|
Detached house
Stoklas, Vojtěch ; Bečkovský, David (referee) ; Nespěšný, Ondřej (advisor)
The topic of the bachelor's thesis is the preparation of project documentation for the construction of a family house in Hustopeče nad Bečvou. The structure is designed as a detached, two-story, non-basement house with nearly zero energy consumption, intended for individual living for a family of four. The rectangular floor plan is situated in the center of the building plot and respects the character of the surrounding development. The house is designed on strip foundations made of plain concrete, supplemented with permanent formwork blocks and a base slab. The vertical load-bearing and non-load-bearing structures will be made of calcium-silicate blocks. The horizontal load-bearing elements consist of a monolithic reinforced concrete ceiling slab and a ring beam. Above the second floor is a sloped load-bearing roof structure – a wooden truss. The family house is insulated using an external thermal insulation composite system. The layout of the house corresponds to 4+KK. On the second floor, there is a master bedroom along with two children's rooms, a study, a corridor, a bathroom, a toilet, and an occasional bedroom. The master bedroom also includes a dressing room. On the first floor, besides the corridor, bathroom, toilet, and utility room, there is a living room connected to the dining area and kitchen. A pantry is located under the staircase connecting the two floors. The entrance hall connects the living space with an attached garage, which can hold up to two cars.
|
|
Single family home Česká Třebová
Foldynová, Natálie ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The subject of this bachelor's thesis is the design of a new family house and the development of the project at the implementation documentation stage. The objective is to create a project in accordance with current legislation and suitable within the context of the municipal zoning plan. The design should consider the existing terrain and surrounding buildings. It should resolve the layout of the building with regard to the cardinal directions, and appropriately select the construction system and materials used. The new family house is designed as a standalone, two-story, non-basement building for the residence of four people, with a sloping gable roof. The building has a rectangular shape. From the driveway, the house appears as a single-story structure due to the sloping plot, which allows for the lower floor to be partially buried. The entrance floor is thus the first above-ground floor and serves as the main living area, including a study. The lower floor features a spacious living room with a dining area and open kitchen, a utility room, a separate toilet, a bedroom with a bathroom, and a room for storing garden tools and furniture. The building is founded on strip foundations. The structure is constructed from ceramic blocks and is externally insulated with facade polystyrene, finished with a thin-layer silicone plaster. The facade color scheme is a combination of white and light gray. The windows and entrance doors are in anthracite color, as are the windowsills. A gravel walkway will be established around the building. The building is designed to achieve near-zero energy consumption, adhering to low-energy standards.
|
|
Apartment Building
Borková, Sabina ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building in Litomyšl. The apartment building is located in the northwestern part of Litomyšl, in an area designated for mass housing. It is a detached three-storey house that has no basement. There are 6 residential units and each apartment unit has its own garage. On the northwest side there are 12 parking spaces. The vertical construction system is made of ceramic blocks. The building is insulated by a contact insulation system ETICS made of mineral wool. Horizontal structures are made of ceiling panels filigran SPF 6 thickness of 250 mm. The balcony slabs are made of a monolithic slab with a thickness of 150 mm brought out by ISO – beams. Movement between the individual floors is ensured in the building by means of a monolithic reinforced concrete staircase and an elevator. The walls around the elevator shaft are made of lost formwork. Due to unfavorable foundation conditions, the building is based on a reinforced concrete foundation slab, which is made under the entire ground plan of the building. Above this plate there is a free space called "crawl space". Above that space there is a reinforced concrete slab, which forms the supporting layer of the floor on the ground floor. The roof of the apartment building is single-walled, vegetative. The design itself is carried out according to the permissible regulations in this locality. Part of the bachelor thesis is the management of the technical equipment of the buildings of the distribution in the building and the assessment of building physics (thermal technology, acoustics and lighting). The following programs were used for the elaboration of the project documentation: AutoCAD 2021, ArchiCAD 23, Building Designe, Hluk +, DEKSOFT, Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Adobe Acrobat
|
|
Apartment Building
Jiráček, David ; Melcr, Petr (referee) ; Kalousek, Lubor (advisor)
The assignment of my bachelor's thesis is the elaboration of project documentation for the construction of a new apartment building in Chrudim in a new location named Na Špici. The apartment building has five floors and no basement. The last fifth above-ground is receded with adjacent terraces. In the first floor there are vestibules, entrance corridors, a carriage house with a bicycle shed, a stairwell, a cellar, two technical rooms and two indoor garage spaces. There are four residential units on the first floor. On the third floor, four residential units are being changed. Three residential units are on the fourth apartment floor. On the fifth floor there are two residential units with terraces, which are designed as a single-skin flat roof for walking. The building is covered with a green single-skin flat roof. The construction system of the apartment building is made of ceramic blocks. The building is insulated with an external contact thermal insulation system ETICS made of basalt wool. the foundation of the apartment building will be on a board with foundation strips.
