|
| |
|
|
Polymer protective systems for concrete floors
Novotná, Adéla ; Vyhnánek, Miroslav (referee) ; Petránek, Vít (advisor)
The thesis is addressing the testing of protective polymer layers, which are used mainly for industrial floors. A summary table of standards is presented, dividing the test carried out on the binders, fillers, fresh mixture and polymerized material. Non standardize tests are described in detail in a very similar way as it is performed by the Institute of Technology of Building Materials and Components. The second part of my thesis is devoted to testing of the reference material and material filled with raw substances. Based on recommendations of Lena Chemical Company, filler – ground windscreen glass will be used. On this type of mixture selected set of tests needed for construction and technical certificates was performed.
|
|
|
Surface treatment for resistance improve of board materials with cement matrix and an organic filler
Zrza, Ondřej ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
As all materials used for exterior construction, cement-bonded particleboards also subject to climatic effects, such as frost, chemicals (eg. sulphates) or UV rays. Degradation of theese effects is slightly increased by organic base. Increased susceptibility can be eliminated by a effective coating, which reduces direct contact with aggresive influences on the board and provides longer durability. Theoratical part of this thesis analyzes different types of negatice influences and their effect on durability. Practical part contains selection of specific types of coating and assessment of their mechanical and aesthetic properties including spectrophotometric analysis of color change for each degradation effect.
|
|
|
Project planning and management of construction residential houses in the file Štětí
Sládek, Lukáš ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The subject of this thesis is the preparation and organization of construction of residential buildings in Štětí. In the technological regulations deal with all the layers of flooring from the ceiling construction in residential buildings. The objects are hard floors. For floor coverings will be used PVC roofing, ceramic tiles and concrete coating. It will be used for machining of concrete. Next, I will discuss technological instruction, timing, valuation of all technological stages, construction site equipment, health and safety at work. Also here describe the proper allocation of construction processes into sub-processes to technological stage of completion of work most effectively achieve the objective.
|
|
|
Surface Modification of Ferrous Materials
Jakubčíková, Lucie ; Tulka, Jaromír (referee) ; Molliková, Eva (advisor)
The bachelor´s thesis is about surface treatments. There are mentioned iron-based materials and their marking. The process of corrosion and wear of materials is described. Then is analyzed the main topic of surface pretreatments, metal, inorganic non-metallic and organic coatings. The basic properties of the coatings and their testing is described. At the end are mentioned the negative effects of the surface treatments.
|
|
| |
|
|
Construction Technology implementation stage of floors in the gymnasium building
Hánová, Kristýna ; Novotný, Michal (referee) ; Diaz, Yvetta (advisor)
This bachelor thesis deals with construction - technologic phase of floors implementation in the building of the Austrian gymnasium, which is located in Prague. The main part of this thesis is technological regulation for wear layers and floor carrier layer of anhydrite. Furthermore, the thesis addresses the situation of wider relations, principles of construction organization, proposal of construction assembly, control and testing plan, safety and health protection during the work, and the budget of items with timeline.
|
|
|
Návrh předsazené balkonové konstrukce
Nevřela, Josef
The thesis deals with the problems of balcony buildings. It also briefly describes terraces and porch. The thesis also deals with the chemical protection of these buildings. Furthermore, design protection, building safety, fire protection and ecological processing are addressed. Below is a description of how to install and describe the parts of the balcony and two other designs of another balcony. The work is also a comparison of these three projects and the reason why this balcony was chosen. The work contain bill of materials and a financial statement are set up detailing each material used in the construction.
|
|
|
Surface Modification of Ferrous Materials
Jakubčíková, Lucie ; Tulka, Jaromír (referee) ; Molliková, Eva (advisor)
The bachelor´s thesis is about surface treatments. There are mentioned iron-based materials and their marking. The process of corrosion and wear of materials is described. Then is analyzed the main topic of surface pretreatments, metal, inorganic non-metallic and organic coatings. The basic properties of the coatings and their testing is described. At the end are mentioned the negative effects of the surface treatments.
|
|
|
Surface treatment for resistance improve of board materials with cement matrix and an organic filler
Zrza, Ondřej ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
As all materials used for exterior construction, cement-bonded particleboards also subject to climatic effects, such as frost, chemicals (eg. sulphates) or UV rays. Degradation of theese effects is slightly increased by organic base. Increased susceptibility can be eliminated by a effective coating, which reduces direct contact with aggresive influences on the board and provides longer durability. Theoratical part of this thesis analyzes different types of negatice influences and their effect on durability. Practical part contains selection of specific types of coating and assessment of their mechanical and aesthetic properties including spectrophotometric analysis of color change for each degradation effect.
|
guest ::
