|
|
Single-family house
Kroupová, Julie ; Bantová, Sylva (referee) ; Krupicová, Jana (advisor)
The purpose of the bachelor's thesis is the design of a single-family house for four people. The first part of the project is documentation for construction of the building, the second part is focused on utilities – heating, air conditioning. The building plot is chosen in a small village Radvanice near the town Přerov. The building has two above-ground floors. On the first floor is garage connected to the entrance, which is located to the northwest, utility room, toilet, pantry, and the kitchen open-up to the dining room and living room. On the second floor is private space. There are two children's bedrooms, storage room, study room, bathroom with toilet and master bedroom with private bathroom and walk-in-closet. The building is based on plain concrete foundations. Structural system is masonry. The loadbearing walls are design from Porotherm – ceramics blocks filled with mineral insulation. The house is designed with air to water heat pump, underfloor heating, and mechanical ventilation with heat recovery.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
|
|
Revitalization of a multi-purpose building in the village
Federla, Jakub ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.
|
|
|
Bravia administrative building
Jiruška, Daniel ; LIpka, ing Miroslav (referee) ; Eliáš, Luboš (advisor)
The aim of the Diploma thesis is the project documentation for the execution of the administrative building. This is an administrative building located on the outskirts of Letohrad. The building consists of one section that has three above-ground floors and one section that has only one above-ground floor. The building is used for administration, trade and storage. For administrative work is designed the three-storey part of the building and single-storey part of the building is designated for trade and storage. The main entrances to the building are located on its west side and the next entrances to the building is located on its southern side and northern side. The building is based on foundation strips and pads of plain concrete. The building is designed from a masonry structural system made of concrete blocks made of lightweight concrete and the third floor is partly designed as a timber structure made of wooden KVH squared timber. The ceiling structures are designed from prestressed ceiling panels. Roof structure above the main part of the building is designed two-stage pitched roof octagon shape and the roof above the single-storey part of the building is designed as warm flat extensive green roof.
|
|
|
Kindergarten and primary school in Škrdlovice
Peňáz, Zdeněk ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of this master project is to design a nzeb kindergarten and primary school in Škrdlovice. The building has three parts: kindergarten and primary school with 2 above–ground floors and basements are connected with a single canteen. The canteen has a flat extensive green roof, while the kindergarten and primary school have saddle roof. The kindergarten has two identical floors with playrooms, locker rooms, bed and toy storage, teacher’s office, and bathrooms. First floor of the primary school contains locker room, teacher’s’ offices, it classroom, afterschool centre, and toilets. Three classrooms, headmaster’s office, and toilets are in the second floor. The building is designed using Xella building system. The external load–bearing walls, slabs, and internal non–bearing walls are made of aerated concrete blocks. The internal load–bearing are made of lime–sand blocks. The building is insulated with non–fibrous mineral panels. The project includes design of lightning, HVAC, DHW, and photovoltaics systems. The project also includes a study of three structural details including 3D models in BIM software and their thermal assessment. The project was designed using BIM software Revit.
|
|
|
Boarding House Amerika
Pokorný, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This diploma thesis elaborates project documentation for the construction of building. The building is situated in outskirts of the town Velké Meziříčí. The boarding house for fooding and lodging with separated private zone and restaurant. Both parts connect entrance hall with reception and communication spaces. The lodging section is divided into three stories. Ground floor restaurant and salon with terrace on the second floor have south-facing oriented glazed curtain wall. That is the main part of building with stunning views on the ambient nature.
|
|
|
Kindergarten
Frieb, Vilém ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The aim of this master project is to design a nearly zero-energy building of kindergarten. The kindergarten is designed as one storey building with capacity of 40 children split into two playrooms. Playrooms are separated and each of them has own sanitary facilities and locker room. Playrooms have large windows with external blinds on the south to provide solar gains. There is horizontal sun breaker above the windows which prevent overheating in summer. Load bearing walls are made of sand lime blocks. Walls are insulated with mineral wool board. Roof ceiling is made of prestressed concrete slabs. The building has a flat extensive green roof. The second task of the project includes design of lighting, rainwater harvesting, HVAC, source of heat and photovoltaic system. The third part is theoretical and includes searching for an ideal source of energy for the building. There are two types of heating compared such as gas boiler and a groundwater heating pump. The main software used for the project is Revit.
|
|
|
Accommodation house, Pec pod Sněžkou
Goroľová, Viktorie ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
This diploma thesis elaborates project documentation for the construction of building. The object is located in the mountain area in Pec pod Sněžkou. The acommoation house is designed as a building for fooding and lodging. The building has three stories. Ground floor is nonresidental and partly on slop. There are garages, bicycle storage and staffroom. On the first floor there is a small restaurant and rooms for accommodation. From those rooms you can go on the ground or terrace. The second floor is entirely residential. The total accommodation capacity of the hotel is 46 people.
|
|
|
Family house - Rudoltice
Jiruška, Daniel ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The aim of the Bachelor thesis is the project documentation for the execution of the basement building. This is a family house, located in the village of Rudoltice in the district of Ústí nad Orlicí. The family house consists of two floors and serves to permanent living of a four-member family and to run a hairdresser. The main entrance to the building is located in a basement between a separate entrance to the hairdresser and a garage, which is designed for one car. The rest of the basement serves predominantly for storage and technical background. The above-ground floor is designed exclusively for living and includes an outdoor terrace and loggia. The building is based on strip foundations of plain concrete and permanent formwork. The basement of the building is designed from a permanent formwork DEK and brick ceramic blocks POROTHERM. The above-ground floor is designed as a wooden building constructed of wooden panels NOVATOP from cross laminated timber. Ceiling structures above the basement are designed from the POROTHERM system using ceiling beams POT and ceiling inserts MIAKO. The ceiling and roof structures of the wooden part of the building are designed from wooden panels NOVATOP ELEMENT. The entire building is roofed with a ventilated roof composed of the two roof planes.
|
|
|
Detached family house, Valašské Klobouky
Fojtů, Ondřej ; Novotný, Miloslav (referee) ; Müller, Jan (advisor)
The bachelor’s thesis deals with the new detached family house witch is situated in the town’s residential area of Valašské Klobouky. The land has a sloping character. The building is a two-floor, partial basement house with a garage and a terrace in the ground-shaped rectangle with dimensions 11x14 m. The object is designed for a four-member family. The external and internal vertical structures are made of sand-lime blocks of the KM BETA SENDWIX system, horizontal structures are made of reinforced concrete floor. The house is insulated with the ETICS contact isulation system. The bulding is roofed with hipped roof of wooden trusses with a slope of 15. The bachelor’s thesis has the form of design documentation for the building process.
|
guest ::
