|
|
MW Converter for SW Receiver
Lejsková, Alena ; Lukeš, Zbyněk (referee) ; Šebesta, Jiří (advisor)
This thesis concerns about the network synthesis of receivers with the demand for conversion of the input signal and a following implementation of assigned converter. At first it introduces the readers with the basic division of radio waves and with parts, which are important for a high-quality receiver, then it deals with general properties of input networks of receivers, division of parts and kinds of connection, that are used in the communications. The concept of connection is intended to nonspecialists too, that is why it describes step by step each of parts of the network, including the calculation or possible solution and the choice of convenient parts. The aim is also to present the frequency conversion as an important part of signal receiving that we want to use in communication systems.
|
|
|
Debugging Information in Linker
Nikl, Vojtěch ; Křoustek, Jakub (referee) ; Masařík, Karel (advisor)
This thesis describes the conversion between the CCOFF object file format and the ELF file format. We start with a general object file format and its debbuging information, then we focus closely on the ELF, CCOFF and DWARF debugging information. The functionality of the CCOFF format is encapsulated in the ObjectFile class library. Then follows the description of creating an ELF object file, its filling with the proper data and its conversion back to the CCOFF format.
|
|
|
MTC and LTC Sync Code Converter
Miškařík, Vít ; Hanák, Pavel (referee) ; Krajsa, Ondřej (advisor)
Converter of sync codes MTC to LTC is very important device to synchronize all devices which are being used for editing and other work with audio and video. Most of digital equipment can sync to MTC but LTC timecode is recorded od audio or videotape. Therefore this converter is needed to sync all connected devices to recorded timecode. This thesis is about designing and constructing the converter between these timecodes.
|
|
|
Optical Convertors
Chleboun, Jan ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
Optical converters are used in various types of optical networks to provide end-users of data and voice services and also allow reception of television broadcasting, which is transmitted through optical media. The current trend is the construction of FTTH networks (Fiber To The Home), which, thanks to optical fibre, have reduced the speed or capacity, as in the case with metallic networks. The proposal is the need to consider positive and negative factors associated with building of concrete network with a specified number of users and location. Each network consists of passive and active components. Passive can be used for transmission of information, therefore they are mainly elements transmission medium. Active part includes elements for sending and receiving information transmitted by optical media. Transmitters vary their technical implementation, quality and reliability. This obviously affects the price of both active and passive parts. The cost of the operation of the network are also increased with demands of control. The advantage is the efficient management, which is guaranteed by return of the cost to build a FTTH network. Optical network with a system of remote management converters is a new trend of optical communications.
|
|
| |
|
|
Historical development of steel manufacturing processes in the 20th century
Vácha, Pavel ; Pernica, Vítězslav (referee) ; Šenberger, Jaroslav (advisor)
The introductory part of theses is devoted to the characteristics of the iron and steel, production of crude iron and steel. The following chapter focuses on the description of the processes of steel production during the period of industrial revolution. Theses is continuing with a part containing an overview of modern technologies for steel production in the 20th century. There are methods of steel production of its largest producers presented in the final part since the early 20th century to the present, focusing on the territory of today's Czech Republic with division into four periods.
|
|
|
Converter USB/RS 485
Henzl, Václav ; Hanák, Pavel (referee) ; Herman, Ivo (advisor)
This thesis is describing problematic of realisation of converter from USB type media into the universal RS-485 bus which is mainly used for the industrial applications (author is using frequently as a device in order to enable communication between server and RFID devices). This thesis contains theoretical information, realisation of the device itself and assesment of reached targets.
|
|
|
Microwave transverter for 5 760 MHz to 146 MHz
Šustr, Jan ; Šnajdr, Václav (referee) ; Lukeš, Zbyněk (advisor)
This work deals with a design of the microwave transverter for 5 760 MHz to 146 MHz. It is divided to a few parts. The first one is focused to design of the local oscillator which generates the signal at frequency f = 116.9583MHz. The oscillator is designed like a crystal oscillator. Its output signal is multiplied and amplified in a second part. The next parts deal with design of the band pass filters. There I chose the design of the filters and did the measurements. The microwave receiver and transmitter circuits are designed with the modern monolithic circuits. The main job of this part is to design low noise amplifier and the power amplifier. At the end of this work I do the measurements and the comparison with the simulations.
|
|
| |
|
|
Debugging Information in Linker
Nikl, Vojtěch ; Křoustek, Jakub (referee) ; Masařík, Karel (advisor)
This thesis describes the conversion between the CCOFF object file format and the ELF file format. We start with a general object file format and its debbuging information, then we focus closely on the ELF, CCOFF and DWARF debugging information. The functionality of the CCOFF format is encapsulated in the ObjectFile class library. Then follows the description of creating an ELF object file, its filling with the proper data and its conversion back to the CCOFF format.
|
guest ::
