|
|
Proposition of new type of injection material with electrically conductive function
Uher, Vojtěch ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
The bachelor thesis deals with the design of a new type of grouting material with electrically conductive function suitable for connecting cracks and gaps in building protection systems against lightning strikes and surges. The theoretical part summarizes the important knowledge about the grouting and grouting materials, introduces the current state of knowledge in the field of lightning and surge protection of buildings and also the preconditions of electrical conductivity of cement-based composite materials. In the practical part are summarized selected properties, which the electrically conductive grouting material should have and the relevant standards tests for experimental verification of selected properties are described. A wide range of primary and secondary fillers are studied and the most suitable ones are chosen to achieve a low electrical resistivity value. At the end of the thesis, there are recipes based on amassed knowledge and using secondary fillers to reduce the environmental impact of the developed materials during mass production. Reduced resistivity has been demonstrated in recipes using waste carbon and chopped carbon fibers, but has failed to fully meet standard requirements. The result of the work are new recipes and knowledge that can serve as a basis for further research.
|
|
|
Application of overvoltage protection in LV networks
Knebl, Jan ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
This paper describes the design of surge protection for objects of civil construction. The aim of this paper is to acquaint the reader with the problems of this region, which is nowadays especially for houses neglected. The introductory part of the thesis is focused on the theoretical analysis of the problem and become familiar with the standards in force, without which a person moving in this field certainly can not do. In the first major section is a repartition surge in general terms. In the second chapter, a repartition of surge protection on the inside and outside and a description of the individual components of these protections. The third chapter is made complete design protection for the school building, the first step is an analysis of the risks to unprotected building, then the protected and ultimately design of internal and external surge protection. In the last chapter, a check is made of the risk analysis using DEHN Support.
|
|
|
Electrical installation of family house - implementing documentation
Hájek, Karel ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
Main goals of this bechelor´s thesis are devided into three parts. First part introduces reader with power and data instalations issues including legislation necessary for project creation in electrickal engineering, object connection to distribution network, basic electric wiring including circuit breakers and electric wiring design in residential buildings, which mainly speaks about ways of installation of electric wiring and elektrical zones. In addition internal and external lighting protection and basic information about switchgear. Second part defines of project documentation creation, both design and text part. The last part is the practical part that looks into complete electrical installation of family house project, which contains marking both low-power and high-power circuits into plan view, house switchgear and electro meter scheme, LPS design and technical report with economical evaluation.
|
|
|
Detail design of power and data wiring of a new family house
Zejda, Pavel ; Janík, Daniel (referee) ; Bátora, Branislav (advisor)
The aim of the work is to get acquainted with the requirements for wiring of a family house, description of low-current systems. What are the risks of a lightning strike to the building or its surroundings. Systems for external and internal lightning protection, surge protection are described. In the last chapter, the actual design of the electrical installation and the economic assessment of the use of the system installation is presented.
|
|
|
Proposition of grounding enhancing cement composite mixture
Sochor, David ; Bydžovský, Jiří (referee) ; Drochytka, Rostislav (advisor)
The bachelor thesis deals with the design of a conductive cement composite grounding mixture for protection of building structures in areas with low conductivity. The theoretical part is mainly focused on summarizing the knowledge of the current protection of buildings against lightning and overvoltage. The study includes knowledge in the field of conductive building materials and aims to present the design of a cement composite mixture to improve grounding. Choosing the right raw materials to achieve electrical conductivity. A maintenance-free material has been developed, no humidity needed material while maintaining conductivity. The work it examines the possibilities of using industrial wastes as secondary raw materials. The conclusion focuses on laboratory testing of newly developed materials, summary and discussion of the results. With the developed samples, the resistivity was greatly reduced. The positive effect of ferric dust and carbon particles has been demonstrated.
|
|
|
The design of the lightning protection for the house
Tesař, Luděk ; Bátora, Branislav (referee) ; Toman, Petr (advisor)
This work describes the design rules for the lightning protection of civic construction. The aim of this work is to provide a comprehensive view of the basic design rules for the lightning protection. The actual design is preceded by the detailed introduction to the relatively large problems in this sphere. The introductory part is focused on the approach of technical standards and legislative requirements. In the second chapter the thesis deals with lightning in general and lightning current and its parameters. The following chapter focuses on the effects of lightning current, indicating the damage caused by lightning strikes to the building or its surroundings. Then the thesis deals with analysis and risk management. The next chapter describes and explains the system of external and internal lightning protection. The last part is devoted to a specific design of the lightning protection for the chosen house.
|
|
|
Detail design of power and data wiring of a new family house
Zejda, Pavel ; Janík, Daniel (referee) ; Bátora, Branislav (advisor)
The aim of the work is to get acquainted with the requirements for wiring of a family house, description of low-current systems. What are the risks of a lightning strike to the building or its surroundings. Systems for external and internal lightning protection, surge protection are described. In the last chapter, the actual design of the electrical installation and the economic assessment of the use of the system installation is presented.
|
|
|
Proposition of new type of injection material with electrically conductive function
Uher, Vojtěch ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
The bachelor thesis deals with the design of a new type of grouting material with electrically conductive function suitable for connecting cracks and gaps in building protection systems against lightning strikes and surges. The theoretical part summarizes the important knowledge about the grouting and grouting materials, introduces the current state of knowledge in the field of lightning and surge protection of buildings and also the preconditions of electrical conductivity of cement-based composite materials. In the practical part are summarized selected properties, which the electrically conductive grouting material should have and the relevant standards tests for experimental verification of selected properties are described. A wide range of primary and secondary fillers are studied and the most suitable ones are chosen to achieve a low electrical resistivity value. At the end of the thesis, there are recipes based on amassed knowledge and using secondary fillers to reduce the environmental impact of the developed materials during mass production. Reduced resistivity has been demonstrated in recipes using waste carbon and chopped carbon fibers, but has failed to fully meet standard requirements. The result of the work are new recipes and knowledge that can serve as a basis for further research.
|
|
|
Proposition of grounding enhancing cement composite mixture
Sochor, David ; Bydžovský, Jiří (referee) ; Drochytka, Rostislav (advisor)
The bachelor thesis deals with the design of a conductive cement composite grounding mixture for protection of building structures in areas with low conductivity. The theoretical part is mainly focused on summarizing the knowledge of the current protection of buildings against lightning and overvoltage. The study includes knowledge in the field of conductive building materials and aims to present the design of a cement composite mixture to improve grounding. Choosing the right raw materials to achieve electrical conductivity. A maintenance-free material has been developed, no humidity needed material while maintaining conductivity. The work it examines the possibilities of using industrial wastes as secondary raw materials. The conclusion focuses on laboratory testing of newly developed materials, summary and discussion of the results. With the developed samples, the resistivity was greatly reduced. The positive effect of ferric dust and carbon particles has been demonstrated.
|
|
|
Electrical installation of family house - implementing documentation
Hájek, Karel ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
Main goals of this bechelor´s thesis are devided into three parts. First part introduces reader with power and data instalations issues including legislation necessary for project creation in electrickal engineering, object connection to distribution network, basic electric wiring including circuit breakers and electric wiring design in residential buildings, which mainly speaks about ways of installation of electric wiring and elektrical zones. In addition internal and external lighting protection and basic information about switchgear. Second part defines of project documentation creation, both design and text part. The last part is the practical part that looks into complete electrical installation of family house project, which contains marking both low-power and high-power circuits into plan view, house switchgear and electro meter scheme, LPS design and technical report with economical evaluation.
|
guest ::
