)
The goal of this bachelor thesis is to compare the technologies of production of given workpiece using the technology of spinning and deep drawing. The object of this project is an emitter and is supposed to be made of sheet metal. The workpiece will be deep drawn in the experimental drawing tool. An economic review by production of 1000 pieces will be worked out at the end of the bachelor thesis.
Methodology of working with 3D parts from SolidWorks through SolidCAM for milling and engraving on a CNC milling machine
KAŠPAR, Filip
The theoretical part introduces the technique of working in 3D modeler SolidWorks. This part is mainly devoted to 3D elements and marginally also sketching. This section is followed by a description of the environment in SolidCAM and theories related to how to work with this software. In the Practical part there is a detailed description of creating a new project in SolidCAM, explained on a specific engraved part. The conclusion of the work is a generated control code for a CNC machine tool.
Attitudes of secondary School Students in the City of Česká Lípa on Issues of Partner Cohabitation and Parenthood
Železná, Jana ; Mojžíšová, Jarmila (advisor) ; Nováková, Daniela (referee)
The topic of this thesis is the research and characteristics of partner cohabitation of highschool students in present times, adolescents attitudes to the primary values of family and their preparedness for parenthood. The theoretical part is engaged in the history of partnership coexistence from the original models untill the present. Then it's engaged in the basic definitions of a given problematics and attitudes of teenagers to partnership and parenthood relationships. It is looked on the differences of upbringing in various social enviroments. The main goal of the practical part is to compare the opinions, values and attitudes of the chosen sample of highchool students and apprentices according to their family situation. Through the subsequent analysis of the collected data will be found out, whether the current students' goals are more focussed on the career progress, or to getting married. Keywords: family, partnership, cohabitation, history of family, young people, part, sex education, secondary school
The flat new building
Vaněček, František ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The proposed apartment building including a fixed level pavement, parking spaces and a driveway is situated on land number 723/213 and 723/184 (farm land) which is located in the southeastern part of the town Horní Stropnice along the main road towards Trhove Sviny. The apartment block has been designed as a four storey building for small and larger families in 14 seperate apartments (4 apartments each on the first, second and third floors and 2 apartments, hair salon and office on the ground floor) without any basement. The key construction feature is a wall system based on basic bands of simple concrete with a concrete mounted ceiling and a roof truss with gable roof tiles at an angle of 35°. There will be 14 apartments in total (14x 3+kitchen unit). The apartment windows will have sufficient sunlight and silencing. The main entrance, covered with a concrete porch roof, will be west facing. Each apartment will be constructed around the entrance foyer, which connects the main living quarters consisting of a combined kitchen dining room, living room , toilet, bathroom, (including bath, sink, washing machine), bedroom and one or two children's room, (depending on the size of the apartment). Ground floor terraces and 1st to 3rd floor balconies will be accesed via the living rooms. There will be a technical room on the ground floor which will have two gas boilers, a hot water cylinder, central heating distribution, sewer and some individual storage space for each apartment. The space under the staircase will serve as storage for prams or bicycles. The hair salon and building office will be built in the entrance foyer, which will include a public convenience for visitors and an entrance to the visitor's waiting room, guest rooms, individual work rooms all of which will be ready for use. A new asphalt road will enable access to the new apartment block and the neighbouring apartment block on land number 723/13.
Utilization of SolidWorks at power electrical engineering
Fazekas, Tamás ; Mikulčík, Aleš (referee) ; Veselka, František (advisor)
The purpose of the bachelor thesis was to became familiar with parametric CAD systems and create a simple model in high power electronics branch. The first part of the project summarizes the most known CAD systems. The second part deals with a specifics software:SolidWorks 2008. Finally, a simple model has been created in Solidworks 2008 from the power electronics branch. It is a model of an electric machine which is suitable for the research of the sliding contact.
Technology of emitter production
Šrotíř, Petr ; Císařová, Michaela (referee) ; Dvořák, Milan (advisor)
The goal of this bachelor thesis is to compare the technologies of production of given workpiece using the technology of spinning and deep drawing. The object of this project is an emitter and is supposed to be made of sheet metal. The workpiece will be deep drawn in the experimental drawing tool. An economic review by production of 1000 pieces will be worked out at the end of the bachelor thesis.
Lampshade industrial lighting fixtures from the sheet metal - a proposal production technology
Zelinka, Jiří ; Rumíšek, Pavel (referee) ; Špaček, Jindřich (advisor)
The aim of this Batchelor Thesis is to compare different deep drawing technologies, for given deep-drowen product – an industrial lamp, made of steel brass. The technologies to compare will be hydro-mechanical drawing, gradual deep drawing and metal stamping technology. The procedure of simple hydro-mechanical drawing parameters calculation will be indicated. The prevalent part of the Thesis is aimed at different technologies description, and on an illustrating example of individual operations expensiveness.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.