|
|
Technology project and layout for holder
Mottl, Jan ; Žák, Ladislav (referee) ; Rumíšek, Pavel (advisor)
Technology project and layout for holder. Bachelors thesis of the bachelor’s studies the 3rd year. School year 2008/2009, education group 3P1. FSI VUT in Brno. Institute of technology, department of forming. April 2009, pages 47, pictures 28, tables 2, supplements 9. Bachelors thesis which was elaborated in the frame of the bachelor’s studies branch 2307 submitting the technology project and layout of the holder. Component are produced from material 11 321 using of undermentioned literature pursuit a problem of the select material, sheet metal cutting and bending which was designed by cutting with processual tool and bending tool. At designed cutter and bending was used of standardised components. Project organization of production is designed so, to keep up produce of requisite series in a year.
|
|
|
New trends in processing of metal sheet with coating
Veverka, Štěpán ; Dvořák, Milan (referee) ; Císařová, Michaela (advisor)
Presented document worked out as the part of bachelor study B2339-00 Mechanical Engineering deals with new trends in processing of coated metal sheets. With consideration of available literature are introduced issues of surface treatment, cutting, bending, drawing and spinning of altered sheets including also the descriptions of some machines which apply these technologies.
|
|
|
Technology project and layout for holder
Perutka, Michal ; Žák, Ladislav (referee) ; Rumíšek, Pavel (advisor)
PERUTKA, Michal. The draft layout of technology and production of holder. Thesis of the Bachelor´s studies, 3rd year, academic year 2008/2009, education group 3P1. FSI VUT Brno, Department of Engineering Technology, Department of Forming, May 2009, pages 50, pictures 23, tables 8, supplements 9. The project solved in the framework of Bachelor´s studies presents a proposal of the technology and production arrangement of a holder – piece of steel 11 320.0. The estimated series production is 1 000 000 pieces ar year. The thesis describes the manufacturing operations sheet metal cutting, bending and surface treatment. Processual cutting tool used standardized parts and should be treated as a simple assembly clamped to the press LENR 40-A (manufacturer ŠMERAL Trnava, Slovakia with a nominal shearing force 400 kN), which is also used for the bending operation realized on a simple bending tool, clamped also in the form of a stand in the same kind of press.
|
|
|
Technology for bending thin-walled tube of cooper
Solil, Petr ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
Bachalor's thesis is concerned with issues of cutting and bending the thin-walled pipes which are produce from Cu-DHP material by EN12735-2. Thesis is also concerned with banding tool. There is designed banding tool for thin-walled copper pipes in the U form. Thesis contains calculations, drawing of banding tool and experiment with the tensile and bending tests of thin-walled pipes in the U form.
|
|
|
Technology of Production single parts with multiple bend
Daňhel, Marek ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
DAŇHEL, M. Production Technology for Parts with Multiple Bends. Bachelor thesis, Combined form of bachelor degree programme ENGINERING, subject of study Manufacturing Technology, 1st form, 3rd year of study, academic year 2008/2009, study group 3K1. FME BUT Brno, Institute of Manufacturing Technology, Department of metal forming and plastics. No. of pages 47, pictures 32, tables 6, supplements 9. Bachelor thesis supervisor doc. Ing. Milan Dvořák, CSc. _______________________________________________________________ The project developed within the framework of the bachelor degree programme, subject of study B2307-00 Manufacturing Technology, submits a bending technology proposal for a part with multiple bends. The bachelor thesis presents a theory overview related to the forming operations comprising bending, a selection of suitable alternatives for the manufacture of the given part and the production sequence for this part. The design of the bending tool is made in accordance with valid engineering standards for forming operations. As the basis for production the project includes manufacturing drawings of the punch and lower die and the drawing of the bending tool assembly. Technical and economic evaluation and conclusions in respect of the proposed technology constitute a part of the project.
|
|
| |
|
|
Analýza vad vzniklých při strojním ohýbání bukových hranolků
Ondroušková, Jitka
This thesis analyzes the conditions and parameters entering the selected operations while bending beech scantlings. Then it deals with the requirements for the properties and quality of the material. The analysis was performed on the plasticization steaming operation and the bending operation on the bending machine with rotating core. It also describes a clarifies the effect of selected factors on the origin and nature of the defects. The measurements and observations were carried out at the factory Ton plc. The general conclusions confronted with the literature concerned with the topic in the past were inferred in the end of the thesis.
|
|
| |
|
|
The comparison of business valuation methods DCF and EVA
Horáček, Jiří ; Jurečka, Jan (advisor) ; Hejduková, Markéta (referee)
The object of the diploma paper "The comparison of business valuation methods DCF and EVA" is to realize a theoretical confrontation of income approach methods of Discounted Cash Flow (including its all versions: entity, equity and APV) and Economic Value Added, and also to apply all of the methods to valuate a company and their consequent reconciliation. The study is focusing on cases when the methods should be equivalent and when they may differ.
|
|
|
Ocenění společnosti Metrostav a.s.
Job, Václav ; Kopalová, Helena (advisor) ; Scholleová, Hana (referee)
Cílem diplomové práce je ocenit společnost Metrostav a.s. prostřednictvím metody DCF ve variantě EVA a DCF ve variantě FCFF. Vlastnímu ocenění předchází popis teoretické stránky problematiky, která byla zpracována. Práce obsahuje strategickou, finanční a SWOT analýzu, které představují základ pro sestavení finančního plánu. Ten se stává prostředkem, který umožňuje vypočíst volné peněžní toky, které jsou nezbytné pro oceňovací proces.
|
guest ::
