|
|
Experimental validation of active flow control concept for automotive applications
Sobotka, Vojtěch ; Jebáček, Ivo (referee) ; Popela, Robert (advisor)
Tato diplomová práce obsahuje komplexní návrh systému aktivního řízení proudu instalovaného na osobním voze Škoda Roomster. Tato práce navazuje na výzkum provedený VUT a TUB na vozidle Volkswagen UP! Návrh lze rozdělit na tři základní části - návrh spoileru, návrh závěsů a návrh vyfukovacího systému. V každé z těchto částí je návrh detailně popsán a potřebná výkresová dokumentace je součástí práce v její příloze. Pro potřeby návrhu vyfukovacího systému bylo provedeno jeho testování. Výsledky testu jsou v této části uvedeny. Práce také obsahuje komplexní popis sestavení celého systému a jeho instalace na automobil.
|
|
| |
|
| |
|
| |
|
|
Analysis of the surface after laser cutting
Narovec, David ; Sedlák, Josef (referee) ; Osička, Karel (advisor)
This diploma thesis discusses laser cutting and the consecutive surface treatment of cut parts. The theory of laser cutting is described in the first part of this thesis, including laser history and the laser emergence principle. Cut parameters and the influence of the laser cutting on the material are described later on. The next part describes the laser cutting technological possibilities and other laser technology utilization options are outlined. In the last theory part, metal surface treatment used in the experiment is covered. Coating thickness is evaluated in the practical part of this thesis, as well as roughness, microhardness, chemical microanalysis and metalography. The evaluation of the results achieved, and optimal surface treatment execution suggestions are addressed in the last part of this thesis.
|
|
| |
|
|
Study cutting quality of flame cutting of limit thicknesses depending on the diameter of the focal spot during laser cutting of material
Maňas, Petr ; Kaván, Martin (referee) ; Mrňa, Libor (advisor)
Experimental work evaluated the dependence of the thickness of the cutting edge, its roughness and assessment of appearance with regard to the defects resulting from the diameter of the focal spot during oxidative cutting Yb:YAG laser. Other variables include the experiment: process parameters such as laser power, cutting speed, oxygen pressure and focus position. Experiment is based on the Taguchi tables. Test samples were cut off from sheet thickness 10, 15 and 20 mm. Representatives of conventional steel were S235JRC+N, S235JR, S235JR+N and steel type RAEX developed for laser and plasma cutting. Samples were evaluated according to the ČSN EN ISO 9013. The evaluation of samples was into classes according to standards of quality. Hardness measurements were performed on the samples thickness 20 mm of convectional steel and steel type RAEX.
|
|
|
Technology of Production Parts solar Panels
Midrla, Zdeněk ; Sedlák, Josef (referee) ; Osička, Karel (advisor)
This work is focused on a proposal of technological production process of components of a solar panel. The proposal of technological production process is suggested in terms production series of 9000 of pieces per year. The work also contains an analysis of construction of all components of the air separator equipment. There are suggested variants of stocks for some of the components. It also includes a selection of the most favourable variant in terms of material usability and practical aspect as well. There is an technological production process designed by the chosen varinat including of a production instructions.
|
|
|
Study of quality cutting edge of aluminum and copper alloys for fusion cutting in depending on the process parameters during laser cutting using a fiber YbYAG laser
Pilarčík, Edmund ; Kaván, Martin (referee) ; Mrňa, Libor (advisor)
The diploma thesis discusses laser cutting of non-ferrous metals using fiber YbYag laser and evaluation of the roughness of cutting edge samples. To manufacture samples of aluminium Al 99,5, deoxidized copper Cu – DHP and brass CuZn37 were used combinations of process parameters according to Taguchi statistical method. Samples were subsequently evaluated, according to the ČSN EN ISO 9013 standard and sorted into roughness cathegories, and by technical and economical evaluation, the most economical process parameter combinations were found. Experimantal part is preceded by description of general methods of cutting, description of laser types, process parameters and their influence on the occurrence of the cutting edge defects and description of roughness measurement and standard ČSN EN ISO 9013.
|
|
|
Measurement of cutting edge roughness in the process of laser metal cutting using the Yb-YAG laser
Maňas, Petr ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
The project elaborated in frame of bachelor´s degree program B-STG (“Mechanical Engineering Technology”, 2303R002), evaluates the roughness of samples of cutting edge laser cutting. Cutting performed the fiber Yb:YAG laser. The samples consisted of structural steel J235JR and DC01, stainless steel X5CrNi18-10 and aluminium alloys AIMg3. They were evaluated according to the ČSN EN ISO 9013 standard. The classification of samples into classes according to the standards of accuracy. The theoretical part is consists of a description of the methods of cutting, a basic principle of the laser and its types. It includes cutting parameters and their influence on the quality of subsequent defects. It is described roughness measurement and standard ČSN EN ISO 9013.
|
guest ::
