|
|
Návrh zařízení pro manipulaci s plastovými blistry
HAKLOVÁ, Lenka
The thesis deals with the description and design of conceptual variants of transporta-tion equipment for handling plastic trays. The equipment's task is to transport and remove plastic trays from a stack, transport them to the filling position, and stack them back into full stacks. Before elaboration, it is necessary to explain and describe the principle of operation of this specific equipment commonly referred to as a "tray-server". Within the device design, it was necessary to take into account the current state and create concepts for updating. Several solution variants were created, followed by a comparison of their technical properties using a comparative method. The winning variant was developed further, and basic strength analysis was conduc-ted.
|
|
|
Návrh vyvážecího dopravníku pro malé díly
SWACZYNA, Jakub
The thesis deals with the design update or creation of a new transportation device suitable for handling small pellets ranging from 3 to 6 mm in size from the subfloor of an injection molding press for further processing. Within the assignment, it was ne-cessary to consider a series of criteria based on the nature of the transported compo-nents, cleanliness requirements for application in pharmaceutical manufacturing, and the capabilities of the manufacturing company ENGEL Strojírenská s.r.o., which initi-ated the request for this work. Several variants of belt conveyors were created, followed by an analysis and comparison of their technical properties in terms of the importance of each functional criterion. The analysis then led to the selection of the most suitable option.
|
|
|
Office building
Rousková, Radka ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The aim of this master's thesis is to design a low-energy office building in Lanškroun. There are three parts, documentation for building permission, a concept of HVAC documentation and multi-criteria assessment in SBToolCZ. The SBToolCZ evaluates of 39 standards, which are divided into four groups – environmental, social criteria, economics and management and location. The proposed building is two-storey, the ground floor is partly below ground level and is designed of reinforced concrete. The first floor is made of CLT panels. The building has a green roof. A green facade will be made on three sides of the ground floor. On the ground floor, there are reception, a meeting room, offices, a technical and storage facilities. On the first floor, there are offices with facilities for employees. Energy for heating and domestic hot water is provided by a condensing gas boiler. Ventilation in the building is provided by an air conditioning unit with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden and the green facade. The thesis is processed mainly in the software AutoCAD, MS Word, MS Excel and DEKSOFT.
|
|
|
Environmental assessment of timbered house and brickwork block of flats
Ostrovský, Milan ; Smolík, Jindřich (referee) ; Ostrý, Milan (advisor)
This thesis is concerned with the evaluation of sustainable construction. It is a multi-criteria evaluation focused on building environmental, socio-cultural sphere, economics and management. The reviews I chose passive apartment house in two of designs. The purpose of this study is to compare the standard insulated brick buildings and in our non-traditional wood construction. At the beginning there will explain the basic concepts associated with the topic. After that, the problems of the sustainable construction and environmental impact assessment, which will describe the basic concepts, methodologies, criteria, description of evaluation. The last part will be made an example of evaluation SBToolCZ brick and wooden buildings passive residential Duma. Comparison of both results achieved certification and think about the advantages or disadvantages of both options. The aim of this thesis is dedicated readers and explain to them the issues of this topic.
|
|
|
Study of energy consumption reduction of block of flats
Svoboda, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The goal of the thesis is firstly to get all the information about the initial state of solved block of flats, which is located on the street Merhautova 76/954 in Brno – Černá pole, in terms of constructions, energy consumption and initial state of heating system. In the second part of the thesis, where are discussed the possibilities of reduction of energy consumption, variant drafts of reduction of energy consumption and their financial costs and the choice of optimal variant. Third part deals with assement of solved block of flats in terms of sustainable built environment by using tool to rate buildings in terms of sustainable built environment - SBToolCZ, evaluation of possibility to use renewables. In the end are written summaries and recommendations.
|
|
|
Assessment of sewerage systems of urban catchments
Velikovská, Kristýna ; Raček, Jakub (referee) ; Raclavský, Jaroslav (advisor)
The bachelor thesis prepares new and present knowledge of assessment of sewerage systems of urban catchments. Theoretical part of the thesis describes classical and contemporary integrated concept of draining waste water from urban catchments. In pursuance of contemporary integrated concept, there is a list of methods, which is used for monitoring conditions of sewer system, making a simulative modeling and solving of elementar tasks in water management. Practical part of the thesis uses gained knowledge to assess sewerage systems of Kladeruby nad Oslavou village. The bachelor thesis is written with respect to valid legislation.
|
|
|
Kindergarten Krabík
Jakoš, Milan ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master´s thesis is the elaboration of project documentation for kindergarten with almost zero energy consumption. The project consists of three main parts. The first part is devoted to the civil engineering design of the building. The building is designed regarding to architectural expression, quality of made and type of use. The kindergarten is designed with capacity of 48 children split into two departments. The second part is devoted to the design of HVAC systems. The building uses mechanical ventilation with heat recovery, heating is provided by two gas boilers and the need of electricity is provided by a photovoltaic system. Captured rainwater is used effectively. The third part values the building regarding the method of multi–criteria analysis. For this evaluation uses national method SBToolCZ.
|
|
| |
|
|
Robotic workstation for silicon filling of part of “Valve cartridge”
Černý, Jiří ; Tůma, Zdeněk (referee) ; Knoflíček, Radek (advisor)
This diploma thesis is focused on robotized technological workstation (RTW) for production of “Valve cartridge” product. The production workstation, studied in the diploma thesis, is located at IMI Precision Engineering company and is focused on silicon filling. In the introduction a present workstation is evaluated and a present status of industrial robots and robotized workstation is analyzed. In main part of the thesis two solutions for robotic automation are designed, with respect of assigned parameters. The final solution is chosen by method of multicriteria decisional analysis. Project documentation is created for chosen variant including manipulation work cycle and block diagram of RTW control. The thesis includes calculation of capital return. At the final part of the thesis ergonomics and safety of workstation is analyzed; the risks of robotized technological workstation components are also evaluated. Technologists and quality engineer requirements are taken into account during working on the thesis.
|
|
|
Dependence of a price and a building period of selected construction on the technology
Jandová, Renáta ; Aubusová,, Alena (referee) ; Tichá, Alena (advisor)
The thesis focuses on the dependence of price and building period of selected construction on the technology of the certain object. Three different technologies are being compared regarding the supporting structure of the bridge. The first two technologies consider girder prefabs and the third technology involves a monolithic support plate. The technological method no. 1 is implemented through assembling of the girders via conveyor line with the assistance of mobile cranes; the method no. 2, on the other hand, implies the whole assembly from below the bridge also using mobile cranes. The method no. 3 is monolithic – the wooden basis is covered with concrete layer. The dependence of construction time and price is carried out by the comparison of methodologies through budgets, schedules, multi-criteria ratings and economic ratings.
|
guest ::
