|
|
Apartment Building - Design of Selected Reinforced Concrete Elements
Jakoubek, Lukáš ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the continuous static solutions of monolithic reinforced concrete ceiling construction and the three-flight staircase in the five-storied apartment house. The entire structure is designed from concrete. To determine the effects of internal forces used computational design of Scia Engineer 2013.1. Assessment of the elements is performed by the first limit state. Work includes developing a static calculation, design reinforcement drawings, shapes and reinforcement drawings solved elements.
|
|
|
Design of concrete structure of gym in Olomouc
Bohatec, Jiří ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the design and assessment of reinforced concrete slabs above the 1st floor in a gym in Olomouc. The proposal will be implemented in two versions, monolithic and pre-fabricated. The resulting design will be compared at the end. It is also proposed monolithic staircase. Ceiling plate will be assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Single-family house
Kadlec, Aleš ; Berka, Pavel (referee) ; Donaťáková, Dagmar (advisor)
For the solution of a bachelor work is used a new-build house in Dyjákovice. The object has two above-ground floors. It is projected from a ceramic system Porotherm with a monolithic ceiling tile. A roofing consists of mono-pitched roof with a wooden truss construction. The house is projected for four people.
|
|
|
Technological phase of the upper structure of the nursery building in Habry
Štípa, David ; Nečasová, Barbora (referee) ; Venkrbec, Václav (advisor)
The aim of the bachelor thesis is a technological solution of rough upper structure of a kindergarden in Habry. The main aim of the thesis is the brick support construction and the ceiling contruction. The thesis also includes a site layout with broader relations to traffic routes, budget for the technological procedure, technical report, technical report for site equipment, technological directive for the construction of ceiling and support brick structure, Inspection and check plan, time schedule, concept of machinery setup and safety and protection of health during work.
|
|
|
Design of the bridge in the industry area
Lipus, Rostislav ; Svoboda, Adam (referee) ; Klusáček, Ladislav (advisor)
The aim of this bachelor‘s thesis is the design and analysis of the concrete bridge in industrial area across river Balinka. Thesis contains static analysis of single span bridge which was chosen from three variants. Final variant is sloping prestressed concrete deck supported by two supports. Calculations were made by Scia Engineering software and compared with manual calculation. The supporting structure is assessed for the ultimate limit state and serviceability limit state The design is created in accordance with ČSN EN 1992-2. This thesis does not contain the time dependent analysis.
|
|
|
Pedestrian bridge formed of a stress ribbon structure
Sedlářová, Lucie ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The theme of this bachelor thesis is a design of a footbridge across the river. The thesis deals mainly with static solution of footbridge formed by a concrete stress ribbon. The calculation of internal forces was done by using calculating program Scia Engineer. The other calculations for assessment and design of reinforcement were done by hand according to valid standards. The thesis disregards stages of construction and rheological effects which would affect the construction.
|
|
|
Slab bridge in Újezd at Brno
Dočkal, Miloš ; Koláček, Jan (referee) ; Panáček, Josef (advisor)
The subject of bachelor´s thesis is to design a bridge construction in Újezd u Brna. The bridge is part of a local road and it is used to transfer across the river Litava. The bridge construction is designed in two variants. The chosen variant is prestressed concrete construction with a lenght of 19,8 metres and a width of 5,6 metres. The calculation of loads is deal with software Scia Engineer 2012 and the results are verified with manual calculation. The construction is manual-calculated according to Eurocode.
|
|
|
Multifunctional building
Tkadlec, Martin ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
This final thesis concerns the new building of mixed-use building in Zlin. It has two floors partly below ground level and two floors above ground. There are garages, cellar boxes and nonresidential spaces. There are offices and their hinterland and one flat in the 2nd floor. There are residental units in the 3rd and 4th floor. The building is designed in irregular shape. The roof is flat. There is the contact thermal insulation. There are designed gas boilers for heating. The supporting structure of the ceiling is monolithic concrete slab.
|
|
|
Multifunctional building
Fátor, Martin ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
This final thesis concerns the new building of mixed-use building in Hořice. It has one floor partly below ground level and three floors above ground. There are garages for residential area, warehouse and boiler room in 1PP. There are offices and their base in the 1st and 2nd floor. There are 4 residental units in the 3rd floor. The building is designed in a shape of a rectangle. The roof is flat. There is the contact thermal insulation. There is designed gas boiler for heating. The supporting structure of the ceiling is monolithic concrete slab.
|
|
|
The design of reinforced concrete ceiling
Burda, Patrik ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the static solution of monolithic reinforced concrete continuous ceiling and a beam in a single family house. The entire structure of ceiling is designed of reinforced concrete. Software Dlubal RFEM is used to determine the effects of load. It works with the finite element method. Assessment of elements is according to the first limit state and also the second limit state. The thesis includes statics calculation, dimensioning of reinforcement, drawing of shape and reinforcement drawings of solved elements.
|
guest ::
