|
|
Working efficiency of boilers
Rejsa, Vojtěch ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
This work deals with the determination of the operational efficiency of solid fules boilers for their inclusion in the relevant emission class according to ČSN EN 303-5. Two steel boilers of the same manufacturer, type and performance but of different ages, were measured. The experimental measurments in the real operation of the boilers were carrien out during the combustion of two types of fuels, namely brown coal and spruce wood.The operational efficiency of the monitored sources was calculated from the measured data using both direct and undirect methods. The found efficiency of the boilers corresponds to the expected values, due to their construction, age and the way of using individual components and regulations. In the project part of this work there is a proposal of heating of the family house for the condition of the building before and after the insulation. The calculation was made for the solid fuel boiler and heat pump. The building is heated by radiators and floor heating. The design of the whole system, technical report and project documentation were prepared for each variant.
|
|
|
Operational efficiency of boilers
Doležal, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is the operational efficiency of heat sources. The work had several goals. The first was to determine the efficiency of the wood boiler according to available calculation methods and to compare the methods among them. The second was to determine the difference in the performance of the flue gas analyzer and the real calculation. Further, to determine the efficiency of a boiler firing different wood species - spruce and hornbeam based on their properties and elemental composition. Experimental measurement of various operating states of effectiveness took place in an older two-generation family house, which was also the subject of the project part. Due to lack of project documentation, it was necessary to focus and plot the object. Afterwards, the building was thermally inspected and the design of the heating system and the reconstruction of the whole heating system was carried out. The project was developed in two variants for two different heat sources - a heat pump and a solid fuel boiler for heating and water preparation. The thesis deals with the technical report, the conceptual solution of the related professions, the evaluation of the heat source variants and the project documentation.
|
|
|
Performance of heat
Kocandová, Karolína ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The topic of the diploma thesis is the operational efficiency of heat sources . The thesis is divided into three parts. In the first part a theoretical solution of the heat sources efficiency can be found. In the second part there is a calculation solution of the project. The project solves the heating of a football stadium. Two variants of the heating source and warm water preparation are suggested and the variants are consequently compared and evaluated. The last part is experimental - the topic of the experiment is the efficiency of heat sources.
|
|
|
Operational efficiency of gas boilers
Marčiš, Šimon ; Vyhlídalová, Karolína (referee) ; Počinková, Marcela (advisor)
This master’s thesis elaborates a design of water heating and heating system for a building of a rehabilitation center in Horný Hričov. The theoretical section describes operational efficiency of gas boilers and associated calculation methods. The experimental section covers measurements of condensing gas boiler at various temperatures of heating water conducted in university laboratory. Operational efficiency was then calculated using indirect method based on the measurement results. Subsequently, calculated values and values measured by an operational efficiency analyzer were compared. The comparison revealed minor deviations in operational efficiency values and different values of condensing heat utilization between the calculations and the analyzer results. The analytical section of the thesis consists of complex designs of two versions of the heating system and the water heating. The first design version uses condensing gas boilers as a heat source while the second version uses a water-air heat pump instead. The project section of the thesis is executed in the scope for a building permit and consists of a technical report and a design documentation.
|
|
|
The Czech banking sector: Determinants of Profitability
Hykl, Daniel ; Pečená, Magda (advisor) ; Teplý, Petr (referee)
This thesis is concerned with Czech banking sector in 2015 - 2020 and its profitability. A set of bank-specific and macroeconomic variables is tested for profitability determination effects by a general profitability model estimated with system GMM, FE, and OLS methods, yearly and quarterly data are used. The results indicate negative effects on bank profitability of the following on both yearly and quarterly bases: capitalization, operational efficiency, and inflation change, and positive effects on bank profitability of the following on both yearly and quarterly bases: bank size and GDP growth. The thesis also analyzes quarterly changes in bank assets, liabilities, and equity. The results indicate systematic drops of liabilities and assets reported as of year-ends. Potential explanations are discussed along with suggestions for further research as this study presents a complex set of insights, results, and experience ready to be augmented with further efforts.
|
|
|
Operational efficiency of gas boilers
Marčiš, Šimon ; Vyhlídalová, Karolína (referee) ; Počinková, Marcela (advisor)
This master’s thesis elaborates a design of water heating and heating system for a building of a rehabilitation center in Horný Hričov. The theoretical section describes operational efficiency of gas boilers and associated calculation methods. The experimental section covers measurements of condensing gas boiler at various temperatures of heating water conducted in university laboratory. Operational efficiency was then calculated using indirect method based on the measurement results. Subsequently, calculated values and values measured by an operational efficiency analyzer were compared. The comparison revealed minor deviations in operational efficiency values and different values of condensing heat utilization between the calculations and the analyzer results. The analytical section of the thesis consists of complex designs of two versions of the heating system and the water heating. The first design version uses condensing gas boilers as a heat source while the second version uses a water-air heat pump instead. The project section of the thesis is executed in the scope for a building permit and consists of a technical report and a design documentation.
|
|
|
Working efficiency of boilers
Rejsa, Vojtěch ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
This work deals with the determination of the operational efficiency of solid fules boilers for their inclusion in the relevant emission class according to ČSN EN 303-5. Two steel boilers of the same manufacturer, type and performance but of different ages, were measured. The experimental measurments in the real operation of the boilers were carrien out during the combustion of two types of fuels, namely brown coal and spruce wood.The operational efficiency of the monitored sources was calculated from the measured data using both direct and undirect methods. The found efficiency of the boilers corresponds to the expected values, due to their construction, age and the way of using individual components and regulations. In the project part of this work there is a proposal of heating of the family house for the condition of the building before and after the insulation. The calculation was made for the solid fuel boiler and heat pump. The building is heated by radiators and floor heating. The design of the whole system, technical report and project documentation were prepared for each variant.
|
|
|
Operational efficiency of boilers
Doležal, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is the operational efficiency of heat sources. The work had several goals. The first was to determine the efficiency of the wood boiler according to available calculation methods and to compare the methods among them. The second was to determine the difference in the performance of the flue gas analyzer and the real calculation. Further, to determine the efficiency of a boiler firing different wood species - spruce and hornbeam based on their properties and elemental composition. Experimental measurement of various operating states of effectiveness took place in an older two-generation family house, which was also the subject of the project part. Due to lack of project documentation, it was necessary to focus and plot the object. Afterwards, the building was thermally inspected and the design of the heating system and the reconstruction of the whole heating system was carried out. The project was developed in two variants for two different heat sources - a heat pump and a solid fuel boiler for heating and water preparation. The thesis deals with the technical report, the conceptual solution of the related professions, the evaluation of the heat source variants and the project documentation.
|
|
|
Performance of heat
Kocandová, Karolína ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The topic of the diploma thesis is the operational efficiency of heat sources . The thesis is divided into three parts. In the first part a theoretical solution of the heat sources efficiency can be found. In the second part there is a calculation solution of the project. The project solves the heating of a football stadium. Two variants of the heating source and warm water preparation are suggested and the variants are consequently compared and evaluated. The last part is experimental - the topic of the experiment is the efficiency of heat sources.
|
guest ::
