|
|
Pillar jib crane
Dias, Aleš ; Řezníček, Milan (referee) ; Malášek, Jiří (advisor)
The aim of my work is conceptual design pillar jib crane including important strength calculations. Payload is 1500 kg and length jib is 4 000 mm. The pillar jib crane is working near the wall and angle turning is 180°. The work also includes the selection lifting gear with manufacturer´s catalog.
|
|
|
Hooclift NKH 8A340
Doleček, Ladislav ; Ospalík, Zdeněk (referee) ; Kašpárek, Jaroslav (advisor)
This master thesis analyses hook loader NKH 8A340. For calculation of load states was used the dynamic simulation in program MSC.ADAMS. This results were used like a input data to solve the construction with finished element method. After evaluation of results were made design changes of hook loader. Part of this thesis contains drawings of modified parts of hook loader.
|
|
|
Pillar jib crane
Kramoliš, Robert ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is constructional proposal of jib crane with capacity of load 1000 kg, unloading length of its beam is 4000 mm and lift height 4900 mm. The thesis contains strength calculations and selection lifting gear. A part of the work is also drawing documentation.
|
|
|
Pillar jib crane
Dvořák, David ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deal with the construction design of derrick crane with these technical parameters: lifting capacity is 1700 kg, unloading length is 3150 mm and height of lifting is 5850 mm. The thesis contains strength calculations for proposals major structural elements and selection of suitable hoist. A part of the work is also assembly drawing and detailed drawing of pillar.
|
|
|
Hydraulic lifting equipment for the tractor
Onderka, Jan ; Zeizinger, Lukáš (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis focuses on designing a lifting device for a tractor three-point hitch. A short research of similar lifting devices was carried out. The concept is designed and supported by analytical calculations of dimensional and functional properties. The strength calculations are carried out in accordance with the standard, and critical areas of the device are checked. The work contains 3D models and plan drawings.
|
|
|
Pillar jib crane
Flídr, Lukáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the structural design of the column crane, including important strength calculations. This thesis also includes a selection of a suitable hoist and drawing documentation in the form of a crane assembly and a pole drawing.
|
|
|
Pillar jib crane
Kramoliš, Robert ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is constructional proposal of jib crane with capacity of load 1000 kg, unloading length of its beam is 4000 mm and lift height 4900 mm. The thesis contains strength calculations and selection lifting gear. A part of the work is also drawing documentation.
|
|
|
Pillar jib crane
Dvořák, David ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deal with the construction design of derrick crane with these technical parameters: lifting capacity is 1700 kg, unloading length is 3150 mm and height of lifting is 5850 mm. The thesis contains strength calculations for proposals major structural elements and selection of suitable hoist. A part of the work is also assembly drawing and detailed drawing of pillar.
|
|
|
Aviation maintenace crane
Bureš, Martin ; Šťastný, Antonín (referee) ; Pokorný, Přemysl (advisor)
This master´s thesis solves design of a mobile crane for handling air aggregates and ejection seats. Handling crane provides lifting a maximum weight of 300 kg to a height of 4600 mm. Subject of the work is the choice of appropriate technical solutions, design of lifting mechanisms, supporting structures and accessories. The suitability of the solution is checked by strength analysis of individual units. Another task is to provide mobility equipment and control stability against overturning. The appendix includes protocols static analysis of the program Nexis32, drawing overall crane assembly and manufacturing drawings selected parts.
|
|
|
Hooclift NKH 8A340
Doleček, Ladislav ; Ospalík, Zdeněk (referee) ; Kašpárek, Jaroslav (advisor)
This master thesis analyses hook loader NKH 8A340. For calculation of load states was used the dynamic simulation in program MSC.ADAMS. This results were used like a input data to solve the construction with finished element method. After evaluation of results were made design changes of hook loader. Part of this thesis contains drawings of modified parts of hook loader.
|
guest ::
