|
| |
|
|
A new Variant of Production Components "Sole Plate"
Briš, Tomáš ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis aims at forming a new variant of production components „sole plate“ which has a character of a flat block with stepped protrusions. The main points of the work will be component analysis, description of the conditions under which the solution was carried out, description of the current technology, proposal of a new technology as well as their final comparison and the results assessment. The work is focused on forming a more effective manufacturing process which would replace the current one.
|
|
|
Milling Tools Made from Cemented Carbide
Havran, Petr ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis is focused on the development of cutting tools made of cemented carbides. The first part describes the theory of milling, which is necessary to determine the milling parameters. The next section contains an independent division of milling cemented carbide tools, their uses, advantages and disadvantages. The last part is the selection of tools from the catalogs of the world's businesses and overall assessment.
|
|
|
Tools for CNC milling centres
Konečný, Petr ; Madaj, Martin (referee) ; Humár, Anton (advisor)
This thesis is focused on milling tools for CNC milling centers. The first chapter of this thesis deals with a short theory of milling and the characteristics of CNC milling center. In next chapter are divided and described milling tools in terms of use and construction. This chapter also describes tool materials, clamping, coating and marking of these tools. The practical part is devoted to production assortment of mills from major producers. It is an analysis, description and evaluation of assortments of these producers. For this purpose were selected companies Sandvik Coromant and Pramet Tools.
|
|
|
Milling of the flat surfaces on the CNC Machines
Kolesa, Jan ; Fiala, Zdeněk (referee) ; Kalivoda, Milan (advisor)
The purpose of the bachelor thesis is a generaldescription of the milling of flatsurface of components on CNC machines. The introductory part of the thesis deals not only with the generaltheory, but also with a number of millingissues. The next part of the bachelor thesis containdifferentiationof millingtools and CNC machines. The last part of the thesis deals with particularproductionassortments and certainmanufacturers of machinetools operating in our market.
|
|
|
Production of a presentation article using the CAD/CAM technology
Veselý, Lukáš ; Kalivoda, Milan (referee) ; Sedlák, Josef (advisor)
Bachelor thesis deals with general terminology and technology of machining - particularly milling with description of tool materials for cutting tools. Part of thesis is creating scheme and model of presentation object with software Autodesk Inventor Professional 2010. Last part of thesis is focused on creating a blueprint and machining strategy with CAM software PowerMill v. 9, verification of created lanes creation itself on vertical milling machine FV 25 CNC with guiding system Heidenhain iTNC 530.
|
|
|
Machine for the recovery of road signs on roads
Malchárek, Martin ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
Object of this bachelor’s thesis is machine for the removing road signs on roads. Bachelor’s thesis involves background research with selection of similar machines on the market. Next part is focused on self design of the machine. Requirement of the design was simplicity of producing and high comfort for operator. This design is supported by calculations of basic parameters, V-belt transmission and strength check of shaft with tools.
|
|
|
Milling cutters for CNC machine tools
Janošek, Martin ; Sámelová, Vendula (referee) ; Humár, Anton (advisor)
My bachelor thesis is about milling cutters for CNC machine tools. First the thesis deals with milling theory. There are fission tools or fission machines. Next chapter is about holding tools. The practical part deals with an assortment of production of milling tools for milling flat surfaces made by three milling tools producers. These are Sandvik Coromant, Pramet Tools and Walter companies. In the end of my work these companies are evaluated from different points of view.
|
|
|
Milling tools for CNC machine tools
Vampola, Lukáš ; Forejt, Miloslav (referee) ; Humár, Anton (advisor)
In this bachelor’s thesis are described milling tools for CNC machine tools. The first part is target the CNC milling machines and CNC machining centres. The main set eyes on tool holder magazines and type of tools for CNC machine tools. In next part of thesis are described milling tools. Description and partition are performed in light of construction, marking, tool materials and using. There are wrote advantage, disadvantage and using tools or material for tools. Re-placeable cutting edges from sintered carbides are most used for milling on the present. Pivotal part of bachelor’s thesis is attended to range of products for milling from renowned producers. I chose Sandvik Coromant and Pramet Tools from many notable concerns.
|
|
|
NOISE DOSIMETER LOAD FEEDING MICHACIMI ROLLING STOCK
PAZDERA, František
Subject baccalaureate work deal with noise dosimeter load feeding mix rolling stock. Metering proceeded on five cooperatives namely Pluhuv Ždár, Agra Deštná, Reprogen Chlebov, Nová Ves u Chynova and privacy farmer Mika. In work are mentioned individual technical data used feeding spinal cord wagons. Metering to have been mentioned in graph. These graph, were compared with Czech governmental standard 01 1600 {\clq}q acoustics and with a collection of laws 502/2000. Resulting funds are mentioned in tables.
|
guest ::