|
|
Apartment Building
Švecová, Michaela ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is making the project documentation for construction of an apartment building in Vysoké Mýto. The apartment building is located on the western outskirts of Vysoké Mýto, in the residential area. It is a free-standing, three-storey, non-basement building with six housing units on the second and third floor. There are technical premises and four garages on the first floor. On the east side of the building, there is a parking lot and entrances to the individual garages. The vertical structural system of the building is made of Porotherm ceramic blocks. The building is insulated by a contact thermal insulation system with EPS insulation. Horizontal structures are made of reinforced concrete monolithic ceilings. The balcony boards are made of monolithic reinforced concrete with using ISO-supports. Vertical movement is possible through a staircase that is made of monolithic reinforced concrete or through the lift which is stored in a self-supporting shaft from monolithic reinforced concrete. The building is based on drilled piles in interaction with reinforced concrete foundation strips. The roof is flat, green in combination with pea gravel. The project was designed with a respect to current development in the area and with emphasis to the regulations. Parts of the work are schemes of technical equipment of buildings in the object and reviews of construction physics, in particular thermal technics, acoustics, insolation and lighting. The following programs were used: AutoCAD 2018, AutoCAD 2021, ArchiCAD, Teplo 2017, Světlo+, Building Designe, Microsoft Word, Microsoft Excel, Microsoft Publisher, Hluk+.
|
|
The block of flats
Prchalová, Nicol ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The subject of the bachelor's thesis is to proces a design documentation for construction of apartment building that is situated in city part Brno-Chrlice in Břestislavova street on the plot number 505/3. Apartment building is non-basement and contains 11 hoising unit. Wall construction system is built from clay block Porotherm. Ceilings are represented by cast-in-place reinforced floor slab. The buildig is covered by hipped roof. There are 10 outdoor parking spaces near the building.
|
|
Apartment house in Šlapanice
Špinar, Adam ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of the Bachelor‘s thesis was to create a project documentation for the construction of the new residential building in Šlapanice with almost zero energy consumption. Object is designed as three-storey house non-basement. The new building is situated on a corner of two streets and is connected to the buildings from the southeast side. On the first floor there are three establishments, technical rooms and garage parking. On the second floor there are four residential units with a terrace. The third floor has three residential units with a balcony. The foundation structure consists of reinforced concrete belts on drilled piles. The construction system is longitudinal, made of large-format lime-sand blocks for machine bricklaying. Ceiling structures are designed as monolithic reinforced concrete. The roof structure is made of prefabricated wooden trusses. Deep foundation is used to obtain thermal energy from the subsoil using a ground-to-water heat pump. The piles are designed to be energy efficient.
|
|
Mixed-use Building in Ledeč nad Sázavou
Nevím, Tomáš ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.
|
|
New Building of apartment house
Navrátilová, Vladimíra ; Navrátil, Michal (referee) ; Kolář, Radim (advisor)
The bachelor thesis is a project of a new building of apartment house, The new building is determined for living and services. It is situated in a flat parcel. It is design as a three floors non-basement. The designed from the system Porotherm. The ceiling structure is made of concrete prestressed slabs. Form building is an oblong. Roof structure is designed as a flat roof.
|
|
Apartment Building in Ledeč nad Sázavou
Nevím, Tomáš ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The aim of this bachelor's thesis is to develop project documentation for the construction of a proposed new apartment building in Havlíčkova Street in Ledeč nad Sázavou. It is a free-standing four-storey and non-basement building. On the first floor there is a garage, cellar, utility room, cleaning room, laundry room, carriage house and lounge, which can be used for rent. The other floors are made up of residential units. There are 9 housing units. Structurally, the building is solved by a transverse load-bearing system, made of Porotherm ceramic blocks. The building is insulated with an external contact thermal insulation system, internationally referred to by the abbreviation ETICS. The roofing of the building is solved by a non-walkable single-skin flat roof with an attic made of TPO waterproofing roofing foil. The foundation of the building will be on the foundation strips. The house is located in undeveloped, slightly sloping land. An uncovered parking space with a capacity of 14 parking spaces for cars and a playground will be set up on the plot. During the design, demands were made for increased comfort in use with almost zero energy consumption.
|